Industrial & Scientific Store - Fasteners

• Strong & rust-resistant, powder-coated carbon steel
• Provides additional support on vehicles raised off their wheels
• Pin-type post for 2 height adjustment
• Folding design for easy storage
• Maximum capacity per stand: 2000kg (must be used in pairs)

• HIGH QUALITY TO BE TRUSTWORTHY. 8.8 Grade Alloy Steel, corrosion resistance property, features good wear resistance, high hardness and high strength.
• MANY SPECIFICATION TO BE CHOSEN: M6x16mm,M6x20mm,M6x25mm,M6x30mm,M6x35mm,M8x20mm,M8x25mm,M8x30mm,M8x35mm,M8x40mm,M10x30mm,M10x35mm,M10x40mm,M10x45mm,M10x50mm, Includes 15 Most Common Sizes; Flange bolts have a flange on the bottom of the head that distributes the load like a washer.
• STANDARD SIZE(Tolerance:?0.005mm): Uniform force, located in the center of the head with no offset, not easy to slip; Uniform pitch, obvious screw thread, no residual burrs, the set screw threads will be able to get a good grip. (Pitch Size: M6*1.0mm?M8*1.25mm?M10*1.5mm)
• PLASTIC HEAT SEAL PACKAGING: Practical and convenient of packing box, All of screws and nuts are packed in a durable and sturdy box, this box can be use for a storage box.
• THE WIDE APPLICATIONS: Door handle, faucet, light fixture, knobs, locks and toys, , plumber and other small repairs around the shop, garage or home; and all kinds of precision machinery, classified instruments, electronic products, household appliances, communication products.

• 1/2-inch by 10-inch Anchor Bolt
• Nut and Washer Included, 50 Per Box
• For Attaching Bottom Plate or Sill Plate to Newly Poured Concrete Foundation
• Washers and Nuts Included
• Meets ASTM A307 Specifications

• 5/16 x 6-Inch length, Includes One 25mm T-30 Star Bit
• T-30 Star Drive, Torx(tm) Compatible
• Patented ASTER thread for quick starting
• Sharp Type-17 Point for easy drilling
• PPG Industries 1,500 Hour Golden E-Coat

• All parts are heat treated
• Made of powered casting steel for stronger strength

• Multipurpose Yellow Zinc Triple Coated Screws, Excellent Screws, for Both Hard and Soft Wood
• Flat Head Wood Screw with High Quality Heat Treated Steel almost Eliminates Screws Breakage
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation

• Size: 1/2 inch X 6 inch
• Heavy duty wood screw with 6 sided hex bolt head
• Features deep wood screw threads and does not accept a nut
• Used in applications where standard wood screws cannot support the load (deck building, etc.)
• Requires pilot hole to be drilled and installs using wrench or socket tool

• Concealed-flange design provides cleaner lines for visible applications such as second-story decks and patio covers
• Allows connection flush with header or ledger ends
• Suitable for 2x10 and 2x12 lumber
• Made from 18 gauge steel
• ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications

• HOT DIPPED GALVANIZED - Helps prevent rusting in moist environments
• WIDE RANGE OF SIZES - Insures proper fastener for best results
• PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
• HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation

• ZINC PLATED - Helps prevent rust in dry environments
• WIDE RANGE OF SIZES - Insures proper fastener for best results
• PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
• HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation

• Anchor Rotates 360 and pivots 180 side-to-side conveniently helping avoid side loading or accidental disengagementCan be used for permanent and temporary installations supported for steel
• Anchor can be used for single user anchoring point or in combination with other approved anchor as part as a temporary horizontal lifeline system Anchor is built highly durable and built tough for long lasting performance job over job
• Anchor comes with bolt included so it's ready to use straight out of the bag Static Tensile Strength: 5,000-lbf/22kN
• User Maximum Capacity: 310 lbs Application: Steel Anchorage Product Weight: 1.2 lbs
• Meets or exceeds ANSI Z359.18, ANSI Z359.7, OSHA 1910.140, OSHA 1926.503, EN 795:2012

• 3 in. x #8 Square Head
• Collated Screws
• Exterior Finish
• Type 17 point
• Includes 800 screws

• Versatile utility connector for joining wood members together in a corner connection without angled cuts
• Fastens with Simpson Strong-Tie Outdoor Accents 1-1/2 in. connector screws (not included)
• Easier and stronger than angled fastening
• Nominal post size: 2x4
• Nominal joist size: 2x. Made from 18-gauge steel. ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications.

• WILL CUT ITS OWN THREAD INTO CONCRETE - When inserted in to properly drilled hole
• LOW TORQUE THREADS - easy installation
• SERRATED HEX WASHER HEAD - Prevents back-out
• SINGLE PIECE DESIGN - No assembly required; ready to install
• USE A STANDARD BIT - bit size is the same as the anchor diameter

• Practical Dimension: the carriage bolt has many different sizes for you to choose, providing holding power for heavy applications; These various size can cater to a wide variety of needs, ensuring dependable and robust structural support across a host of applications
• Comprehensive Kit: the complete carriage bolt kit comprises enough carriage bolts, washers, and nuts, providing a generous amount of connectors that allow for several uses, making it a practical choice even for larger projects
• Quality Material: these long bolts are made of galvanized material, characteristically known for their rust resistance, offering an ideal protective capacity; This quality material also ensures a long lasting and reliable performance, making it a worthy investment in home improvement and industrial projects
• Nice Fastening Performance: designed for securing wooden parts to wood or metal, the galvanized carriage bolt set makes operative tasks easier and more effective; The carriage bolt design contributes significantly to nice fastening performance; Their holding strength ensures the stability and reliability of your constructions
• Widely Applied: the design of the galvanized carriage bolt caters, specifically, to the fastening of wooden components to wood or metal, they are suitable for heavy applications like decks, pavilion, and other structures that require sturdy support

• VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
• 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
• PRE-ASSEMBLED - Ready to install no separate parts required
• ALL STEEL PARTS - Heavy duty for the most demanding jobs
• ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results