Fasteners By US Cargo Control

• Working Load Limit: 15,200 lbs. | Made for in-line or straight pull applications only
• Hot dip galvanized for durability and weather resistance | Designed to ASTM F1145 specifications
• Features a jaw on each end which is fitted with a nut and bolt or a pin & cotter pin assembly
• M= 44.04 | N= 29.54 | BB= 12 | A= 1.25 (All Measurements in Inches)
• Quantity: 1 Turnbuckle

• Working Load Limit: 13.5 Ton. WLL is embossed on each shackle. Never exceed the working load limit.
• Diameter: 1-3/8\" | Pin Size: 1-1/2\" | Inside Height: 5.25\" | Inside Width: 3.63\" | Mouth Width: 2.25\" | Weight: 13.25 lbs. Shackles are sized accordingly to the diameter of the bow section rather than the pin size.
• Material: Galvanized Steel. Contains a thin coating of zinc oxide to protect steel from elements that lead to corrosion and oxidation.
• Safety Factor: 6:1
• Quantity: 2 Shackles

• Working Load Limit: 3,200 lbs.
• Eye bolts with shoulders can be used for either straight line or angular lifts
• Loading at an angle will significantly reduce a bolt's rated capacity. A 75 degree angle reduces the working load limit by 45%; a 60 degree angle reduces it by 65%; a 45 degree angle reduces it by 75%. Never load at an angle less than 45 degrees from the bolt center line.
• Material: Stainless Steel Type 316
• Quantity: 2

• Working Load Limit: 2,000 LBS
• Eye bolts with shoulders can be used for either straight line or angular lifts
• Loading at an angle will significantly reduce a bolt's rated capacity. A 75 degree angle reduces the working load limit by 45%; a 60 degree angle reduces it by 65%; a 45 degree angle reduces it by 75%. Never load at an angle less than 45 degrees from the bolt center line.
• Material: Stainless Steel Type 316
• Quantity: 2

• Working Load Limit: 5,200 lbs. | Break Strength: 26,000 lbs.
• Heavy duty forged steel, galvanized for corrosion resistance
• Shoulder eye bolts can be used for either straight line or angular pulls
• Please note: Loading at an angle will significantly reduce a bolt's rated capacity
• Quantity: 4

• Working Load Limit: 5,200 lbs. | Break Strength: 26,000 lbs.
• Intended for straight line pulls only.
• For angled pulls, choose a Shoulder Eye Bolt
• Material: Galvanized Steel
• Quantity: 4

• Working Load Limit: 3,200 lbs.
• Eye bolts with shoulders can be used for either straight line or angular lifts
• Loading at an angle will significantly reduce a bolt's rated capacity. A 75 degree angle reduces the working load limit by 45%; a 60 degree angle reduces it by 65%; a 45 degree angle reduces it by 75%. Never load at an angle less than 45 degrees from the bolt center line.
• Material: Stainless Steel Type 316
• Quantity: 2