Chemical Additives By MG Chemicals

• Used for locating thermal intermittence, locate pcb cracks, and cool solder joints
• Chills down to -50 degree c (-60 degree f)
• Contains: 100 percent hfo-1234ze refrigerant
• Non-flammable, non-conductive, zero residue
• Ozone safe, voc free, very low global warming potential

• Certified UL 94 V-0 (File# E203094)
• Maximum constant service temperature of 200 degree C [392 degree F]
• Fluoresces under UV-A light (blacklight)
• Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK
• Excellent corrosion resistance?tested in salt spray environment with no oxidation or coating damage
• Easy rework and repairs: Solder through the coating or remove with MG Cat. No. 8309 Liquid or 8310A Gel stripper formulations

• High Conductivity?Low Surface resistivity of 0.21 ?/sq for one coat (1.0 ml)
• Tough and durable coating, Rub off resistant, Corrosion resistant coating
• Stronger adhesion than water based coatings
• Median attenuation 60 dB ?18 dB per 25.4 ?m (~1.0 mL)
• Low VOCs for frequency range of 10 MHz to 18 GHz

• 17 oz Bottle

• Lead free & no clean
• Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
• Flux meets J-STD-004B
• The resin spreads like rosin-activated flux
• About 14% longer by weight than leaded solder wires

• Lead free & rosin activated flux
• Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
• Flux meets J-STD-004B
• Fast wetting
• Fast flowing

• Colour: White
• Pack Size: 340 g; Composition: Tetrafluoroethane, Acetone, Toluene, Propylene Glycol Monomethyl Ether Acetate, Alpha-Isomer, Ethanol, Carbon Black, Isobutyl Acetate, Amyl Methyl Ketone, Ethyl Acetate
• Specialty: 1) High Conductivity?Low Surface resistivity of 250 ?/sq for one coat (1 mil) 2) Tough and durable coating 3) Carbon does not rub off 4) Stronger adhesion than water based coatings 5) Low VOCs
• Care Instructions: Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 degree C/122 degree F. Store in a well-ventilated place. Keep container tightly closed.

• Conductive Pen
• Chemicals Nickel
• It ensures matchless performance

• Pack Size: 25 ml
• Speciality: 1) Cure time: 24 hours at room temperature or 15 minutes at 65 Degree Celsius. 2) Good adhesive strength
• 1) Strong resistance to water, brine, acids, bases, and aliphatic hydrocarbons 2) Shelf life greater than two years

• Eutectic alloy (liquidus = solidus temperature)
• Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
• Flux meets J-STD-004B
• Spreads like rosin-activated flux
• Halide free

• Lead free & no clean
• Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
• Flux meets J-STD-004B
• About 14% longer by weight than leaded solder wires
• NSF - Nonfood Compounds Program Listed P1, NSF Registration #144209