Robotics By Waveshare

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. 3.5inch resistive touch screen, 65K colorful, bringing clear and vivid display effect
• Standard 3.5mm audio jack, for headphone or other audio peripherals. Micro SD card slot through the SDIO interface, faster access speed than SPI interface
• Integrates battery header and recharge circuit, allows it keep running without wired power supply
• Other rich resources like buzzer, photoresistor, and RGB LED...
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

• This environment sensors module gives Jetson Nano Developer Kit the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc.It can also be used to build a robot that can detect motion and orientation.
• Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light. Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
• Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer. Onboard Si1145 sensor, for measuring IR/UV rays
• Onboard SGP40 sensor, for detecting ambient VOC. Onboard 1.3inch OLED display, for displaying environment data in real time
• I2C bus, allows reading and displaying data by just using two wires. Comes with development resources and user manual (python examples)

• 10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.
• MPU9250: 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer Internal Digital Motion Processing (DMP) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc. Comparing with MPU6050, it is lower power consumption, and more suitable for wearable devices
• BMP280: barometric pressure sensor Embedded temperature sensor for temperature compensation Comparing with BMP180, it is lower power consumption, and higher performance
• You can get the 10 DOF data through I2C interface
• Power: 3.3V~5.5V (internal voltage regulation with low dropout)

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. 3.5inch resistive touch screen, 65K colorful, bringing clear and vivid display effect
• Standard 3.5mm audio jack, for headphone or other audio peripherals. Micro SD card slot through the SDIO interface, faster access speed than SPI interface
• Integrates battery header and recharge circuit, allows it keep running without wired power supply
• Other rich resources like buzzer, photoresistor, and RGB LED...
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

• 10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.
• MPU9250: 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer Internal Digital Motion Processing (DMP) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc. Comparing with MPU6050, it is lower power consumption, and more suitable for wearable devices
• BMP280: barometric pressure sensor Embedded temperature sensor for temperature compensation Comparing with BMP180, it is lower power consumption, and higher performance
• You can get the 10 DOF data through I2C interface
• Power: 3.3V~5.5V (internal voltage regulation with low dropout)

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
• Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
• Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer. Onboard LTR390-UV-1 sensor, for measuring UV rays
• Onboard SGP40 sensor, for detecting ambient VOC. I2C bus, allows retrieving data by just using two wires
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)