Chemical Additives By MG Chemicals

• Up to 12 months shelf life at room temperature. Frozen storage will extend the shelf life.
• Minimum cure temperature of 80 degree C [176 degree F]
• Ready to dispense?no mixing is required
• Broad service temperature -65 to 150 degree C [-85 to 302 degree F]
• Extremely high tensile and compressive strength

• One-part adhesive?no mixing required
• Cure Time: 30 min @ 100 degree c [212 degree f]
• Excellent adhesion to common electronic substrates and components
• Unlimited working time at room temperature
• Tag of 113 degree c [235 degree f]

• Non Toxic

• Excellent 1. 44 W/(make) thermal conductivity
• Easy 1: 1 mix ratio with 4 hour pot life
• Adheres to most electronic substrates
• Stores and ships at room temperature - no freezing or dry ice required. Very long shelf life of at least two years - even when stored at room temperature
• Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

• Excellent 1.36 W/(mK) thermal conductivity
• Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
• dheres to most electronic substrates

• This cyanoacrylate adhesive has been formulated to quickly bond plastics, metal, and ceramics
• It offers excellent strength characteristics
• Clear transparent liquid
• packed included 1pc
• Warranty not applicable for this product

• Excellent 1. 36 W/(make) thermal conductivity
• Easy 1: 1 mix ratio with 45 min pot life
• Adheres to most electronic substrates
• Stores and ships at room temperature - no freezing or dry ice required. Very long shelf life of at least two years - even when stored at room temperature
• Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons

• Resistivity of 0. 0040 Ohm?cm
• Durable coating, abrasion and oxidation resistant
• Provides effective EMI/RFI shielding over a broad frequency range
• Quick dry time, No heat cure required, easy to apply
• Strong adhesion to Acrylic, ABS, Polycarbonate, and other injection Molded plastics
• UL Recognized (File# E202609)

• Provides effective EMI/RFI shielding over a broad frequency range
• Resistivity of 0. 0076 Ohm?cm
• Quick dry time, not heat cure required, easy to apply
• Strong adhesion to acrylic, abs, polycarbonate, and other injection molded plastics
• Low VOC; hap free; does not contain toluene, xylene, or MEK
• UL Recognized (File# E202609)

• Heat Resistant

• Low temperature solder paste with non clean flux
• Melting point: 138 degree c [280 degree f]
• The powder distribution complies with the j-std-005 type 3 (with 80 percent min. Between 25-45 ?m) particle sizes
• Store refrigerated between 210 degree c [3550 degree f] to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use
• Rohs compliant

• Heat Resistant