Industrial & Scientific Store - Fasteners

• INSTANT VISUAL INDICATOR: These dual-purpose one wheel accessories quickly indicate and retain against unwanted wheel nut movement, and indicating any overheating of wheels caused by faulty brakes or bearings to prevent the wheel from coming off.
• SUPPORTS FLEET SAFETY CHECKS: Enable visual checks and monitoring to see in real-time what's going on with all of your wheels with our wheel nut indicator! It keeps track of wheel nut tightness, so that they don't slip and cause engine damage.
• BIODEGRADABLE & COST-EFFECTIVE: Our loose wheel nut indicator is tested and verified by ASTM D5511 for enhanced biodegradation in biologically active landfills, saving the planet from over 200 tons of plastic waste each year.
• EASY OPERATION: Install these wheel nut indicators over the wheel bolt. By placing the Checkpoints in a recognizable pattern such as point to point, any movement of the wheel nut is clearly visible at a glance. It melts at 125?C or 257?F to highlight overheating issues with the wheel or application.
• MULTIPLE FITMENTS: Mainly for commercial vehicles such as trucks, agricultural vehicles, dangerous goods transporters, this visual indicator is also used in the industrial sector, and wherever safety critical fasteners can loosen due to heavy vibrations.

• MADE FROM HIGHEST GRADE 316 STAINLESS STEEL - Suitable for use in many caustic environments for superior rust resistance
• WIDE RANGE OF SIZES - Insures proper fastener for best results
• PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
• HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation

• ZINC PLATED - Helps prevent rust in dry environments
• WIDE RANGE OF SIZES - Insures proper fastener for best results
• PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
• HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation

• Diameter: 5/8
• Length: 6
• Head Type: Hex
• Drive Type: Hex
• Finish: Galvanized

• HOT DIPPED GALVANIZED - Helps prevent rusting in moist environments
• WIDE RANGE OF SIZES - Insures proper fastener for best results
• PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
• HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation

• 20 per pack

• 1-1/4\" LEG x 7/16\" CROWN 16GA GALVANIZED N15 STAPLES 10,000 Per Box Will fit S enco, Spot Nails

• Box quantity ?260PCS/ 5LB There are international standards for the production of screws. This is a standard product, so this product is generally difficult to have problems or bad, but in order to prevent mistakes and unpleasant shopping, please pay attention to these three points: the size you need, The crafting materials and hardness values used, which are in our introduction, yes, so you can buy the right item
• size :#14?2-3/4 inch (M6?70) bit ?T30
• Note: For each box you buy, there is only one SIZE, not Assortment Set
• Materials and Grades ?made of Carbon steel A22 Screw strength grade 8.8 Galvanized
• Use occasions ?hardwood, decking, MDF, plastic, sheet materials plus many other applications.

• BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
• FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver
• SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
• DIAMOND POINT-Easier to drive the screw to save time

• WAY EASIER TO USE THAN STANDARD WEDGE BOLTS: No wrenches, fasteners, or other tools necessary for installation! Just insert these into your pre-drilled holes and they?ll secure your formwork panels. If you?re having issues installing, we recommend using a rubber mallet.
• SECURELY FASTENS CONCRETE FORMWORK PANELS: These wedge anchor bolts ensure a reliable and secure fastening of concrete formwork panels, preventing any movement or shifting during the pouring and curing of concrete. They provide stability to the formwork system, ensuring precise and consistent concrete shapes.
• EASY TO REMOVE & REUSE: Because these types of concrete anchors have a simple design with no extra parts and don't require tools for installation or removal, they can easily be removed (when applicable) from the formwork panels and reused without any hassle.
• FITS A VARIETY OF SIZES OF PRE-DRILLED HOLES - The versaitle design means you can use this for a variety of sizes of pre-drilled holes in your formwork.
• MADE FROM DURABLE BLACK ANNEALED STEEL : These wedge anchor bolts are made from black annealed steel, providing durability and resistance to the pressures and loads exerted by wet concrete. They are capable of withstanding the rigors of repeated use, making them suitable for multiple formwork projects.
• ALSO USE FOR MASONRY (BRICK) APPLICATIONS: You can also use these concrete anchor bolts for masonry (brick) jobs
• STURDY FORMWORK CONNECTIONS: Hold down your loop ties and x-flat ties ensuring the structural stability to your concrete formwork, as well as proper alignment during the pouring and curing processes.

