Industrial & Scientific Store - Test, Measure & Inspect

• Ultra-Precise Measurement: Elevate your precision tasks with our high-accuracy 3000g x 0.01g lab scale, ideal for scientific, pharmaceutical, and jewelry weighing needs
• State-of-the-Art Load Cell: Our upgraded digital scale features an advanced load cell for error-free readings, ensuring dependable results for critical measurements in labs and industrial environments
• Rigorously Calibrated: Subjected to extensive testing, each scale is calibrated and inspected to maintain a linearity error within ?0.03g, providing you with confidence in every measurement
• Robust Construction & Calibration: Built with premium materials for longevity, every scale is rigorously tested and calibrated to ensure a linearity error below ?0.03g, adhering to stringent laboratory standards
• Advanced Calibration Process: The calibration function can auto-detect any calibration weight in multiples of 100g, i.e., 200g, 500g, 1000g, etc., as long as the weight does not exceed the maximum capacity of the electronic balance; For scales with a maximum capacity of 2000g or greater, use a calibration weight of at least 500g; The closer the calibration weight is to the maximum capacity of the scientific scale, the greater the accuracy of the weighing

• DIGITAL MODE: Easily trace and locate cables on an active network to identify their paths and destinations effectively
• ANALOG MODE: Isolate individual wire pairs, facilitating the tracing of voice, data, video, and audio cables
• CONTINUITY AND POLARITY TESTING: Results for continuity and polarity tests are displayed on LEDs that are clearly labeled and easy to read
• TRACE UNSTRIPPED WIRES: Rugged Angled Bed of Nails (ABN) clips securely attach to wires
• WIRE MAPPING CAPABILITIES: Utilize wire mapping capabilities to verify Pin-to-Pin connections and shield detection
• 60Hz FILTER: Incorporates a 60Hz filter to ensure accurate tracing
• RJ45 PORT: Easily test RJ45, RJ11, and RJ12 data cables

• Application:Handheld digital WT10A gauss meter used to measure the magnetic field of the permanent magnet material surface, DC motors, speakers, magnetic separator, permanent magnetic separator magnetic field demagnetization and the leakage of the magnetic field, parts machining residual magnetic field.
• With small size, light weight and convenient carry, this instrument can meet the measurement requirements of various sites. Can be used to measure DC magnetic field and flux density.
• It has wide measuring range, simple operation and clear display.
• Can be used to measure DC magnetic field and flux density.
• Has the function of holding Measure Value/Peak Value, mT or Gs unit of display can be change over. Measuring range of 200mT or 2000mT, and others that as resetting zero by key and so on.

• Microscope camera has wide range of applications. Widely used in the fields of microelectronics, , accuracy machinery, jewelry, watches, accessories, fingerprint identification, ticket identification
• Microscope camera is widely used in printing, mobile phone repair, archaeology, biological anatomy, school teaching, etc. Support sharpness contrast color gain and mono negative film
• The material is excellent, it is a high?definition high'speed camera, which greatly improves the operating efficiency. There are 51 million pixel CMOS sensor, take pictures very clearly
• HDMI image resolution up to 51 MegaPixel, HD and high speed. With WB color correction automatic and manual device.
• Suitable for observing the microstructure of large objects. Provides convenience for precise measurement and correction of objects

• Voltage: Dc: 600 Volts
• Ac Accuracy: 1.5% + 5 Digit

• Designed to following safety standards: IEC 61010-1 (CAT IV 600V Pollution degree 2) IEC 61010-031 (Requirements for hand-held probes). Insulation test range: 0.1M to 60G?. Insulation test voltages: 500 V,1000V,1500V,5000V.
• AC/DC voltage: 0.5 V to 600 V. 200 mA Continuity. Resistance: 0.1 to 6k?. Battery Cum Mains Operated. With auto-discharge function & voltage output warning function.
• Backlight levels selector function to facilitate working at dimly illuminated location or at nighttime work. LIVE circuit warning symbols plus audible warning. Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection.
• With Auto-power off function & battery check. With Timer measurement function : Automatically performs a measurement at the set time. With Polarization index measurement (PI) With Dielectric absorption ratio measurement (DAR).
• Auto ranging with larger 6000 counts LCD display with bargraph. MAX/MIN, PEAK,Relative value & Data hold functions for DC/AC voltage measurments. Accuracy: +2.5%.

• Range:50 - 100mm
• Graduation: 0.01mm
• Micrometer Head Stroke: 13mm
• Extension Rods Qty: 6, Size: 13, 25, 50(2 pcs), 100, 200(2 pcs) 300mm
• Main Unit: 50-63mm

• Micrometer Head Stroke: 13mm
• Extension Rods Qty: 6, Size: 13, 25, 50(2 pcs), 100, 200mm
• Main Unit: 50-63mm

• Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, , pure and low distortion .
• 2.4 inch TFT Color LCD with 320x240 resolution, displaying parameters and graphics of the two channels at the same time.
• The instrument uses 14-bit high-sp eed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
• Various modulation types to choose, AM, FM, PM, ASK, FSK and PSK modulations.
• Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bits.-10V~+10V DC Offset function. Resolution 0.01V.

• Job Link Dual Manometer Kit (Case+2xJL3MN)
• Reliable Pressure Regardless of Location
• Measure Real-time Pressure Drops
• Find Inlet and Outlet Gas Pressures
• Switchable P1 - P2 Indicator

• Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces
• Durable ribbon sensor
• Measurement range: -29 to 149 Degree Celsius
• For pipe diameters: 6.4 mm to 34.9 mm (.25 to 1.375-Inch
• packed included 1pc

• This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).
• This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in \"AUTO-LCR \" smart mode without selecting the function key.
• Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically. User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
• The \"Sorting\"mode could help the user to make a quick sort for a bunch of components.
• Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.