Industrial & Scientific Store - Power Transmission Products

• Heavy Duty Linear Actuator 12V DC 12V Linear Actuator Motor, Has Excellent Load Capacity:750N/160LBS, Speed:10mm/s?Stroke Length:100mm/4 inch?Meet Your Various Needs.It Allows You to Use It for Different Needs.
• Excellent Quality Made Of Aluminum Alloy, Not Easy To Rust, Not Easy To Damage, Strong And Durable.This IP54 Actuator Is Designed To Withstand Complete Dust Ingress And Protection Against Water Exposure.
• Actuator Positive and Negative The Push Rod Is Driven By A Dc Motor, And The Telescopic Rod Can Only Be Retracted But Not Rotated. By Changing The Positive And Negative Poles, The Stretching Direction Of The Pull Rod Can Be Changed.
• Limit Switch & Low Noise There Are Limit Switches On Both Sides Of The Actuator Motor, Which Can Be Stopped At Any Position After Automatic Power-Off, And Has A Self-Locking Function. Low Noise Design, Noise Level Less Than 42db.
• Wide Range Of Use Can Be Used In Tractors, Camper, Coop Doors Opener, Dormer Opener, Several DIY Projects Such As An TV Lift Tables, Massage Beds, Electric Beds, Medical Chairs, Electric Sofas, Camera Frames etc. You Can Contact Us With Any Questions and We Will Reply Within 24 Hours.

• It is lacquered copper wire with an insulating layer on the surface. When using, you need to scrape the insulating layer on the surface with a knife at the connection.
• It has high smoothness and good color.
• It is easy to use and easy to understand.
• It is widely used and can be used in physical science experiments,small generators,motors,etc.
• SHOP WITH CONFIDENCE: To provide you with the highest quality service, If you have any question, please feel free to contact us.We will provide after-sales service until you are satisfied.

• Color Ball Pattern Screw Cap Made With High Quality Plastic.
• The designed with fastener caps in the back can be holded solid the self-tapping Screw. Avoiding the loose and granting.
• The fastener caps is not only for the frames, also can be decorate your home and more place you want.
• Easy to install with included mounting screws. It can be installed in minutes without special tool required. Instructions on back of the fastener caps.
• US BASE Corporation - Provide high quality customer service. Any request will be respond within 1 business day.

• Model: 608z Bearings: Single-row bearing for supporting radial and axial loads.
• Material: Carbon steel, durability and resistance to deformity under heavy loads. 34,000 RPM limit with grease lubrication.
• suitable for use in skateboards, inline skates, scooters, and other skating applications.Robotics or DIY Projects 3D Printer Radial Ball Bearings or Robotics
• Quantity - 4pcs

• V belt drive pulley is a compatible replacement part for Chicago Die Cast 400A
• Belt Size : 4L/A
• Material : Die Cast Z3A Zinc Alloy
• Keyway : 3/16\"
• Through Bore : 1.25\" , Groove angle : 34 degree , Inside Diameter : 5/8\" , Outside Diameter : 4\" , Width : .734\"

• V belt drive pulley is a compatible replacement part for Chicago Die Cast 250A
• Belt Size : 4L/A
• Material : Die Cast Z3A Zinc Alloy
• Keyway : 1/8\"
• Through Bore : 1.25\" | Groove angle : 34 degree | Inside Diameter : 3/4\" | Outside Diameter : 2-1/2\" | Width : .7\"

• V belt drive pulley is a compatible replacement part for Chicago Die Cast 300A
• Belt size : 4L/A
• Material : Die Cast Z3A Zinc Alloy
• Keyway : 1/8\"
• Through Bore : 1.25\" | Groove angle : 34 degree | Inside Diameter : 1/2\" | Outside Diameter : 3\" | Width : .688\"

• Installs before or after siding is installed
• Remove separable flanges for installation on structures with front sides
• One piece design, UV resistant plastic for smooth vertical mounting of lighting fixtures on all coating types
• Package Include: Awning Liner Mounting Block for Accessories Mounting. One piece design. Built in 6.8 cubic inch box. 1\" J-Channel Includes 1 x NM wire connector.
• Technical Description: Surface Mount; Material: Plastic; Capacity 6.8 cubic inches; Size 6.652 inches WX 1.126 inches DX 6.652 inches H

• 203KRR2 agriculture ball bearing 16.256mm round bore farm machinery bearings
• Bearing Material: Chromium Steel ( Gcr15 )

• Type: 12mm Bore and M12x1.75 Left Hand Male thread rod end. Maximum angular misalignment: 13 degree
• Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life.
• Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on.
• Capacity: 17KN Static Load Capacity, 13.4KN Dynamic Load Capacity.
• Features: Large load rating, low noise, anti-corrosion, tough, and durable.

• Package Content: 1 x Chain Sprocket, 2 x Set Screws
• Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
• The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
• The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
• Widely used in milling machine, drilling machine or other machinery transmission occasions.

• 1628-2RS (I.D.=5/8inch, O.D.=1-5/8inch, Thickness=1/2inch)
• 1628-2RS bearings are sealed on BOTH SIDES to keep lubricant in
• Made from Chromium Steel (GCr15), durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Static load rating of 1095 newtons and dynamic load rating of 2100 newtons

• Polydioxanone Veterinary Suture 2-0
• 3/8 24mm Reverse Cutting Needle
• 12 units per box
• Vetersut

• Specification Fast speed: 10mm/s; Input voltage: 12V DC; Stroke length = 10 inches (250mm); Retracted length = 14.8inches(370mm); Extended length=24.8inches(620mm); Maximum current draw = 3A.
• Heavy Duty Made of aluminum alloy, stroke linear actuator 12v provide max.900N pushing force and 900N pulling force, easily to lift up or down beds, industrial equipment.
• Low noise Linear actuator motor works with below 50 dB sound, suitable for hospital and massage. Built-in high quality limit switch, automatically switch off when it reaches in case of the motor idling.
• IP54 rated IP54 rated protection sealed against dust, water, and corrosion suitable for outdoors use. Linear motion actuators is suitable for massage sofa, recliner, TV lifter, lifting table, electric window opener, etc.
• Package Included 1 x 12v 10 inch stroke linear actuator; 2 x mounting brackets; 1 x Screw Set.

• Ultra-fine Jumper Wire: This new upgraded version of the flying wire, the wire diameter is ultra-fine, the use of copper material, good stretchability.
• Application: This ultra-fine jumper wire is easy to tin, thin and straight enough, specially used for flying wire patch points, suitable for electronic maintenance.
• Low Resistance: This mobile phone chip wire has no breakpoints, non-magnetic, low resistance, easy to use, and can be used with confidence.
• Specifications: The total length of the ultra-fine flying wire is approx. 120m / 131.2yd, the diameter is 0.02mm, the length is sufficient, and the service life is long.
• Convenient Storage: The insulated enameled wire is equipped with a round storage box, which is not only beautiful, but also easy to store and use, and easy to carry.

• 100% Size inspect for best install.
• Needle is made of strong and durable chrome steel.
• High load and good running properties.
• Reduce costs and replacement frequency.
• XIKE bearings simple and efficient choice.