Industrial & Scientific Store - Fasteners

• Application Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread
• This tool is required for insertion of helicoil inserts
• The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly
• Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread
• The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device

• STAINLESS STEEL SCREW AND WASHERS Hard and sturdy Stainless Steel Screw with Washers, Yellow Zinc Plated Dowels which prevents oxidation and Corrosion Resistance to create a longer lasting finish.
• ALLEN SOCKET COUNTERSUNK TYPE HEAD Superior Allen Socket Head which ensures, no slips while tightening. Countersunk (CSK) provides good appearance and finish.
• FULLY THREADED SCREW Fully Threaded Fastener with a uniform diameter the entire length of the shaft so that it can be used with dowel in any position.
• WIDE VARIETY USAGE AND APPLICATION Used in various DIY (Do-it-Yourself) applications like fixing wardrobe, beds, baby beds, cribs, cots and flat pack furniture, chair, table, storage units, drawers, cupboards, also good for office appliance, communication equipment, ship assembly and other machinery industry.
• QUANTITY - Set of 10, 8mm Thread and 70mm Length Allen Socket Head Counter Sunk Screw=10 pcs pack, Corresponding 8mm Hole Barrel Nut / Dowel Nuts=10pcs, Corresponding Washers=10 pcs. Total 30 pieces in package. No Warranty.

• Thread Size: 4.2mm ( #8); Thread Length: 25mm (1 inch); Head Diameter: around 8mm; Head Height: around 2.8mm
• Package: 100 PCS
• Material: 410 Stainless Steel and no exterior finish, provides great strength and good corrision resistance. Harder and higher tensile strength than 304 stainless steel.
• Phillips Drive No: #2
• No pre-drilling needed. The self drilling tek points drill into light metal and sheet metal easily.

• The T-nuts are made of high-quality carbon steel has higher strength. With zinc plated on the surface gives it strong anti-corrosion and anti-rust performance, can be used for a long time. Material: Zinc Coated Steel These T-nuts can work both indoors and outdoors and are most suitable for wooden materials. It can be used to install furniture legs for beds, tables, closets, and can also be used to hang chandeliers.
• Material: Zinc Coated Steel
• These T-nuts can work both indoors and outdoors, and are most suitable for wooden materials. It can be used to install furniture legs for beds, tables, closets, and can also be used to hang chandelier.

• Product Type :Nuts
• Package Dimensions :22.606 Cm L X 17.272 Cm W X 1.016 Cm H
• Country Of Origin :China
• Package Weight :1.0Lbs

• MATERIAL: Made of high quality carbon steel metal ring and a rubber gasket, not easy to rust, rubber ring uses oil resistant NBR and fluorine rubber.It's service temperature is -25~+100,working pressure less than 40Mpa.
• PACKING QUANTITY: 200Pcs washer 10 sizes: M6--20Pcs; M8--20Pcs; M10--20Pcs; M12--20Pcs; M14--20Pcs; M16--20Pcs; M18--20Pcs; M20--20Pcs; M22--20Pcs; M24--20Pcs.
• SUITABLE FOR: Bonded washers are used extensively for sealing under the heads of bolts in high pressure applications where coppers washers would be unsuitable. They are often used in hydraulic and pneumatic connections that are subject to extreme pressures.
• PLASTIC HEAT SEAL PACKAGING: Practical and convenient of packing box, All of bonded washers packed in a durable and sturdy box, this box can be use for a storage box.
• DURABLE DIVIDED STORAGE CASE: All Bonded washers are packed in the box with size label and divider, easy to store and won't mix up.

• SIZE: 1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut.
• MATERIAL:Our toggle bolts made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items.
• FEATURE: Collapsible spring-loaded wings design allows you to fold the wings so that they can be placed in the drilled hole. The wings will open behind the plasterboard to provide a reliable fixation.
• WIDE APPLICATIONS:Our metal toggle bolts can be used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, whats more.
• EASY to INSTALL:First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in.

