Industrial & Scientific Store - Test, Measure & Inspect

• Powered by 9V layer-built battery, can use 2 li-ion batteries to form a 8.4V battery pack for long time power. Measuring bipolar transistor current amplification factor and base-emitter threshold voltage. Automatic test the pin of a component, and display on the 128 * 64 LCD backlight. Measure the gate and gate capacitance of the MOSFET threshold voltage. One -button operation, automatic shutdown, only 20nA shutdown current. Reverse breakdown voltage less to 4.5V, Zener diode can be identified.
• 2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. Via the base - emitter threshold voltage and high current amplification factor to identify Darlington transistors. Can simultaneously measure two resistors and resistor symbol is displayed. Displayed on the right with a decimal value of 4. Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.
• Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components.
• \"Specifications: Material: PCB Power Mode: 6F22 Display: 128 * 64 LCD backlight Testing Speed: 2 seconds (1 minute is normal for large capacitor) Shutdown Current: 20nA Displayed Value: 25pf-100mF (resolution 1pF) Inductance: 0.01mH-20H Resistance: ?2100 Power Volatge: 9V layer-built battery / 2 li-ion batteries to form a 8.4V battery pack Resolution of Resistance Measurement: 0.1 ohms The Highest Measured Value: 50M ohms Provided Testing Current: Approx. 6mA Product Size: 7.2 * 6.25cm (L * W)\"

• DCV200mV/2V/20V/200V?(0.5%+3)/1000V?(0.8%+10)
• ACV2V/20V/200V?(0.8%+5)/750V?(1.2%+10)
• DCA200uA/2mA/20mA?(0.8%+10)/200mA?(1.2%+8)/20A?(2.0%+5)
• ACA200mA?(2.0%+5)/20A?(3.0%+10)
• Resistance200?(0.8%+5)/2k/20k/200k/2M?(0.8%+3)/20M?(1.0%+25)
• Capacitance6nF?(5.0%+40)/60nF/600nF/6uF/60uF?(3.5%+20)/600uF/6mF/20mF?(5.0%+10)
• Celsius(-20??1000)?? (-4??1832)?<400???(1.0%+5)?400???(1.5%+15)
• Diode & Continuity test

• Material: The caliper is made of brass, which provides durability and corrosion resistance. Brass is often preferred in precision measuring tools due to its stability and resistance to wear.
• Measurement Range: The caliper typically has a measurement range of 100mm (or 10cm), which allows you to measure objects with a length or diameter within that range.
• Graduated Sliding Gauge: The caliper features a sliding gauge mechanism that allows you to precisely measure the length, diameter, or thickness of an object. The sliding gauge usually has a finely graduated scale marked in both millimeters (mm) and inches for versatile measurement options.
• Double Scales: The presence of double scales, in both metric (mm) and imperial (inch) units, enables you to work with measurements according to your preference or the specific requirements of your project.
• Mini Pocket Ruler: The 100mm length of the caliper makes it compact and convenient to carry in your pocket or toolkit, allowing for easy access and quick measurements on the go.
• Versatility: The caliper can be used in various applications where precise measurements are required. In jewelry making, it helps measure gemstones, beads, or jewelry components. In watchmaking, it aids in measuring watch parts and movements. In carpentry, it can be used to measure small dimensions accurately. In leather crafting, model making, and metal workshops, it assists in measuring and fitting components or pieces.
• 4 Inch Brass Vernier Caliper, Jewelry Bead Measuring Tool, Inch, Metric

• BRAND: OCEAN STAR
• MATERIAL : GOOD QUALITY
• Though there are various flow meters integrated with new and advanced features, some are essential
• Minimum and maximum volumetric or mass flows to determine the flow velocity range of the flow meter
• Essential as useful thing

• Universal Interface: This amiciSense optical power meter supports all the three most used optical fiber interfaces i.e. 2.5mm {SC, FC, ST}, you just have to plug the cable and use, thats it. You can now test your fiber optic cables yourself in case of any issue
• Seven Wavelengths Support: One of the most unique features of this power meter is that it supports seven kinds of calibration wavelength: ( 850nm, 980nm, 1300nm, 1490nm, 1500nm, 1500nm,1625nm), allowing you to cyclically switch between multiple Wavelengths.
• Inbuilt LED Flashlight : You can continue test even in dark surroundings with the help of a mini torch present at the front of the meter.
• HD Display : This fiber optic tester has an LCD color screen that lets you read the reading clear in dark surroundings.
• USB Charging : With an inbuilt charging port you can charge your device anytime and anywhere. (Note: The products come with 1 year warranty. To claim warranty contact us via call or whatsapp, number available below in 'Product Information' section)

• Range: 25-50 Mm
• Graduation: 0.01mm
• Accuracy: 2m

• Tempered steel blade. Rust protected.
• Sturdy rewind handle. Long winder with easy grip knob facilitates quick rewinding.
• Protruding marker at bottom of the case allows easy measurement of land.
• Professional quality with 13 mm tape width.
• Ring end fitted with folding claw for easy single end use. Impact resistant plastic case.

