Fasteners By Jake Sales

• Dimensions: Shaft diameter ~.203\" - Head Diameter ~.644\" - Length ~6.0\" - T30 Torx/Star Drive
  
• ACQ Compatible Coating for Outdoor or Indoor Use - 1,000 Hour Salt Spray Tested Without Failure
• Heat-treated hardened steel for high tensile strength and high shear strength

• 1/4\" Hex Head - 5/8\" EPDM Washer - Shank Diameter 0.221\" - Width 0.625\" - Height 0.195
• Self-Piercing screws are designed to push through pre-drilled sheet metal panels
• Stainless Steel screws are ultimate in corrosion resistance in high humidity areas - no corrosion
• Stainless Steel Screws are backed by a 50 Year Manufacturer Warranty against manufacturing defects
• These screws are great sheet metal roofing screws to use on any metal roofing or siding project
• Rough Estimation - Regular Roofing Project Should Require 80 Screws per 10' x 10' Section of Roofing

• Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

• 5\" Heavy Duty Gray Structural Ledger Board Screws (50 Count Pkg - Gray Structural Screws)
• Our Gray Structural Wood Screws Have Drag Reducing Knurled Shoulders for Easier Installation
• Hex Head Wood Screw with High Quality Heat Treated Steel almost Eliminates Screws Breakage
• The Gray Structural Wood Screw's Hex Head Provides Torque Maximum Torque to these Heavy Duty Screws
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power

• Self drilling Type #1 Metal to Metal Stitching Screws have a 5/16\" hex head with a 9/16\" EPDM washer
• Color on the roof screw heads is painted with a two part polyurethane for longer product life

• #1 Metal to Metal #3 Stitching Screws with Drill Point tip. 5/16\" Hex Head, 9/16\" Washer
• 250 COUNT Metal-to-Metal Galvanized Zinc screws are a natural gray color & rust resistant
• Hex washer head, drill point stitching screw with EPDM washer seal, seals roofing panel to screws.
• #14 x 7/8\" Metal to Metal Type #1 Screw is designed for attaching two metal panels together
• Corrosion resistance - over 1,000 hour salt spray tested without failures. Sturdy and reliable

• #12 Sheet Metal ROOFING SCREWS. Sharp Point ReGrip Screws. 1/4\" Hex Head, 5/8' Washer
• 250 COUNT Metal-to-wood roofing screws are painted with two part polyurethane for long life.
• Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws.
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc.
• Coated roof screw head is painted to closely match many brands of metal roofing on the market.

• #12 Sheet Metal ROOFING SCREWS. Sharp Point ReGrip Screws. 1/4\" Hex Head, 5/8' Washer
• 250 COUNT Metal-to-wood roofing screws are painted with two part polyurethane for long life.
• Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws.
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc.
• Coated roof screw head is painted to closely match many brands of metal roofing on the market.

• Coarse Thread, tread pitch on these bolts is 16 (3/8-16)) typical everyday use 3/8\" carriage bolt.
• Coated Outdoor application, galvanized steel to prevent rust
• Use for chain link fencing hardware, in the shop, the barn and for equipment repairooking Galvanized bolt. Easy to install.
• With these square neck bolts you need a square hole or slot in order for the bolt to back itself up
• Bolts eliminate the need for an extra wrench, head itself holds bolt from turning while you tighten

• Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

• Triple Ceramic Coating, ACQ Treated Lumber Compatible, Abrasion Resistant
• Jake Sales
• Quality Wood Screws; ACQ Compatible with Treated Lumber, Outstanding Abrasion Resistant
• High Performance screws, made from High Quality Heat Treated Steel with Triple Ceramic Coating

• 4\" Heavy Duty Gray Structural Ledger Board Screws (50 Count Pkg - Gray Structural Screws)
• Our Gray Structural Wood Screws Have Drag Reducing Knurled Shoulders for Easier Installation
• Hex Head Wood Screw with High Quality Heat Treated Steel almost Eliminates Screws Breakage
• The Gray Structural Wood Screw's Hex Head Provides Torque Maximum Torque to these Heavy Duty Screws
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power

• Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power
• Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance
• Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

• 6\" Heavy Duty Structural Ledger Board Screws - Exterior Coated (50 Count) Structural Screws
• Our Structural Wood Screws Have Drag Reducing Knurled Shoulders for Easier Installation
• These Screws Have a 5/8\" Washer Head and a 5/16\" Hex Head for More Torque and Easy Installation
• Triple Dipped Coated Timber Screws for Corrosion Resistance and ACQ Treated Lumber Compatibility
• Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power

• Screw Diameter .18\" - Length 1.5\" - Wide .50\" (EPDM seal) Height - .25\" Hex Screw Head 1/4\"
• Self-Piercing screw tip designed to push through pre-drilled sheet metal panels
• Stainless Steel screws are ultimate in corrosion resistance in high humidity areas
• The 1/2\" EPDM washer seals the screws to the roofing panel to prevent leaking
• Stainless Steel Screws are backed by a 50 Year Manufacturer Warranty against manufacturing defects