• Size: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
• Material: Durable Nylon, wear-resisting corrosion resistance
• Quantity: It contains 600pcs/9 Sizes of the most commonly used Nylon washers
• These flat washer provides a bearing surface for fastener load distribution and resistance to abrasion
• Widely Application: Perfect for electrical connections on household and commercial appliances, automotive and marine uses in which the power source has a threaded/bolt-type connection

• High Quality M1 M1.2 M1.4 M1.5 M1.7 Phillips Rounded Head Small Self Tapping Screw Assortment Kit
• 15 Kinds different little size,Phillips Rounded Head total 750 pcs;Length is measured from under the head
• Models Quantuty: each size 50pcs,M1x3mm; M1x4mm; M1x5mm; M1.2x4mm; M1.2x5mm; M1.2x6mm; M1.4x4mm; M1.4x5mm; M1.5x4mm; M1.5x5mm; M1.5x6mm; M1.7x5mm; M1.7x6mm; M1.7x8mm
• Material: Carbon steel, Ni-Plated.Phillips Pan Head
• Packed in a plastic box,surround unscrew.Can be used for eyeglasses, watches,clocks,Mobile phone etc. A handy accessory to your tool kit

• Material :? Mild Steel
• Pack Quantity (Pcs.) : 15
• Size ( L x W ) mm : M10
• Bolt Body Diameter (mm) : 10
• As per availability full thread or half thread

• Straight brace brackets are designed for reinforcing, attaching, connecting and splicing panels and other home and industrial applications.
• PREMIUM BUILT To ensure durability, we have given the oxide finish to these metal screws to make them free from rust. Ideal for specific measurement purpose, you can rely on it for years.
• Drywall Screws is Phillips type fastener that is made out of premium metal. It can be used for fixing wood, gypsum board, plywood, fall ceiling, plasterboard, etc.
• MULTIPURPOSE You can use fine threaded screws for various hardwood related tasks as these screws are smaller helix angle which allows you to do the finer adjustment with ease.
• If you do not satisfy with products or if you have any question, please come to us. We would work out satisfactory solution to all your problems.

• Constructed of solid brass, ensuring quality and longevity
• Brushed nickel finish to resist daily corrosion, scatches and tarnishing.
• Each screw cover 20mm in diameter.
• Package include: 10 x Screw Covers, 10 x Washers.
• Easy to install and clean. 100% satisfaction guanteed by Alpha.

• easy to install

• [Application] used as a fastener to combination, connection, fixing, Screw and Bolts can connect furniture or parts together, and can be widely used in cabinets, furniture, wooden boards, cribs, workbenches, tables, leather crafts, thin photo albums, decorative bags, belts, leather bags, sandals, boots, etc.
• [Premium Material] All furniture connector bolts are made of outstanding high strength good finish plated material with high stability, which are corrosion resistance and rust resistance, not easy to break, sturdy, and durable for long time use.
• [Easy to Install] Just insert the furniture screw into the hole on one end and insert the nuts to cover the screw on the other end, finally use the wrench tighten the bolts nuts. Threaded post lets you open and re-attach piece where needed.
• [Recommended] -Applicable pre-drill proper Hole; Thickness applicable to objects to be locked. The thickness of the object which is locked, must be less than the length of the screw rod + nut rod, otherwise, it will not be able to tighten
• [Easy to Store] All screws are packed in a sturdy and easy-to-use plastic storage box, which is not easy to mess up or mix up, and it is convenient and easy to organize and carry.

• Quantity: Contains 24 sizes 660pcs nuts bolts washers of the most commonly used to meet different needs.
• Various Size: Includes 8mm 12mm 16mm 20mm M3 M4 M5 M6 metric bolts assortment.
• Material: Made of high quality 304 Stainless Steel, good performance of rust and corrosion oxidation resistance, ensure long time using even in bad environment.
• Workmanship & Package: The thread is very sharp and sturdy, not easily strip with screw gun, and be packed in a sturdy convenient case, can be use for a storage box organized to you.
• Wide Application: Widely used in bicycle, furniture, car license plate, automobile, electrical connections on the power source of household and commercial appliances, and other places of indoor or outdoor.