Robotics By SparkFun

• Same kit, new case! The SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction (compatible with) the Arduino programming language.
• The SIK includes everything you need to complete five overarching projects of 16 interconnected circuits that teach everything from blinking an LED to reading sensors.
• Includes: SparkFun RedBoard Qwiic, (compatible with) Arduino and Breadboard Holder, SparkFun Inventor's Kit Guidebook, White Solderless Breadboard, SparkFun Carrying Case, SparkFun Mini Screwdriver.
• Also Includes: SparkFun Carrying Case, SparkFun Mini Screwdriver, 16x2 White-on-Black LCD (with headers) SparkFun Motor Driver (with Headers) Pair of Rubber Wheels, Pair of Hobby Gearmotors, Small Servo.
• In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.1.2, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide.

• More reliable Edge connector for easy use with the micro:bit
• Full H-Bridge for control of two motors
• Control servo motors
• I2C port for extending functionality
• Power and battery management onboard for the micro:bit

• Features: EOS S3 MCU + eFPGA SoC: Arm Cortex-M4F Microcontroller: up to 80 MHz operating frequency; up to 512 KB SRAM. Embedded FPGA (eFPGA): 2400 effective logic cells; 64 Kb RAM
• Thing Plus Form Factor: Breadboard-compatible 0.1\" (2.54 mm) pitch headers; 2.75\" x 0.9\" (70 mm x 22.9 mm) footprint; All 20 Feather-defined GPIO + 14 additional GPIO. Interfaces: SWD programming connector for use with USB-TTL converter; USB data signals are tied to eFPGA programmable logic; UART available via I/O headers; I2C available via I/O headers, and Qwiic Connector, SPI, I2S
• Storage: 16 Mbit SPI NOR flash - GigaDevice GD25Q16CEIGR. Sensors: 3-Axis 12-bit Accelerometer - STMicro LIS2DH12TR; Digital pulse density modulation (PDM) microphone with Wake-on-Sound (WoS) feature - Vesper VM3011-U1
• User Interfaces: RGB LED; User pushbutton; Reset pushbutton. Power: USB Type-C connector (regulated to 3.3 V), Single Cell LiPo battery (not included); On-board charging circuitry - Microchip MCP73831/2; Standard LiPo JST connector
• Software: Machine Learning: TensorFlow Lite and SensiML. Real-time Operating Systems: Zephyr RTOS and FreeRTOS. FPGA Tools: SymbiFlow and Renode

• Same kit, new case! The SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction (compatible with) the Arduino programming language.
• The SIK includes everything you need to complete five overarching projects of 16 interconnected circuits that teach everything from blinking an LED to reading sensors.
• Includes: SparkFun RedBoard Qwiic, (compatible with) Arduino and Breadboard Holder, SparkFun Inventor's Kit Guidebook, White Solderless Breadboard, SparkFun Carrying Case, SparkFun Mini Screwdriver.
• Also Includes: SparkFun Carrying Case, SparkFun Mini Screwdriver, 16x2 White-on-Black LCD (with headers) SparkFun Motor Driver (with Headers) Pair of Rubber Wheels, Pair of Hobby Gearmotors, Small Servo.
• In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.1.2, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide.

• More reliable Edge connector for easy use with the micro:bit
• Full H-Bridge for control of two motors
• Control servo motors
• I2C port for extending functionality
• Power and battery management onboard for the micro:bit

• Features: EOS S3 MCU + eFPGA SoC: Arm Cortex-M4F Microcontroller: up to 80 MHz operating frequency; up to 512 KB SRAM. Embedded FPGA (eFPGA): 2400 effective logic cells; 64 Kb RAM
• Thing Plus Form Factor: Breadboard-compatible 0.1\" (2.54 mm) pitch headers; 2.75\" x 0.9\" (70 mm x 22.9 mm) footprint; All 20 Feather-defined GPIO + 14 additional GPIO. Interfaces: SWD programming connector for use with USB-TTL converter; USB data signals are tied to eFPGA programmable logic; UART available via I/O headers; I2C available via I/O headers, and Qwiic Connector, SPI, I2S
• Storage: 16 Mbit SPI NOR flash - GigaDevice GD25Q16CEIGR. Sensors: 3-Axis 12-bit Accelerometer - STMicro LIS2DH12TR; Digital pulse density modulation (PDM) microphone with Wake-on-Sound (WoS) feature - Vesper VM3011-U1
• User Interfaces: RGB LED; User pushbutton; Reset pushbutton. Power: USB Type-C connector (regulated to 3.3 V), Single Cell LiPo battery (not included); On-board charging circuitry - Microchip MCP73831/2; Standard LiPo JST connector
• Software: Machine Learning: TensorFlow Lite and SensiML. Real-time Operating Systems: Zephyr RTOS and FreeRTOS. FPGA Tools: SymbiFlow and Renode