Industrial & Scientific Store - Test, Measure & Inspect

• Fluke Connect Compatible Leakage Current Clamp Meter - Download the Free Fluke Connect App From iTunes or Google Play to Enable Graphs for Trending
• Large Clamp Meter Jaw - 61 Mm Jaw for Use With Large Cables
• Work Light, Backlight - Forward-facing Work Light, Plus Backlit Display for Use in Dark Wiring Cabinets
• Specialized Current Measurements - 1 a Minimum Resolution, 60 a Maximum Current Measurement. True-rms for Accurate Measurements of Complex Signals
• Selectable Filter Function Removes Unwanted Noise. Max/min/average Readings and Hold Function

• Display : Dot Matrix 98 X 96 Pixels With Function Menus Data Storage : 568 : 99 Points Interface : 568 : Usb 2.0 With Flukeview Forms Software Operating Temperature : 0c to 50c (32f to 122f)
• Hi/low Alarms : Audible and Two-color Visual Display Resolution : 0.1c / 0.1f Battery Life : if Used Continuously: Laser and Backlight on,12 Hours
• Laser and Backlight Off, 100 Hours Storage Temperature : -20c to 60c (-40f to 140f)
• Laser Sighting : Single-point Laser 1 Mw Output Class 2 (Ii) Operation, 630 Nm to 670 Nm Minimum Spot Size 19 Mm (0.75 in) Emissivity Adjustment : by Built-in Table of Common Materials or Digitally a
• 0c (32f): 1 % or 1.0c ( 2.0f), Whichever is Greater

• Leakage can be identified effectively and accurately with display of PPM data.
• Leakage can be pinpointed with ease even in the most complicated refrigeration oil and gas system ,also for the complicated systems with high accuracy requirements.
• Data can be viewed and analysed in real-time via our App to determine result of maintenance.
• Meet most standards for automotive AC leakage detection as well as the refrigeration industry.
• Upgrade can be downloaded via OTA for the life time of the product.

• OVER 49,000 PIXELS: Thermal imaging camera with high resolution images for troubleshooting hot and cold spots with over 49,000 pixels
• WI-FI CAPABILITY: Easily capture, store, and share thermal images with Klein Tools free App available in Google Play Store and the App Store
• USER SELECTABLE TEMP: Chose high and low temperature alarms from -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius)
• RECHARGEABLE: Imager comes with a micro-USB charging cable and a soft-molded storage pouch with carabiner clip
• THREE COLOR PALETTES: Chose from ironbow, rainbow, or grayscale to best capture the thermal event
• ADJUSTABLE EMISSIVITY: Levels can be adjusted from 0.01 to 0.99 to enable accurate measurements for most materials
• DURABLE: Thermal Imager is built to withstand a 6.6-Foot (2 m) drop

• HIGH RESOLUTION IMAGES - 76,800 pixel images with a 3.2 full color TFT screen displaying crisp and clear thermal images in thermal or visible light view.
• EXTENDED WARRANTY - 24 months standard warranty, with additional 12 months warranty after product registration to ensure peace of mind.
• ACCURATE AND PRECISE - +/- 2.5 % or +/- 2.5 degree C including emissivity and reflected temperature values to ensure your readings are accurate no matter the application.
• 4 GB SD CARD - Integrated SD card with a massive 4 GB memory which easily transfers files over via the provided USB cable in JPG format.
• ERGONOMIC AND COMFORTABLE - The design and weight of the camera enables the user to comfortably hold and use the camera for extended period of time. Large buttons for ease of use even with gloves on.

