Industrial & Scientific Store - Test, Measure & Inspect

• 104Pcs Multimeter Test Leads Kit The test lead kit can be used quickly for adjustment and helps the technician accurately check car problems.Not only for automotive diagnostics, testing and repair, but also in physics labs, workshops, schools, homes and industries. It is an important tool for mechanics to troubleshoot the increasing number of sensors, actuators, electronic circuits and automotive electrical appliances on vehicles.
• SRS Connector &2 LED strobe The provided SRS connector can simulate the airbag and routed contraction device of the seat belt to avoid accidents or misjudgment.LED strobecan be used to monitor Hall effect, photoelectric signals, nozzles, transmission gear electromagnetic valve and control signals.
• Wide Application Automotive multiwire set is suitable for any electric meter, extension of oscilloscope probe, for most vehicles in Europe, the United States and Japan. For tracking, checking, measuring or correcting complex vehicle circuits. When measuring the current, the wire does not need to be cut or removed, but can be connected to a series of circuits.
• Easy to use Standard 4mm banana plug, the rear probes can be easily plugged into automotive connectors and used on wiring harness connectors, fuel injectors and automotive sensorsto avoid replacement of unnecessary new parts. but also can be very good with the use of multimeter and oscilloscope and other measuring tools. The use of junction boxes can save manpower and time, great for minimizing damage to connectors and sensors!
• What You Can Get Terminals x72 (48 flat terminals and 24 round terminals);SRS Connector x2;1-to-2 Connector x2;Alligator Clip x2;LED Stroboscope x2;Standard Probe x2;Acicular Probe x4;Potentiometer (5KOhm) x2;1-to-1 Connector x4; Piercing Probe x2; Straight Back Probe x5 ; 45 Back Probe x5; Black carrying case.

• 200psi dual needle gauge
• 2 manual paddle valves
• Simple installation
• Black finish on switch panel
• Includes detailed instructions

• degree C / K Selectable.
• Back-light LCD display.
• Laser targeting / Data memory and read function.
• Maximum / Minimum function.
• Data memory and read function.

• High-Luminance LED Stroboscope Meter:The DT-50D RPM Stroboscope Meter offers a high-brightness stroboscopic effect of 750Lux, enabling precise speed measurement from 60 to 49,999 RPM with an exceptional accuracy of 0.001%. With its higher brightness, the DT-50D ensures clearer and more accurate imaging during the measurement process, facilitating the observation and analysis of high-speed movements or vibrations
• No reflective tape required:This LED Stroboscope is used to measure high-speed rotating objects such as motors, fans, pumps and gears. It does not require any reflective tape and can accurately test high-speed objects by simply aiming at the rotating object and easily adjusting the strobe light frequency. This is especially useful for identifying anomalies, imbalances or irregularities in motion and can be used to troubleshoot motor/fan/HVAC/automotive engines
• Adjustable Strobe Tachometer:This Tachometer is equipped with a 360 rotating dial for fast and accurate adjustment of the strobe output by rotating the multiplier to the left or right in an unlimited manner, with x1, x10, x100, multipliers,...
• Digital Handheld Stroboscope:The dimensions of this handheld stroboscope are: 3.54*8.26*2.27 inches, weight 320g, suitable for the measurement of motors, fans, pumps and gears
• Non Contact Strobe Tachometer:AP-DT50D tachometer is widely used in high-speed rotating objects, such as HVAC Motor Printing Spinning; USB charging method, can work continuously for 8 hours and standby time is 3 months

• Extensive Measuring Instrument: RQ-DT-50D can measure high-speed rotating equipment or moving objects without contact.Using LED as the light source, the strobe frequency is more stable and accurate. It can be used for air conditioning, printing, papermaking, textile, medicine, equipment processing.
• 60-49999RPM Digital Handheld Stroboscope Measurement range?60-49999RPM, Illuminance:750LUX.You can adjust the stroboscopic rate according to the measurement requirements, and the value can be increased or decreased. LCD display reads more clearly.
• High Accuracy RQ-DT-50D have 0.001% high accuracy which is ahead of similar products.USB charging method, battery life up to 8 hours, standby time up to 3 months. It can be used to measure multiples, multiples, and power.
• Reflective Tape Not Essential LED stroboscope is suitable for more conditions, for it can measure rotating speed even without reflective tape, just mark or identify existing marks of the equipment under measured, unsymmetrical marks are preferred. Perfectly solve problem that reflective tape hard to stick on high rotating systems.
• What You Will Get RQ-DT-50D Digital Handheld Stroboscope*1,USB charging cable*1,Color box*1 WapoRich provides 12 months product warranty and life-time tech support, If you have any problem,please feel free to contact us.

