Fasteners By Newport Fasteners

• Thread: Coarse / Full Thread / 316 /
• Recommended Hex Socket Allen Key Wrench: 3/16

• Diameter-Threads Per Inch: 7/16-14
• Length: 7 inch
• A307 is the specification for carbon steel bolting, studs, and threaded rod with 60,000PSI tensile strength. Standard Hex Head

• DIN 931
• Coarse Thread
• Partially Threaded
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• Grade 8 Steel made of alloy steel and has six radial lines on the top of the bolt head
• Finish: Zinc Yellow
• Fine Thread / Fully Threaded
• Manufactured to ASME B18.2.1 & SAE J429 specifications
• Tensile Strength: 150,000 psi. min, 1/4 1.5 inch diams)

• Grade 8 Steel made of alloy steel and has six radial lines on the top of the bolt head
• Finish: Plain
• Coarse Thread / Fully Threaded
• Manufactured to ASME B18.2.1 & SAE J429 specifications
• Tensile Strength: 150,000 psi. min, 1/4 1.5 inch diams)

• Manufactured to ASME B18.5 Specifications

• HIGH QUALITY STAINLESS STEEL: These #12 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today.
• GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects.
• Type 17 Point - This thread cutting screw is ideal for use with wood; it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling
• Features a Bugle Head, and a Square drive to be used with a #3 Square Drive
• Size Number: #12 / Length of Screw is 2-1/2\" inches with 1-3/4\" inches of thread

• Diameter - Thread Pitch: 1/4\" - 20 / Length from Under Head: 2-1/2 Inch
• Coarse Thread / Partially Threaded
• 18-8 Stainless steel hex cap screws offer protection from weather and corrosive environments
• Rust resistant in fresh water environments, for salt water environments use the 316 stainless steel version
• Called hex cap bolts or hex cap screws

• Thread: Coarse / Full Thread / Case Hardened / Black Oxide
• Thread Diameter-Pitch: 3/8-16, Length: 3/4 inch
• Coarse Thread
• Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel material is recommended for environments with moisture

• Manufactured to ASME B18.5 Specifications

• Made from Austenitic alloys
• Coarse Thread
• Fully Threaded
• Manufactured to ASME B18.2.1 dimensions
• 316 Stainless Steel

• Head Height 0.199\"
• Recommended Hex Socket Allen Key Wrench: 7/32
• Black Oxide is not a protective finish and will rust if exposed to moisture. Stainless Steel material is recommended for environments with moisture
• Thread Diameter 0.375\"
• Head Diameter 0.656\"

• DIN 961
• Fine Thread
• Fully Threaded
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• Coarse Thread
• Recommended Hex Socket Allen Key Wrench: 5/32 Inch

• HIGH QUALITY STAINLESS STEEL: These #12 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today.
• Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments.
• Type 17 Point - This thread cutting screw is ideal for use with wood; it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling
• Features a Bugle Head, and a Square drive to be used with a #3 Square Drive
• Size Number: #12 / Length of Screw is 5\" inches with 3-1/4\" inches of thread

• Zinc Plated Steel