Electricals Store - Home Improvement Tools & Testers

• Digital Clamp Meter measures 2000A AC/DC, 1000V AC/DC, 60M?.Clamp measures AC and DC current.
• Rugged Klein ''TOUGH METER'' industrial design stands up to jobsite demands; built to withstand a 6.6-foot (2m) drop.Dedicated mode for capturing Inrush Current.Non-contact voltage tester integrated into the clamp.
• Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.CAT IV 600V, CAT III 1000V, Class 2, double insulation safety rating.Backlit display for clear visibility in environments with low ambient lighting.
• Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability.Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance and diodes.
• Low battery indicator and easily accessible battery compartment.Powers off automatically after 30 minutes of non-use to conserve battery life.Includes carrying case (instruction manual), straight input test leads, and 2 x AAA batteries.

• Detecting cables, electrical lines, water/gas supply pipelines buried in wall or underground, fuses and assigning current circuits;
• Detecting interruptions and short-circuits in cable and wire in wall or underground;
• The transmitter has the function of self-inspection to detect its own working status and to display it on the LCD screen for user's reference.
• Both transmitter and receiver display preset transmitting power, transmitted codes, its own battery energy, mains voltage detected, AC/DC status of mains voltage detected, and warning symbol for mains voltage. Both the transmitter and the receiver can work under mute mode.
• The sensitivity of the receiver can be adjusted either manually or automatically. The receiver's LCD screen is provided with backlight for application in poor light, provided with flash light when working in darkness.

• 2.5mm universal SC Connector for KPM-35 Power Meter
• Wavelength(nm):1310+1550nm SM Light Source with FC, SC Connector
• Measurement Range:-70+10dBm for power meter
• Rubber armor protecion; Anti-proof; Power meter and Light Source Combine
• It offers power autonomy of 55 hours, for reliable, long-lasting performance in the field

• Traces and identifies cables quickly and accurately by using digital signal technology, avoiding noise and false signals
• Ability to send digital or analog tones in two distinct modes (one note'tone and two note'tone) with 9 levels of tone sensitivity and Adjustable volume control, LED indicator for visual Identification
• Cable map: pin'to?pin test for wiring faults on cables (opened/shorted/reversed/crossed/miss?wired), Probe works as Remote Unit with RJ45 Jack
• Telephone service and polarity test: +polarity; ?polarity; ringing
• Black and red alligator clips and rj-45 plug and jack to test cables and individual wire

• DEPEND ON US: At TREND Networks (formerly IDEAL Networks), our mission is to innovate test solutions that are fast, accurate, and empower network technicians, data installers, and system integrators to better power up their world
• COPPER CABLE TESTER: The VDV II PLUS allows a user to check the integrity of copper cables commonly found in domestic, commercial, or industrial voice, data, or video installations, including telephone wiring, data network, and video/security cabling
• INCREASE EFFICIENCY: This troubleshooting device offers functionality not previously available in a wiremapper. The device accurately measures cable length and provides distance to an open
• MULTIMEDIA SUPPORT: The integrated RJ-11/RJ-12 (voice), RJ-45 (data), and coax F-Type (video) connectors allow faster testing of most types of low-voltage cables by eliminating the need for separate testers or adapters
• ADDED FEATURES: The VDV II PLUS includes all the features of the VDV II including a hub blink function for port identification and a larger 2.9 screen display and backlight
• OPTIONAL ACCESSORIES: Simplify troubleshooting with the VDV II series optional accessories. RJ45 remote units and identifiers, as well as a set of numbered coax remote units, can be used to extend the remote testing ability for added onsite efficiency

• Extech MM750W Handheld Multimeter Digital Data Logger CAT III 1000 V, CAT IV 600V Display (Counts): 6000
• Contents: 1 item

• New BLACK deck railing design, clean and elegant. This cable railing kit includes 60 pcs left, 60 pcs right hand thread lag screws, wrench and 2 drill bit. Stainless Steel T316 material, anti-rust ,water and corrosion?marine Grade, good for indoor or outdoor usage.
• This deck railing hardware fit 1/8\" OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.
• Length of cable should be 1-1/2\" shorter than wood surface distance; if you want to DIY a high quality cable railing system, standard 1/8\" (OD) cable which was made of T316-stainless steel is recommended.
• By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won't be easily unfixed or destroyeded.
• The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. Hydraulic crimper is needed to connect the cable to lag screws.