• 4 in 1 Multi-function Tool LAN cable tester, OPM, VFL and NCV combined on ONE tool. No more calls,no more costs, find and fix it by yourself.
• Accurate CAT5 CAT6 Cable Tester NF-8508 network tester is a multifuctional tool which can do POE test, length measurement, wire locator and tests the faults of LAN network.
• 7 Wavelengths Optical Power Meter Can measure 7 standard wavelengths,850/1300/1310/1490/1550/1625/1650, power detecting range(dBm): -70 ~ +10.
• Visual Fault Locator Emmiting Energy: 10mW, standard wavelenth: 650nm. Fast flashing, slow flashing, high precison.
• Must Tool for Home Using Non-contact voltage detecting, LED light and 1500mAh rechargeable lithium battery help you get the job done in a variety of environments.

• [3 Axis LCD Readout] This kind of DRO is commonly fitted to machines, especially for metal working lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools to allow the operator to work faster and with greater accuracy.
• [Accuracy] Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um; Min resolution of digital display angle :0.0001/pulse, Linear Scale Interface: DB9(TTL).
• [Multifunction] The digital readout display meter system is equipped with a variety of intelligent functions: SDM 200 sets memory, power-off memory, circumference drilling, oblique line drilling, 1/2 centering, etc. Also a calculator is equipped for more convenient usage.
• [Professional Design] Signal line is protected by multi-layer isolating wire and metal soft shell. Display screen have a good capacity of resisting disturbance, durable keyboard, easy to change.
• [Application] Fits for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement, mechanical control as well as other area of linear scale and rotary encoder.

• Model: AI-IAQ6-PH | Measuring Parameters: PM2.5, PM10, Temperature, Humidity, CO2, VOC | PM2.5 Range: 0 to 1000 ?g/m3; Accuracy: ?15 ?g/m3 (when concentration is 100?g/m3), ?15% (when concentration is > 100?g/m3) |
• PM10 Range: 0 to 1000 ?g/m3; Accuracy: ?15 ?g/m3 (when concentration is 100?g/m3), ?15% (when concentration is > 100?g/m3) | Temperature Range: 0 to 50 degree C; Accuracy: ?0.5?(0-65?) | Humidity Range: 0 to 100%RH; Accuracy: ?3%RH |
• PM10 Range: 0 to 1000 ?g/m3; Accuracy: ?15 ?g/m3 (when concentration is 100?g/m3), ?15% (when concentration is > 100?g/m3) | Temperature Range: 0 to 50 degree C; Accuracy: ?0.5?(0-65?) | Humidity Range: 0 to 100%RH; Accuracy: ?3%RH |
• Communication: RS 485 Modbus Protocol Communication | Enclosure: Panel /Wall mounting ABS Plastic Body | Power Supply: 12 VDC adaptor provided along with for direct plug into 230VAC/110 VAC | Dimensions: 120(W) x80(H) x 55(D)mm.
• Supply Scope: 1 Unit of Ace AI-IAQ6-PH Air Quality Monitor, Instruction Manual | Applications: Hospitals and medical facilities, Hotels and Restaurants, Schools and Colleges, Shopping Malls, Offices Buildings, Industrial Buildings, etc.

• High Accurate and Quick Response: This Force Gauge is designed with built-in high sensitivity sensor, fast measurement speed and high precision
• Longer Working Time: This Push Pull Gauge is equipped with 3.7V lithium battery, and the theoretical working time can reach 15 hours
• Multiple Protective Functions Offers Safety The battery has short circuit, leakage, overload , and effectively the safety of the product
• Low Battery Reminder Helps Data Record: This Digital Force Gauge Push and Pull Tester is featured with a low battery reminder, no within 10 minutes can automatically shut down, do not worry about sudden power
• Simple to Operate: Support three different units display: Lb, Kg, N, one-button switching, easy to operate

• Outside micrometer with 60-degree point measures hard-to-reach areas including thread accuracy in screw-cutting operations, small flutes, recesses, grooved trolley wires, and keyways
• Digit display has 0.001\" graduation intervals and Vernier scale has 0.0001\" graduation intervals and an overall accuracy of 0.00016\" for precise readings
• Conical anvil and spindle have a hardened and precision-ground micro-lapped finish with a 0.012\" radius curvature at the extremity and a 0.21\" length
• Hardened, ground and lapped spindle thread provides smooth movement, accuracy, and long life
• Ratchet stop applies constant force for repeatability between users