• Adequate Quantity: there are 50 pieces of concrete screws, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends
• Pocket Size: each of concrete screws and anchors is about 3/8\" x 3\", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience
• Quality and Sturdy Material: hex concrete screws are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment
• Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install; The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out
• Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block; Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter

• Specifications : OEM Factory Mag Washer Style Lug Nuts - M14x1.5 thread size - 7/8\"(22mm) hex size - 1.77 inch(45mm) Overall Length - Mag Seat - Set of 20.
• Packaging : 20PCS M14x1.5 7/8'' (22mm) OEM Factory Mag Washer Style Chrome Lug Nuts.
• Vehicles Fits : 1998-2007 LX470, 2008-2021 LX480, 1998-2021 Land Cruiser, 2008-2021 Sequoia, 2007-2021 Tundra
• Process and Material : Manufactured with SCM 435 cold forged steel. Additional Heat Treating ensures dependable strength & durability. Precisely machined threads ensure a perfect fit on your vehicle's wheel studs. Special coating provides exceptional corrosion resistance and appearance.
• Warranty and Services : All FLYCLE lug nuts are covered by 1 year warranty,free replacement and full money back guarantee.If you have any questions or dissatisfaction,please feel free to contact us,we will help to solve in time.

• PREMIUM QUALITY Quality and customer first is our principle, we adopt the stronger material carbon steel to make up this box. we enhanced the hardness of the screws by heat treatment which can efficiently prevent slip and break. With a stable and reliable quality, WELLOCKS screw set will be your best choice.
• EASY TO ASSEMBLE The pocket screw system is so easy to use that even a novice woodworker can make strong, tight joints on the first try. You clamp the pocket hole jig onto your workpiece and drill angled holes with the special stepped drill bit. Then you simply align the two pieces to be joined and drive a pocket screw at an angle into the pocket to connect your pieces. The result is a tight joint that's as strong as a mortise-and-tenon joint but takes a fraction of the time to assemble.
• LONG-LIFE AND IMPROVED RUST-PROOF This mechine screw assortment was add one more anti-rust producing process of blue zinc coating, and thicken the coating thickness to 2 ?m to enhance the anti-rust capability, and we have passed over 38 hours salt spray test. That is say it can be used for 3 years in normal environment without rust is much more better 1 year common standard.
• ENVIRONMENTAL SURFACE TREATMENT We are strict accordance with ROSH standard to make sure each part we send to our customers should be safe and environmental. The screws are coating by Cr3 white zinc that is harmless surface treatment and safe to use. Notes: there is minor quantity error in the package way of weight, if you didn't receive a complete set, contact with us and get the refund part of money.
• THE BRAND YOU CAN COUNT ON WELLOCKS starts with the idea of providing a range of screws that are frequently-used to the many people. It is achieved by combining function, quality, and value always with sustainability in mind. We welcome you to visit our store to one-stop shopping for the hardware you need.

• Thread: Coarse / Full Thread / 316 /
• Recommended Hex Socket Allen Key Wrench: 3/16

• Replaces Part We can provide the perfect replacement for your 12mmx1.5 Factory OEM Black Mag Washer Style Black Lug Nuts for Tacoma 6 Lug, 4 Runner, FJ Cruiser MATRIX GX460 GX470
• Specifications 12x1.5 Thread Pitch;1.87'' (47mm) OAL;13/16'' (21mm) Hex; Flat Washer Seat; Shank Height: 0.5''; Shank Width: 0.73\"; Color: Black
• Package Includes A set of 24. Replace 611212, 9008494002, 99052, 19204273, 6111671, 9008017036, 9094201058, 9094201095,611167,99017, 990171, 98125
• Features One-piece Solid lug nuts is made of 10.9-grade Heat-treated premium steel construction and Corrosion tested - 72-hour salt spray testing .which has better strength, durability, corrosion resistance and service life.
• Warranty 12 Months Warranty, The integral solid wheel nut is Built To Strict Quality Control Standards,100% New And High Quality