• The Robo Electrixx Soil Hygrometer module is convenient to sense the moisture level of the soil and determine whether the plants have been overwatered or underwatered. It has 2 probes which act as variable resistors. The two probes allow the current to pass through the soil and then it gets the resistance value to measure the moisture value.
• A fixed bolt hole for easy installation | With power indicator (red) and digital switching output indicator (green) | Having LM393 comparator chip | Stable | Dual output mode.
• Dimensions: Panel PCB:Approx. 3x1.5cm | Soil Probe: Approx. 6xcm | Cable Length: Approx. 21cm.
• Soil hygrometer humidity detection module is used to detect moisture in the soil. It is sensitive to ambient humidity. The output level of the module is high when the soil is dry, else the output is low. The sensor can be used to make automatic watering systems.
• Operating voltage: 3.3V~5V | With power indicator (red) and digital switching output indicator (green) | FC-28 with LM293 || Interface Description (4-wire): VCC:3.3 V-5V | GND:GND | DO: Digital output interface (0 and 1) | AO: Analog Output Interface.

• 1. With LCD LCD display frequency and duty cycle, it is very clear, PWM output can set frequency and duty cycle separately; 2. Wide frequency range and high precision; 3. Serial communication
• PWM output, you can set the frequency and duty cycle separately; The frequency is divided into four ranges and is automatically switched: 1. XXX ( no decimal point ) : The minimum unit is 1Hz , and the value range is 1Hz~999Hz ; 2. The minimum unit of X.XX (the decimal point is in the hundred digits) is 0.01Khz , and the value range is 1.00Khz~9.99Khz ; 3. XX.X ( decimal point is ten ) : The minimum unit is 0.1Khz ; the value range is 10.0KHz~99.9KHz 4. XXX ( decimal point in ten and
• Second, the parameter settings The module has 4 independent buttons for setting the frequency and duty cycle. It supports short press (increase or decrease one unit) and long press (fast increase or decrease). It is very simple. The parameters are automatically saved after setting. Lost. Third, the module parameters: 1. Working voltage: 3.3~30V ; 2. Frequency range: 1Hz~150KHz ; 3. Frequency accuracy: the accuracy in each range is about 2% ; 4. Signal load capacity: the output current can
• application: 1. Used as a square wave signal generator to generate a square wave signal for experimental development; 2. Used to generate a square wave signal that controls the motor driver; 3. Generate adjustable pulses for use by the MCU ; 4. Generate adjustable pulses and control related circuits ( applications such as PWM dimming speed regulation).
• (microcontroller TTL level communication) Communication standard : 9600 bps data bits : 8 stop bits : 1 check digit : none flow control : none 1, set the frequency of the PWM F101 : Set the frequency to 101 HZ (001~999) F1.05 : Set the frequency to 1.05 KHZ (1.00~9.99) F10.5 : Set the frequency to 10.5KHZ (10.0~99.9) F1.0.5 : Set the frequency to 105KHZ (1.0.0~1.5.0) 2, set the duty cycle of the PWM DXXX : Set the duty cycle of PWM to XXX ; (001~100) For

• Terminal Voltage : >85% of Rated Voltage for Insulation
• Resistance Measurement From10% to 100% of the Insulation Resistance Range

• Premium Quality
• Made With Brass
• Handle made of porcelain
• Long lasting

• All alligator clips are made of high-quality metal materials, with good electrical conductivity
• Color: Black & Red
• Commonly used as miniature clamps to hold parts together for gluing and wires together for soldering
• the insulating sleeve makes the operation safer and more convenient. It is the best tool for you to do electrical testing
• Wide Range of Use: Suitable for home, automotive use, perfect used for a DIY soldering helping hands device, household soldering tool and electrical testing tool.

• 1/2 digital LCD screen, maximum display value 1999.
• Multimeter features a clear, easy to read LCD display, with white back Light
• Portable & Compact Design.
• Data retention.

• Multipurpose, adjustable design can be used as a saw guide, bevel or protractor
• Yellow body with black graduations provides maximum readability in various light conditions
• Extra thick ABS plastic body holds up to heavy-duty use
• Features Common, Jack and Hip, and Valley scales for various applications
• Dual Colour Quick Square; Molded-in contrasting color graduations for readability
• Limited Life time warranty offered on the product
• The product is manufactured by Stanley Black & Decker with registered trademarks of Stanley, Dewalt & Black+Decker

• Package Quantity: 1 PC OF Measuring Gauge Tool .
• Size 6 inches Marking tool.

• Power Meter : High power range -50~+20 dbm, Wave ID nm: 850,980,1300,1310,1490,1550,1625 User self calibration function, Comfortable LCD display and optional backlight LCD display supports night operation, Power measurements in dBm or mw and insertion loss in dB.
• Visual Fault Locator : output Parameters: Type:10mW Wavelength:650nm ? 20nm Output Power :>10mW Dynamic Distance :<10km Connector:2.5mm Universal connector Application : Telecom, CATV engineering and maintenance - integrated wiring construction and maintenance - The production and research of optical devices - other optical engineering
• Visual Fault Locator : output Parameters: Type:10mW Wavelength:650nm Â? 20nm Output Power :>10mW Dynamic Distance :<10km Connector:2.5mm Universal connector
• Package Content : 1 * Optical Power Meter, 1*Visual Fault Locater ,