• LM407 Pro with Upgraded 13 inch Mini Arm Boom Stand Equipped with upgraded 3D 13 inch boom stand (size: 7*7.8*13inch), LM407 Pro digital microscope has 10cm arm and 32cm pillar, allowing point soldering microscope head in any direction desired.
• Large Working Space Professional HDMI soldering microscope LM407 Pro with higher boom stand and larger metal base plate which has longer working distance to enable users to repair large items, such as PC circuit boards. Sturdy and weighted metal stand of HDMI microscope can minimize shaking and increase durability
• Industrial-grade Lens, UV Filter LM407 Pro HDMI digital microscope uses professional industrial-grade microscope lens, metal focusing barrel, super high temperature resistance; microscope lens is equipped with UV filters, not only filters out stray light, smoke and oil stain, but also easy to clean
• Professional Electronic Repair Assistant LM407 Pro soldering microscope embraces 7 inch LCD screen, 207X magnification, 4 MP image sensor with great depth of field, adjustable digital microscope monitor to reduces eye and neck strain, and 90-degree rotation to enable sharing
• HDMI Output With HDMI interface, When LM407 Pro video microscope connected to an external monitor, plug and play, allowing you to get a larger field of view for sharing and discussion
• Photo, Video, Playback Use LM407 Pro video digital microscope to capture whole coins(up to 4032x3024 12M) and recording soldering PCB process(up to UHD2880x2160 24FPS) ,video recording without delay
• Sides LED, Remote Control Metal hose LED lights on both sides of digital microscope are adjustable by press the dimmer switch or Remote Control which also has the functions of taking photos, videos, zooming in, zooming out, etc
• What You Get LM407 Pro HDMI Microscope, 13 inch Mini Arm Boom Stand, UV filter (assembled), Remote control, Power plug, Wrench, Metal clips, Switch cable, HDMI cable, User manual

• 1.Part number:SP0710X62
• 2.1-1/2\" Plumbing fittings
• 3.Compatible with Hayward S210S, S244S, & S310S series sand filters
• 4.Notice:Don't include Gauge,Please confirm the product model and Compatible models before to buy

• High Brightness Stroboscope Compared with ordinary Xenon strobe Light, the YF-DT-100B strobe tachometer is upgraded with 9 beads LED Light Source, high brightness up to 1500Lux, with more stable performance, longer use life, and farther light range.
• High Accuracy Speedometer Adopted with the updated frequency sensor, the digital speed analyzer can range from 60-99999 RPM with 0.001% high accuracy. Weighed only 320g, the handheld velocimeter is easy to carry. Size: 210*90*57mm
• Easy to Use By rotating 360 dial, the non-contact speedometer revolution meter makes it easy to increase or decrease the speed reading for the spinning motors, fans, pumps, gears, etc. When the fast rotating speed objects seem to slow the value on the LED Stroboscope is the real-time rotating speed.
• Large Battery Capacity Equipped with a 2200mAh Lithium battery, the stroboscopic tachometer supports USB charging, able to continuously work for 8 hours or standby for 3 months after full charge. HD LCD backlight makes value reading at a glance.
• Guarantee Purchase The digital tachometer is also a debugging weapon for air conditioning, printing, spinning, pharmaceutical, and other machines with no need to stop the machine. INFURIDER provides a 365-day guarantee, feel free to contact us if there are any concerns.

• This type Clamp-on Transducer is suitable for Ultrasonic Flowmeter/Ultrasonic Heat Meter like type of TUF-2000SW/ TUF-2000B/ TUF-2000F/ TUF-2000M
• High Temperature Clamp-on Transducer TS-2-HT Standard small Clip(size: 45*25*28mm)
• Standard small Transducer for Pipe Diameter DN25~100mm,Temperature : -30~160 degree C
• The package included 1 pair Transducer TS-2-HT, Please check whether this sensor matches your product before order

• ALL-IN-ONE RELIABLE AIR QUALITY MONITOR. The most advanced monitor measuring particulate matter (PM2.5 and PM10), formaldehyde (HCHO), humidity, temperature, and AQI. Tested by AQMD, R2 up to 0.999.
• DATA EXPORT: The data export function allows you to track and analyze 7 key indoor air factors, giving you full visibility into your air quality over time. With memory capable of storing at least 3 months of continuous data recording, you can easily access and review historical data for a comprehensive analysis of your indoor environment.
• PRE-CALIBRATED SENSORS. The pre-calibrated Dart electrochemical sensors will accurately capture formaldehyde molecules accompanied by the detection function covering a wide range of organic pollutants.
• INDUSTRIAL-GRADE AND LONG SENSOR LIFE. Temtop advanced industrial-grade laser particle sensor has a lifetime of up to 20,000 hours. Combined with the unique particle swarm optimization algorithm, it makes particle measurement more accurate and stable.
• EASY AND CLEAR. A large TFT screen and rich display make it clear and easy to read, even with a 6-level colorful health level indicator to help you know the air easily at a glance.
• WHAT YOU GET. LKC-1000S 2nd generation dust monitor with built-in large capacity lithium battery, charging cable, user manual, Temtop 12-months warranty & 24/7 customer support access via Email and phone.
• The LKC series does not include CO2 detection functionality. For an integrated air quality monitor with CO2 detection, consider the M2000 series or other options.