• Multimedia Support: Tests all common media types including RJ11, RJ45, Coax, with no need for adapters
• IntelliTone Toning: Locates virtually any cable or wire pair with IntelliTone digital and analog toning
• VDV Service Detection: Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE
• Oversized Display: Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet

• Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. ( 20 C).
• All gage block sets are assigned serial numbers and are accompanied with a certificate of inspection listing the deviation for each block
• DIN861 Grade 2 = +/- 0.000050\"
• Surface Hardness: HRC 64
• All gage block sets are made to special standard to resist corrosion and defacement

• Megger MIT210 EN Insulation Tester, 1000 Megaohms Resistance, 1000V Test Voltage
• Item Package Quantity: 1
• Number of Items: 1

• LCD Display

• Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations
• Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
• Dual digital display with analog arc function to replicate response of analog meters
• Measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms
• Safety rated to European Standard EN61010-1 Category III, 600V and IP40 rated for protection against accidental contact with hazardous parts

• The new Fluke pocket Thermal Imager puts the power to minimize downtime in everyone's hands. The first line of defense for easy troubleshooting. Stop fighting fires on the job, start preventing them. Now enhanced infrared inspections are right in your pocket for quick temperature scans of electrical equipment, machinery and other assets.
• With Fluke Connect asset tagging you eliminate the tedium of sorting and organizing your infrared images by simply scanning your asset's QR code or bar code, your infrared image and all of your date and time stamped information will be stored to your predefined folder
• Small enough to carry every day without worry, always at hand, stands up to dirt and water, and can survive a 1-meter drop
• The 3.5 LCD touchscreen offers IR-fusion to blend a visible light image with an infrared image to more easily locate problems, simply slide your finger across the screen to adjust the setting

• Low influence of external low frequency magnetic fields: @ IN: 3. 500 mA 600. 0 mA 30 A/m, operating class 2
• True-rams measurements for accuracy when measuring complex, non-sinusoidal waveforms
• Mechanical jaw lock to assure accuracy of low current measurements, avoiding disturbance from measured wires and magnetic fields; jaw opening 1. 2 in (30 mm)
• Selectable filters: low pass 50/60Hz filter to perform measurements on equipment driven by variable frequency drives (VFDs) or affected by high frequency noise, appliance filter to conduct leakage current measurements on appliances and no filter

• Kit includes: 12 grabbers (2 of each color) in black (model 72902-0), red (model 72902-2), yellow, green, blue and white
• 6 black holding rods to reinforce connection positions during side-by-side measurements, model 72903
• 12 black micro leads with 0.8mm female / 0.8mm male connectors
• Country of origin: France

• ACCURATE TESTING: Measures dissolved oxygen (0?20 mg/L) and oxygen percentage in air (0?100%) with high precision. Ideal for environmental testing, labs, aquariums, fish hatcheries, and wastewater management.
• WATERPROOF: Built to withstand tough conditions with IP65-rated waterproofing, ensuring reliability in wet environments like aquariums or fieldwork.
• ADVANCED FEATURES: Polarographic probe with a built-in temperature sensor offers automatic temperature compensation (32?122?F / 0?50 degree C) for consistent accuracy in every reading.
• EASY TO USE: Compact and portable with one-hand use, it features a clear display for simultaneous dissolved oxygen and temperature readings, plus data hold, max, and min memory recall.
• COMPLETE SET: Comes complete with 2 spare probe heads, electrolyte solution, 4 AAA batteries, and a soft carrying case with a belt loo - perfect for professionals on the go.

• Dual Infrared and Thermocouple Thermometer for Noncontact or Contact Temperature Measurement in Electrical Maintenance and Monitoring Industrial and Manufacturing Processes
• Measures Temperature With the Infrared Sensor From -40 to +800 Degrees C (-40 to +1472 Degrees F) With an Accuracy of + or - 1 Degree C (+ or - 2 Degrees F)
• Measures Temperature With the Included Type K Bead Thermocouple From -40 to +260 Degrees C (-40 to +500 Degrees F)
• 50:1 Infrared Distance-to-spot Ratio With Laser Sighting for Pinpointing the Measurement Area
• Package Included

• Brand Name: Fluke
• Item Type: Fluke 289 True-rms Industrial Logging Multimeter With Trend Capture
• Package Content: 1 Fluke 289 True-rms Industrial Logging Multimeter With Trend Capture