Electricals Store - Radio Wall Transmitters

• Remote Switching : Radio frequency Switch for turning on / off electrical circuits from a distance of 0 - 5000m
• Latching Type Relay for better life . Seperate antenna with 3m wire allows for better reception of remote signal to turn on/off of electrical circuits
• 2 channel Remote: You can pair the remote to two receivers and control each reciever independent of reach other
• Range : This switch can receive signal from the remote upto a range of 0 - 3000 meter approximately in an open field environment and 500 - 1500 meter in a walled environment. remote control signal range is interfered by mountain, electric field, magnetic field, houses, trees and other factors, the actual distance may be different. The specific distance depends on the actual environment.
• Reciever : Works on 220v Ac 50/60 Hz and has a max load capacity of 80A lighitng Load (15 kw) and motor load (10kw). it is easy to wire.
• Built In Transformer : Receiver has build in transformer to protect the device against voltage surge .
• Ideal Use case : Irrignation systems automation , Home automation, door automation, industrial automation, outdoor lighting automation, remote motor control, motor starter pannel remote switching, water tank systems automation etc..
• Pack Contians : 1 remote with 9v Battery included, 1 antenna and 1 receiver packed in a corrugated box outer carton, color of remote (White), receiver (Light Grey) and antenna (black)

• Great DesignRF 433MHz wireless remote control switch. Stable and reliable performance with high reception sensitivity (>97dbm). Radio frequency signal transmission. A strong signal can pass walls, floors, doors, panels, etc. It can be controlled within 50m distance in an open area. The chip code is EV1527 learning code which is the most popular technology that makes the remote control system safer.
• Easy to UseExtremely easy to set up and reset. There are 3 operating modes (momentary/toggle mode/lock) that can be configured. You can easily configure yourself according to your requests. The operating mode of the product is adjustable. This item has already been configured in toggle mode. It can also be configured in mix mode. Like 2 channels in momentary mode and 2 channels in toggle mode.
• More FlexibilityThis receiver contains 4 relays, and there are 3 terminals (normally open, common, normally closed) for each relay. These 4 relays are independent, so you can remotely control each of them independently. Each receiver can store about 20 transmitters. And one transmitter can control multiple receivers. For example, you can use two relays to control the door/engine of the garage and the other two to control the lights.
• Quality AssuranceHigh quality relay can be used more than 100,000 times. Let this product last longer and be more stable to use. The high power blue terminal can withstand a current of 10A, so that this product can have a good effect even when the current is unstable. The receiver is suitable for 85V~240V voltage, it is more flexible to use.
• Wide Application Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely operate each device connected to the relay receiver via the remote control. Such as truck trunk, garage door, electric door, shutter door, extension door and electric curtain, fan, lamp, lighting, ventilation device, signal transmission, etc.

• Flexible wall-mount remote control with two channels for central control of Homematic IP devices
• At the touch of a button, e.g. the eco mode for all radiators or the panic alarm can be activated
• Can be flexibly mounted with supplied adhesive strips or screws
• Easy to integrate into existing switches from the following manufacturers:
• Berker (S.1, B.1, B.3, B.7 Glass), GIRA (System 55, Standard 55, E2, E22, Event, Esprit),

• 4?button functions.
• 1?eyelet for key ring.
• SW-Europa.
• Chrome-plated caps.
• 4?channels for any 4?gate operators.