Industrial & Scientific Store - Power Transmission Products

• Cast iron flanged housing with a pilot extension for accurate location and increased stability
• Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads
• Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection
• Setscrew lock for a three-point contact hold on the shaft
• Grease fitting on the housing for reapplying lubricant

• COMPATIBILITY - Fits 2002-2005 Dodge Ram 1500; 2006-2008 Dodge Ram 1500; 2007-2007 Chevrolet Silverado 1500 Classic; 2007-2007 Chevrolet Silverado 2500 HD Classic; 2007-2007 Chevrolet Silverado 1500 HD Classic; 2002-2006 Chevrolet Avalanche 2500; 1999-200
• GET THE RIGHT PART Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 F
• SMOOTH PERFORMANCE Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life

• COMPATIBILITY - Fits2019-2019 Ram 1500; 2020-2020 Ram 1500; 2021-2021 Ram 1500; 2022-2022 Ram 1500; 2023-2023 Ram 1500; 2024-2024 Ram 1500
• GET THE RIGHT PART Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 F
• SMOOTH PERFORMANCE Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life

• COMPATIBILITY - Fits 2011-2018 Ram 1500; 2019-2021 Ram 1500; 2019-2023 Ram 1500 Classic; 2009-2010 Dodge Ram 1500
• GET THE RIGHT PART Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 F
• SMOOTH PERFORMANCE Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life

• Fiberglass Cord for length stability and very low stretch
• Polychloroprene rubber compound for high adhesion
• Nylon fabric facing for wear resistance and high tooth shear strength
• Improved design for increased power rating over trapezoidal profiles allows for narrower belts
• Less noise generation as compared to comparable trapezoidal timing belts

• High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!
• Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 30AWG magnet wire is 3 pounds(10134 feet).
• This enamelled copper wire the insulation is made from Solderable Polyurethane,and protects the coiled wire from short-circuiting.Temperature rating 155 C (311 F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard.
• 30 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0098\"for perfect thickness.
• BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire.

• T-slotted aluminum bearing made for the 15 series.
• Measures 1.875\" tall x 5.5\" wide x 6\" long.
• Rides on the 3\" side of a 15 Series extrusion.
• Inlcudes pads, screws, and shims.
• Pads are made out of self-lubricating UHMW material.

• 2Pcs per package, 30mm x 60mm x 59.06\" / 1500mm long Black color t slot 3060 extrusions
• 3060 T Type Extrusions are perfect for 3D printers, CNC, DIY, laser engraver machine, automation equipment, workbenches, stands, furniture, fitness equipment, precision printers, automatic cutter machine
• Made with 6063 Aluminum material, adapting the latest anodizing technology, smooth surface and robust solid construction, long service time
• The 3060 aluminum extrusions are a great framing material, they are adjustable and can fit T nuts and hold T-Slot Nuts
• Coavoo, a seller foucing on the transmission field, we can cut the aluminum extrusion as your length, process the hole as you need, threading and so on. We can provide the extrusions as long as 5 meters long, if you need to buy in bulk, pls contact us

• COMPATIBILITY - Fits 2011-2019 Chevrolet Silverado 2500 HD; 2011-2018 Chevrolet Silverado 3500 HD; 2011-2019 GMC Sierra 2500 HD; 2011-2018 GMC Sierra 3500 HD
• GET THE RIGHT PART Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and rust, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 F
• SMOOTH PERFORMANCE Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life

• NINE LEVELS OF PERFORMANCE Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE Features an application-specific 18mm nitro-carburized piston rod to reduce scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity

• Helps absorb and dampen road input into your vehicle's suspension
• GM-recommended replacement part for your GM vehicle's original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

• Made to OEM Specifications
• Proven Strength & Reliability
• W01-358-9780 Equivalent
• 1R12-186 Equivalent

• APPLICATION: Different actuator/motors are not compatible with frame, the frame has strict demand for actuator/motors' minimum install dimension, stroke and plugs. The motor is suggested to replace OKIN model JLDQ.11.156.204D, and also can replce JLDQ.11.156.204D02/D04/D05/D05-JY/D06/D09, and JLDQ.11.156.204F/N series, a little difference may in plug location but not affect the function and use. Please check your motor brand and model first.
• DESCRIPTION: The actuator motor set is made of 1 motor and 2 connectors, connector with 5-pin round plug is for switch hand control, connector with 2-pin square plug and clip is for power supply.
• SPECIFICATION: Appearance: black (PA), silver white (aluminum); Stroke: 204 mm ; Minimum Inst Size (shrink): 156 mm; Maximum Inst Size: 360 mm; Load: push force: 1500 N pull force: 1500 N.
• NOTE: Please troubleshoot the switch and power supply first, then check the motor and plug, see if it matches your recliner motor.
• PACKAGE: 1* Okin refined motor. Easy to install.