Electricals Store - Wall Plates

• Accent any wall covering with a wide selection of colors and finishes
• Limited ten-year warranty
• Smooth face and rounded edges resist dust accumulation
• Molded thermoplastic for maximum resistance to impact, abrasion, fading and discoloration
• Resistant to mechanical stress associated with high abuse applications

• Made of polycarbonate thermoplastic material to provide durability, flexibility, and resilience to withstand hard impacts and heavy force
• Heat & fade resistant to temperatures over 100 degrees which protects them against discoloration and fading over time. Flammability UL94, V2 rating
• Easy replacement of any wall plate of the same size. Outer dimensions are: Height: 4.68\" x Length: 4.73 inches. Inner dimensions are: Height: 2.65 x Length: 1.36 inches (Each Opening)
• Smooth finish without recessed lines and soft edges allow for easy cleaning
• Screwless cover for added child safety, 1-year Warranty, UL listed

• Made of polycarbonate thermoplastic material to provide durability, flexibility, and resilience to withstand hard impacts and heavy force
• Heat & fade resistant to temperatures over 100 degrees which protects them against discoloration and fading over time. Flammability UL94, V2 rating
• Easy replacement of any wall plate of the same configuration. Dimensions: 4.88\" height x 4.92\" length
• Smooth finish without recessed lines and soft edges allows for easy cleaning
• Includes screws to match the wall plate; 1-Year Warranty, UL-listed

• Modern design enhances the look and feel of your house. Smooth and glossy finish makes it easy to clean. Invisible screw design for child safety
• Unbreakable polycarbonate thermoplastic material provides perfect impact, heat and fading resistant performance
• Easy to install. Simply screw the inner plate on the outlet/switch and snap on the outer plate cover
• Slightly larger size than the standard decorator wall plate. Height 4. 69 (11.91cm) x Width 2.91 (7.39cm) x Depth 0.28 (0.71cm)
• USWP6 series for snow white color and USWP4 series for white color. To best match with your outlets/switches, please select the right series (1-6 gang)

• [Compact Brush Cable Pass Through Wall Plate] The cable opening dimension of the White Brush Wall Plate is 3.3?*2.24?, which is large enough for concealing low voltage cables including HDMI, coaxial, Aux, speaker wires, networking cable and so on.
• [Built-in Low Voltage Bracket Mounting] The Mounting Bracket is integrated with the back of the Brush Wall Plates, simple locked and tightened against the drywall.
• [2-Gang Wall Plate, 2 Pieces Type] Standard 2 gang low voltage wall plate, 2 pieces type with firmly installed brush for dustproof.
• [Cut-out Template Included] A 2 Gang sized cutting template provided for your easy positioning & cutting job, avoid cutting errors while installing.
• [What's in the package] 4pcs 2 gang wall plate, white brush passthrough low voltage cable plate, template card included; Quick assistance available all the time if needed.

• Safety chains can be connected to the plate which is using either the chain hooks or the carabiners.
• The material is solid steel structure, which is thicker and stronger than ordinary materials, which can increase the service life of the product and prevent rust and corrosion.
• Package Includes 1pc Safety Chain Plate with 1pair 1/2in Shackles.
• Should be installed over the tow vehicle's gooseneck ball underneath the base of the Ultimate Connection .
• 100% Brand New , Size : 12.2*10.2*2.4 in . 30 days free return . if you have any question please feel free to contact us .

• LIGHT SWITCH COVERS: Classic way to cover the light switches for shabbat
• FOR SWITCES AND OUTLETS: Magnetic switch & outlet cover
• TWO PATTERN STYLES: Available for modern and toggle switches

• 8-INCH DIAMETER: The \"blank-up\" plate is used to cover the exposed hole left in the ceiling by unused & abandoned 6 or 7-Inch diameter can lights.
• ATTRACTIVE APPEARANCE: The smooth, white powder coated finish blends with white ceiling paint for a pleasing display in any finished space.
• STAY SAFE: The plate covers the entire fixture hole and prevents heat loss and risk of shock if the socket is energized and open.
• ECONOMICALLY EFFICIENT: The tapered, 1/4 outside edge seats firmly against the ceiling surface and prevents heat loss through the fixture opening as well as insect entry.
• EASY-TO-INSTALL: Screw the non conductive threaded hub into the light socket, and connect the spring to the hub eyelet and then stretch and connect it to the cover plate bracket.

• Provides convenient power access on raised wood or composite decks and porches
• Low profile design meets ADA standards, includes beveled edge and slip-resistant texture
• Heavy duty UV-resistant polycarbonate for durability even in harsh environments
• Cord hooks hold two power cords in place, including most 16 gauge grounded extension cords
• Fits standard duplex, decorator and GFCI receptacles

• ORGANIZE CABLES - The perfect solution for concealing up to 4 low voltage audio/video cables behind your wall-mounted flat panel TV (may hold more than 4 cables depending on type)
• THE PERFECT MATCH - These cable plates and brackets have been tested and paired in multiple applications and are a guaranteed fit!
• SAFETY CERTIFIED - Mounting bracket is ETL Listed for Class 2 low voltage cables (not rated for passing AC power chords)
• Can be installed with the opening facing up or down
• Made of durable ABS plastic

• Carriage Bolts are designed to fasten a wooden face to either wood or metal
• Flat head provides a semi-flush finish to applications
• The heads is designed to eliminate the need for a washer
• Square underside of the head is self locking to eliminate the need for a driving tool
• Zinc Finish provides a beautiful, consistent finish

• Solid forged brass for precise detail
• 5-Year warranty
• Available in all Nostalgic Warehouse finishes
• Mounting hardware included for easy installation

• What You Get: you will receive 50 pieces of electrical box cover plates, they are in stylish style and color, and they can make your home modern when you use these covers; The enough quantity can satisfy your decorative needs
• Nice Workmanship: the outlet covers wall plate is made of quality polycarbonate thermoplastic, simple and vintage, which is in nice workmanship, smooth surface provides an attractive appearance and is easy to clean
• Nice Decoration: wall plates for electrical outlets with rounded curved will bring elegance to your space, enhance the taste of your house, can be applied as home decoration and home improvement projects
• Convenience to Install: each of these plug receptacle covers for electrical outlets is equipped with screws, and you need several minutes to install or exchange; You just need a flat screwdriver (not included), then put the screws into the holes of the plate, then you can finish it
• Widely Usage: wall outlet cover is modern in style, not only suitable for home use, but also looks smart in restaurants, hotels, cafes and offices

• Dimensions (in inches): 3.5 H x 5 W
• Made of strong, durable scratch-resistant metal
• Includes matching screws
• High gloss finish
• Easy to clean

• Solid forged brass for precise detail
• 5-Year warranty
• Available in all Nostalgic Warehouse finishes
• Mounting hardware included for easy installation

• Accent any wall covering with a wide selection of colors and finishes
• Limited ten-year warranty
• Smooth face and rounded edges resist dust accumulation
• Molded thermoplastic for maximum resistance to impact, abrasion, fading and discoloration
• Resistant to mechanical stress associated with high abuse applications