Industrial & Scientific Store - Power Transmission Products

• TENNANT 377364, HUB-DRIVE BRUSH DISC, .75B 6T
• TENNANT
• These are Truck Specific
• Only Shown Parts are Included

• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 F
• SMOOTH PERFORMANCE Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures long life

• High quality aluminum alloy material ensures the durability of the product.
• The guide rail has high sliding table stiffness and low thermal deformation
• Ideal part for combined machine tools and automatic lines.
• The effective stroke is 700mm and available in three ball screw models for choice
• This guide slide is suitable for the automation industry

• SLS Coil Spring

• Ratio: 30:1
• Input Shaft Diameter: 5/8
• Output Shaft Diameter: 5/8
• Mounting Flange: 56C
• Rated HP: 0.25

• Manual hand lift chain block hoist features a 3 ton (6,000 lb) load capacity and is fitted with a mechanical load brake that allows for precise operation
• 1/4\" diameter chains are constructed from premium 20Mn2 alloy steel with a black oxide finish for added resistance from corrosion and grime; Load-sharing gears makes lifting heavy loads easy
• Equipped with (2) heavy-duty steel hooks with a safety latch clasp that rotate a full 360-degrees without twisting and bending; Rotating components are mounted on roller ball bearings to reduce friction and increase efficiency
• Ideal for industrial settings and job applications such as factories, construction sites, garages, workshops, warehouses, farms, docks, wharves, and mines
• Meets ASME B30.16 overhead hoist safety standards to ensure safety; Includes a limited 1 year manufacturer warranty

• 7 5/8\" Height
• 1/4\" Keyway Width
• Replaces OEM Bad Boy 037-6015-00, 037-6015-50

• [High quality]: This linear grade is made of high quality aluminium alloy material. It is light in weight and durable. Not easy to damage and rust, reliable quality, long service life
• [Convenient] :XY linear stage, light weight, small size, other equipment easy to install, easy to use
• [Good performance] XY linear slide has exquisite workmanship, low friction coefficient and strong versatility
• [Practical]: High-precision linear stage has high practicability because of its smooth surface, linear motion can be maintained and friction resistance is smal
• [Application]: The two-axis positioning table is widely used in machine tools, automation equipment, optical equipment and so on

• Two-bolt housing with ball bearing insert for a ready to mount installation
• Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads
• Relubricatable solid one-piece housing pillow block for maximum strength and rigidity
• Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft
• Felt seal to protect against contaminants and retain lubrication

• COMPATIBILITY - Fits 2005-2019 Ford F-250 Super Duty; 2020-2024 Ford F-250 Super Duty; 2005-2024 Ford F-350 Super Duty; 2005-2022 Ford F-450 Super Duty; 2005-2022 Ford F-550 Super Duty
• GET THE RIGHT PART Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 F
• SMOOTH PERFORMANCE Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life

• High Quality Rubber With A Heavy Duty Plastic Base
• A Direct O.E.M Replacement For Firestone W01-358-5423
• Cross References Firestone W01-358-5423, Granning or Reyco 5235 or Dayton 352-5423

• Rounded front and rear plate design, precision hole position processing.
• Ball screw accuracy: C7
• Stroke: 100mm/200mm/300mm/400mm/500mm/600mm(optional)
• Sliding table height: 66mm, width: 93mm, floor thickness: 11mm
• The sliding table is convenient and easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.

• Cast iron flanged housing with a solid base for vibration damping and structural rigidity
• Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads
• Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection
• Setscrew lock for a three-point contact hold on the shaft
• Grease fitting on the housing for reapplying lubricant

• Mini Linear Rail Guide Length: 59.06 inch / 1500mm. Block: MGN12 H Type carriage
• Made of Bearing Steel, move smoothly without deflection
• High precision, low wear and low noise, longer service life
• There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out
• Applied in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device

• 1-067-1/4\" SS Ametirc Part Number
• 1/4\" Diameter
• Precision Stainless Steel Ball
• Precision Inch Class G25 Hardened (63+/-3 HRC)
• Ground Stainless Steel 1.4125 (AISI 440 C)