Robotics By RTELLIGENT

• Ethernet Stepper Driver: 24-50V DC, 6.0A output current. Size: 134 * 82 * 29mm (5.28 * 3.23 * 1.14 inches)
• Current Control: New pentagon connection SVPWM algorithm and PID control
• Instruction Smoothing: S-shaped curve optimization, 1~512 levels can be set
• Application: This EPR60 stepper motor driver can control almost all of 2 phase open loop nema 23/24 stepper motors 57/60mm flange whose current is under 6.0A.
• Warranty: Our step driver CNC controller has 12 months warranty. CE, ISO Certificated

• Features: 2 phase, 1.8 degree step angle, 2.2Nm holding torque, 4.0A Rated Current, 4-wire
• Advantage: The stepping motor is featuring low vibration, low noise, low heating, high speed
• Driver: 24~50VDC power supply, 1.4A~5.6A output current peak (8 current modes optional). Support PUL/DIR modes. Size:118*76*33mm (4.65*2.99*1.30 in)
• Default Connection: Black (A), Red (B), Green (C), Blue (D)
• Application: This stepper motor and driver kit is widely used for 3D printers, medical equipment, industrial equipment, laser, CNC machine, automatic devices

• Nema 23 stepper motor, 2.0Nm holding torque
• Stepping motor with 1.8 degree, 4-wire, 2 phase, 8.00mm shaft diameter
• Bipolar stepper motor 57*57*76mm, weight 1.2kg
• Stage stepper motor 3.5A rated current, resistance 0.75Ohms
• Industrial stepper motor for face mask machine, cutting machine, marking machine cnc router motor

• Bipolar Stepper Driver R60-D : 24~50VDC power supply, 0.3A~5.6A output current peak (16 current modes optional). Speed range: 0-450(8 Speed modes optional) Size:118*76*33mm (4.65*2.99*1.30 in)
• Two Axis Stepper Driver R60-D: R60-D drives the two-axis motor independently to avoid the interference within the back electromotive force and achieve independent operation and synchronized movement.
• R60-D Control Signal: Spontaneous pulse; R60-D Speed setting: Regulation by potentiometer; Speed value: Potentiometer; Travel value: Speed x switching time
• Independent Operation/Synchronized Action: The one-driving-two drive is for two-axis synchronization application, in a control mode of internal spontaneous pulse, and it can drive two stepper motors to run synchronously.
• Warranty: Our stepper driver controller has 12 months warranty. CE, ISO Certificated