PCB size:1.52cm x 2.22cm Working Voltage: 5 Volt DC Output: 4-5 Volt DC
On detecting a laser signal, output goes at high level (5V) until laser signal is there. NOTE: This sensor is non-modulator, to be used indoors away from any bright light or direct sunlight.
Xcluma 20kg Load Cell Weight Sensor with HX711 ADC Converter - Product Features
Two selectable differential input channels.On-chip active low noise PGA with selectable gain of 3264 and 128.On-chip power supply regulator for load-cell and ADC analog power supply.On-chip oscillator requiring no external component with optional external crystal On-chip power-on-reset.
Simple digital control and serial interface: pin-driven controlsno programming needed.Selectable 10SPS or 80SPS output data rate.
Simultaneous 50 and 60Hz supply rejectionCurrent consumption including on-chip analog power supply regulator: normal operation < 1.5mApower down < 1uA.
Operation supply voltage range: 2.6 ~ 5.5V
Operating Temperature Range:-20 degree ~ +85 degree
xcluma Dht11 Digital Relative Humidity & Temperature Sensor Module For Arduino - Product Features
Can Detect Ambient Humidity And Temperature Sensor Dht11
Humidity Measuring Range: 20%-95% (Range 0-50 Degrees) And Humidity Measurement Error: +-5% Temperature Measurement Range: 0-50 Degree Temperature Measurement Error: +-2 Operating Voltage 3.3v-5v
Output Digital Output Fixed Bolts Holes, Is Easy To Install Small Board Pcb Dimensions: 3.2cm*1.4cm
Power Led (Red) Vcc Add-Ins 3.3v-5v Gnd External Gnd , Do Small-Plate Switch Digital Output Interface Connect Monolithic Integrated Circuit Io Mouth
xcluma RCWL-0516 RCWL 0516 Microwave Radar Sensor Human Sensor Body Sensor Module Induction Switch Module - Product Features
Working voltage: 4 ~ 28V
Compared with the traditional infrared sensor PIR, with penetration detection capability
Blocking time, adjustable distance
It could output 3.3V power
xcluma Keyes Infrared Sensor Receiver Module Ky-022 For Arduino - Product Features
Infrared receiving module adopts 1838 infrared receiving head Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity.
Widely used in: stereo, TV, video machine, disc machine, set-top boxes, digital photo frame, car stereo, remote control toys, satellite receivers, hard disk player, air conditioner, heater, electric fan, lighting and other home appliances
xcluma Digital Led Display 6V 12V 24V PWM DC Motor Controller Regulator Variable Speed - Product Features
Input supply voltage: 6V-24VDC
The maximum output power: 240W
The maximum continuous output current :5A;(Peak current 8A)
xcluma L298N Dc Stepper Motor Driver Controller uno Pic Robotics Car Projets - Product Features
Driver Chips: New And Original Dual H-Bridge Driver Ic L298n Power-Driven Part Of The Terminal Range Of Vms: +5 V ~ +30 V Drive Some Peak Current Io: 2a
Logical Part Of The Terminal Supply Area Vss :3.3-5 .5 V Logical Part Of The Operating Current Range: 0 ~ 47ma Control Signal Input Voltage Range: 4.5-5.5v Low High 0v Maximum Power Consumption: 25w
Logical Part Of The Terminal Supply Area Vss :3.3-5 .5 V Logical Part Of The Operating Current Range: 0 ~ 47ma Control Signal Input Voltage Range: 4.5-5.5v Low High 0v Maximum Power Consumption: 25w Storage Temperature: -25 C ~ +130 C Driver Board Size: 43 * 43 * 27mm
xcluma Photo Control Sensor Automatic Street Light Lighting Switch Photocell Photoswitch 10A 220V (As-10 Square) - Product Features
Input Voltage: AC 220 V Max Load Current: 10A Frequency: 50-60H
Color: White & Blue Quantity: 1 pcs Size(Except bracket): approx. 5 x 4.2 x 3.3 cm (H x L x W)
Use: open during the day or night, during the day and switch off the evening off, without manual operation With design, installation, reliable, small size, light weight, easy installation, long life advantages. Widely used in street lighting, highways, factories, gardens, ports, airports, farms, parks, schools and other places.
Xcluma 1kg Load Cell Weight Sensor with HX711 ADC Converter - Product Features
Two selectable differential input channels.On-chip active low noise PGA with selectable gain of 3264 and 128.On-chip power supply regulator for load-cell and ADC analog power supply.On-chip oscillator requiring no external component with optional external crystal On-chip power-on-reset.
Simple digital control and serial interface: pin-driven controlsno programming needed.Selectable 10SPS or 80SPS output data rate.
Simultaneous 50 and 60Hz supply rejectionCurrent consumption including on-chip analog power supply regulator: normal operation < 1.5mApower down < 1uA.
Operation supply voltage range: 2.6 ~ 5.5V
Operating Temperature Range:-20 degree ~ +85 degree
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..