• Supplies Power and Ground
• Digital Voltmeter with Min/Max Voltage Capturing
• 4mm banana jack
• 20 Foot power lead
• Authorized Power Probe Tek Dealer

• HD LCD Display This instrument has stable performance, high accuracy, high reliability and clear reading function. With a 3.7-inch high-resolution LCD digital display screen, it is clearer and more convenient to measure the data.
• Wide Compatibility Can test AC/DC current, AC/DC voltage, resistance, capacitance, etc., with diode, continuity, temperature and other functions test.
• 55000 Counts Up to 65 readings per second, support for two-line display, SCPI support, maximum display 55000 counts. An excellent tool for instruments and laboratories, factories, amateurs and families.
• Data Logging Function You can record the measured data in memory and then use the computer to read and process the recorded data.
• Easy to Operate Simple to operate interface and easy to use, you can access, store, process and manage data by simply displaying the results in tabular form.

• Built Shop Tough with Heavy Duty Construction case
• Loud Indicator Tones for Shop Environments
• Digital Multimeter for streamlined testing
• Large Bright Screen for easy readings

• Supplies Power and Ground
• Digital Voltmeter with Min/Max Voltage Capturing
• 4mm banana jack
• 20 Foot power lead
• Tests for Bad Grounds and Continuity

• INDUSTRIAL GRADE: The DL389B is a commercial grade clamp meter with enhanced capabilities for every industrial setting. Our clamp meter measures AC Amps, AC/DC Volts, AC/DC Microamps 2000?A, Capacitance 4000?F, Frequency 199.9KHz, Diode Testing, Duty Cycle, Temperature, Continuity, and Resistance 40M?.
• TRUE RMS: This industrial clamp meter features True RMS providing accurate measurements on any type of load.
• ENHANCED SAFETY: The DL389B provides increased safety with a CAT IV 300V & CAT III 600V safety rating. This clamp meter includes Non-Contact Voltage to identify live lines. There are input jack locks to protect your meter from blowing a fuse.
• GREAT DESIGN: Our clamp meter includes and easy to read backlit dual display with a magnetic mount for handsfree operation. The unit also has a work light to illuminate dark areas and test lead storage for easy transport. Other features include Auto/Manual Ranging Modes, Min/Max, auto power off to conserve battery, and a Low Battery Indicator.
• COMPLETE KIT: Also included with your clamp meter are test leads, K-Type temperature probe, 2 AAA batteries, and a zippered pouch for easy transportation.

• NF-858C Network Cable Tester, 1. Can use the host and the remote to test the open circuit, short circuit, open circuit, cross, reverse connection of the network cable, BNC video cable, etc., and display it visually on the LCD. 2. Can find the required target line in many network cables, telephone cables, video cables and various metal cables.
• 3. It can measure the length and breakpoints of network cables, BNC coaxial cables by the method of open circuit, the length of cables can be measured up to 2000 meters, and the accuracy of measuring the length of cables and the location of breakpoints can reach 98%. 4. Using the port flashing function, you can quickly find the specific network cable when the switch and router are powered on.
• 5. Carry out crosstalk test on the network cable to solve the potential failure of slow Internet access. 6. Testing the state of the telephone line and the polarity test of the telephone line. 7. Testingt the voltage and status of the POE switch.
• 8. Using the red light pen function to test the breakpoint and light leakage of the optical fiber. 9. Record function: can query the record of the previous test cable. 10. Lighting function, convenient to work in dark environment.11. Low battery prompt function. 12. Equipped with four remote ends, four groups of lines can be tested at the same time, the corresponding remote ID numbers can be displayed on the screen.
• Package Include: 1Set x NF-858C 1 Pcs x Charging Adaptor 1 Pcs x Charging Cable 1 Pcs x BNC - RJ11 Adaptor Cable 1 Pcs x Alligator Clip 1 Pcs x Earphone 1 Pcs x Product Instructions 1 Pcs x Carry bag