Industrial & Scientific Store - Hardware Adhesives & Sealers

• foam

• PREMIUM EPOXY KITS include enough 5 to 1 marine epoxy resin and hardener to complete a variety of boat building and epoxy repair projects For wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel and lead Not for clear-coating projects
• IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics Self-leveling properties ideal for coating and laminating Combine with fillers to make a high-strength, moisture-resistant fairing compound, filleting material or adhesive
• CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 min at 75F for Fast Hardener, to 20 minutes at 75F for Slow Hardener Cures to a high-strength, moisture-resistant, light amber plastic solid that can be sanded and shaped
• CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems
• PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin

• self adhesive

• OVERVIEW: H-Seal is a food safe, solvent free, water-based concrete sealer designed for food preparation surfaces, bathrooms and outdoor applications. It is heat resistant up to 392?F making it great for use with hot pans and BBQ's and has a delicate matte finish which sets it apart from its competitors. It provides protection for 10+ years with proper maintenance and is designed for use in direct sunlight. H-Seal goes far! With coverage between 5-12m2 depended on surface roughness.
• FOOD SAFE & WATERPROOF: H-Seal is designed specifically for concrete countertops, sinks, food preparation surfaces, bathrooms and for outdoor applications. The sealer absorbs deep into the pores of the concrete to stop water right in its tracks. Instead water is rejected and just sits on the surface ready to be wiped away or trickle down the drain.
• MATTE FINISH & STREAK-FREE: H-Seal sets itself apart from its competitors with its smooth and consistent matte finish. It is super easy to apply and leaves a streak-free finish with a subtle shimmer that gives the most natural look to the concrete. See images for reference.
• HIGH TEMPERATURE: Rated up to 392?F, it great for use with searing hot pans, oven baking trays in the kitchen and even for more exotic applications like outdoor fire pits and BBQ's.
• COVERAGE: H-Seal goes a long way! 1 liter will cover 5-12m2 depending on the surface roughness. The smoother the surface the less sealer needed. For example for surfaces polished to between 1200-3000 grit H-Seal can cover up to 10-12 m2 and even more.

• HIGHLY DURABLE & FINISHED SIZE - Features 12 mil thick, and when you choose your size, you will get the exact size tarps, and it's not short a few inches from both sides.
• 100% VIRGIN POLYETHYLENE - This heavy duty tarp uses pure, virgin, non-recycled polyethylene, that's why our multipurpose tarp is super durable and won't tear, rip or rot.
• ADDED RESISTANCES - Aluminum grommets every 36\", shrink-proof, UV treated to defend against the sun, and resistances are all added to make our tarps even stronger!
• ENHANCED REINFORCEMENT - For extra support, poly rope is sewn into the hem on all sides to defy tearing and deformation, boosting its durability and security.
• ALL WEATHER PROTECTION - Protect your belongings against the forces of nature. During heavy rain and snow storms, our tarp will keep your stuff as undamaged and dry as possible.

• Sticky on both sides
• Clean removal
• Adhesive can be reactivated

• Flexo printers must have a clear understanding that the hardness of the adhesive tape has a significant influence on dot gain and solid densities.
• The plate mounting tape cushions vibrations and mitigates print defects that result from vibration in print cylinders.
• The tape's adhesive must hold the plate firmly in place during the printing process, yet allow for easy removal after the job is printed. If the adhesive is too aggressive it will leave unwanted residue on the plate or cylinder requiring added clean-up time. If the adhesive is less than sufficient, plate edge lifting or bubbling may result in affecting printing performance.

• Increases the shear strength on non-threaded cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakagePrevents corrosion

• Rain Guard Brick Sealer: The brick sealer restores, protects and extends the life of any brick, concrete surface against water damage, salt damage, efflorescence and lime
• Paver Patio Sealer: Does not alter surface appearance and does not leave a surface film. The paver sealer is made using no-sheen formula and non-yellowing technology
• Water Sealers: Our other specialty formulated products protect brick, pavers, paint, stucco, stone, wood, and concrete surfaces
• Brick Sealer: Rain Guard Brick Sealer comes in a ready to use and cost-effective concentrate formulas
• The water sealer can be used on horizontal and vertical surfaces. Protects your investment with 100% satisfaction and can be used anywhere in the country

• It can easily Pull any Cable into conduit / Duct / Pipe

• This item is Cabot 01-1000 Waterproofing Sealer, Crystal Clear,1 Gal
• Used For Painting Supplies, Caulk & Sealants Accessories
• The product is manufactured in United States

• Increases the shear strength on non-threaded cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakagePrevents corrosion

• Two-piece multi-purpose epoxy adhesive paste works as an adhesive, sealant and filler for a range of indoor and outdoor applications
• Binds many materials including fiberglass, wood, concrete, many metals, brick, glass, ceramics and rubber
• Sealing of leaks, gas and water tank and plumbing and masonry cracks
• Fills holes, castings and molds
• Application temperature range is 35 to 115 degrees F, and operating temperature range is -20 to +200 degrees F