Industrial & Scientific Store - Fasteners

• 0.7mm 0.8mm 0.9mm 1.0mm 4 different size needle
• Screwdriver Repair Watch Tools table tune hands Steel strap adjustment needle batch transfer table red needles Demolition strap
• Lightweight and durable. Can replace the pinhead by using screwdriver. Handy for removing watch strap Pins.
• Knurled non-slip studded handle. An ideal set of pin punches, made just for removing pins and good for riveting watch and jewelry items. Remove and adjust bracelets quickly and easily. Easy to use and make a necessity in your watch repair tool kit.
• Steel Punch Watch Band Linking Pin Remover Punches Bracelet Repair Tool Kit Accessories 0.7/0.8/0.9/1.0mm

• Material?304 stainless steel,sturdy and not rusty
• Thread size?M3,M4,M5,M6,M8 for your choice
• Designed with partial anti-skid surface
• With open end, small flange, round hole, threaded inner wall,this kind of rivet nuts are popular as connector or fastener
• Pack of 20Pcs

• Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting
• Flat-bottom head and smooth shank draw the pocket-hole joint together tightly
• Case-hardened steel wont bend, snap, or break
• Fine threads for hardwoods such as oak, cherry, maple
• Pan-head screws for use with Kreg Micro-Pocket pocket holes

• Diameter: #6
• Length: 1-1/2 inch
• Material: Steel
• Finish: Black Phosphate
• Head Style: Flat (Phillips)

• Fits all torx and star?screws
• Solid steel handles
• Welded handle/blade connection
• Ergonomic handle design,smooth, non-porous handle coating
• Flywheel effect saves time

• easy to install

• easy to install

• Dimension 10-32 - 1/2\"
• High Quality Stainless The socket head cap screws are made of high quality stainless steel material. Countersunk bolts are high-hardness and good corrosion resistance in bad situation
• What You Get 50pcs x Socket Head Cap Screw
• Rest Assured 24h private customer service to respond to after-sales problems.If you don't know what size is right for you, feel free to contact us.

• Premium Material :All the flat head wood screws made of high quality Carbon Steel with Black Oxide Finish so that the wood screws are good to resistant to rust and good corrosion resistance in bad environment,great quality and durable.
• High Quality Workmanship :Adopting high-precise cutting technology, our M3 screws designed with coarse thread is very clean,precise, the deep and clear with a sharp tip, can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using.
• Quantity and Sizes :There are totally 100PCS flat head self-tapping wood screws, and the size is M3 x 10mm in US sizes or 3/8 Inch in Metric size.
• Wide Application :Typical uses are for installing dry wall /sheetrock, repairing wood furniture and cabinets. These Phillips drive small screws can be used on a wide variety of materials and are ideal for home, office, and shop use.
• Excellent service ?If there is any problem with the product or need more information, please contact us feel free, We will replace the small wood screw with another new one directly for you or assist you as you need,as quickly as possible so you may continue your project.

• Screw Type: #8, Wafer Head, Phillips Drive; Material: 410 Stainless Steel
• Screw Length: 3/4\" (excluding the head height); Head Diameter: 10.8mm; Head Height: 2mm
• Quantity: 100 PCS; Phillips Drive No.: #2
• High Quality 410 Stainless Steel, with great strength and good corrosion resistance
• Amazon Protected Money-Back Satisfaction Guaranteed

• High-quality materials: The fixing screws and wrenches are made of stainless steel, not rusty, pollution-free, and durable.
• Fixing screws: headless screws that are flush with or below the surface after installation. The internal socket driver needs to use an Allen key (hex wrench) to install.
• Scope of application: Often used in machinery to secure gears to shafts.
• Function: Installs into an internally threaded hole to hold an object into place.
• Package contains: 25 x fixing screws + 1 x hex wrench.

• Thread Size: M6 x 12mm; Elastic Range: 8.0 - 35.0N; Ball Plunger Stroke: 1.3mm / 0.05\"
• Drive Type: Hex Socket; Hex Socket Width: 3mm / 0.12\"
• Package Content: 10pcs x Ball Point Set Screws
• Made of 304 stainless steel, sturdy and durable, can adapt to various indoor and outdoor environments.
• Ball point set screws are mainly used in fixtures and machinery for fixing and positioning.

• Thread Dia.: M6; Fit Rod Size: 25mm / 0.98\"; Rod Diameter: 5.2mm / 0.2\"; Total Length: 70mm / 2.76\"
• Hex Nut Size: 10 x 5mm / 0.39\" x 0.2\"(Hex Width*H); Frame Plate Size: 50 x 18 x 2mm / 1.97\" x 0.71\" x 0.08\"(L*W*T)
• Round Washers Size: 18 x 6 x 1mm / 0.71\" x 0.24\" x 0.04\"(OD*ID*T); Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates
• Great steel construct, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance.
• Application: Used to fix or connect the locked parts to pipes, wood, etc. Suitable for boats, plumbing, and other home and industrial applications.

• Hexagon screw head bolts come in a large variety of sizes and diameters.
• Zinc coated
• Suitable for indoor or outdoor use