Fasteners By Jake Sales

• Stainless Steel Screws Provide Ultimate Corrosion Resistance. Excellent for Coastal Applications
• Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation.
• Quality Wood Screw Thread Require Less Driving Torque And Provides Maximum Holding Power.
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads.
• ACQ treated Lumber compatible. Type 17 Notched Screw for Quick Starts without Pre-Drilling

• Screw Dimensions - ~5/16\" Thread Diameter - 11/16\" Head Diameter - Length 6\"
• Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible
• Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures
• Type 17 Notched Extra Sharp Point for Quick Starts without \"Walking\", Reduces Need for Pre-Drilling
• Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces

• High Performance Exterior Coated Star/Torx Drive Wood Lag Screws (100 LAG SCREW COUNT)
• Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
• Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

• Screw Dimensions - ~5/16\" Thread Diameter - 11/16\" Head Diameter - Length 16\"
• Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible

• Multipurpose Screws, Manufactured from High Quality Heat Treated Steel with Bronze Exterior Coating
• Jake Sales
• Multipurpose Screws, Manufactured from High Heat Treated Steel with Bronze Exterior Coating
• Quality Wood Screws; ACQ Compatible with Treated Lumber, Outstanding Abrasion Resistant

• High Performance Exterior Coated Star/Torx Drive Wood Lag Screws (100 LAG SCREW COUNT)
• Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.
• Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

• Dimensions: Head Height/Width .469 - Diameter .24\" - Length 12\" - Use 5/16\" Hex Head Bit
• These screws are a far superior alternative to spikes for greater holding power.
• Manufactured from high quality heat treated steel and are ACQ treated lumber compatible
• The black log screw coating passed the 1000 hour salt spray tests without failure
• Black Log Timber/Landscaping Screws Have Drag Reducing Knurled Shoulders for Easier Installation

• Screw Dimensions: Height .109\" - head diameter .438\" - Use T-20 Torx
• These screws are coated with a black exterior coating for use with ACQ lumber and exterior use
• \"V\" shaped notches in the threads for cutting board fibers at lower touque settings

• Dimensions: Height .625\" - Head Width .625\" - Shaft .265\" - Length 6\" - Use with T30 Torx Bit
• Bronzed Coated Exterior - Prevents Rust and Corrosion - ACQ Lumber Compatible
• Type 17 Notched Extra Sharp Point for Quick Starts without \"Walking\", Reduces Need for Pre-Drilling
• Knurled Screw Shoulder Lowers Drill Torque Requirements, High Quality Threads Cut Clean and Easy
• Great Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam

• Drill Point Cement Board Screws for Fastening Cement Board to METAL Studs
• Manufactured from High Quality Heat Treated Steel, Corrosion Resistant, Ceramic Coated
• For All Brands of Cement Board; Hardiebacker, Wonderboard, PermaBase DuRock Backer Board
• Cutting Nibs Under the Head Cleanly Countersinks Screw Head Flush With Surface During Installation
• Drill Point Tip Means No Pre-Drilling is Necessary and Will Cut Into Metal Stud to Secure Product

• Use Slower Drill Speeds While Sinking Screws
• Exterior Coated C-Deck Decking Screws are Manufactured from Heat Treated Steel
• These Composite Decking Screws are Usable With ACQ Treated Lumber Applications
• Compatible With Trex Decking, Fiberon, Azek, Timber Tech Brands and other Manufacturers
• Color of Screw Will Closely Match Most Manufactures Product - While Some Variation May Occur

• Screw Dimensions: shaft diameter .19\" - height and width .5\" - head diameter 0.145\" - Use T-25 Torx
• These screws have a triple layer ACQ compatible bronze coating for exterior or interior use
• Screws have been through 1,200 Hours of salt spray testing without coating or screw failure
• Modified truss washer head wood screws have great compression strength
• Heat-treated hardened steel for high tensile and high shear strength

• Dimensions: Shank Size .177\" - Height and Width 0.38\" Use T25 Torx/Star Bit
• Triple Ceramic Coated Exterior Coated Screws to Protect Against Corrosion and Rust Resistant

• Triple Ceramic Coating, ACQ Treated Lumber Compatible, Abrasion Resistant
• Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation
• High Performance screws, made from High Quality Heat Treated Steel with Triple Ceramic Coating
• Quality Wood Screws; ACQ Compatible with Treated Lumber, Outstanding Abrasion Resistant

• Triple Ceramic Coating, ACQ Treated Lumber Compatible, Abrasion Resistant
• Jake Sales
• Quality Wood Screws; ACQ Compatible with Treated Lumber, Outstanding Abrasion Resistant
• Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation

• Drill Point Cement Board Screws for Fastening Cement Board to METAL Studs
• Manufactured from High Quality Heat Treated Steel, Corrosion Resistant, Ceramic Coated
• For All Brands of Cement Board; Hardiebacker, Wonderboard, PermaBase DuRock Backer Board
• Cutting Nibs Under the Head Cleanly Countersinks Screw Head Flush With Surface During Installation
• Drill Point Tip Means No Pre-Drilling is Necessary and Will Cut Into Metal Stud to Secure Product