Industrial & Scientific Store - Power Transmission Products

• 12V DC permanent magnet motor
• Thrust up to 6000 N in push.and up to 4000 N in pull.
• Elegant and compact design with small installation dimensions
• Noise level 48 dB (A), actuator not loaded.
• Duty cycle, Max 10% or 2 minutes continuous use followed by 18minutes not in use.

• Size - Model: HK1216 (Inner Diameter = 12mm, OD = 18mm, Width = 16mm; Dynamic Load Rating: 9.3kN, Static Load Rating: 11.5kN, Limit Speed: 20000RPM)
• Material - Chrome steel needle rollers with high and uniform hardness and wear resistance, high elastic limit and good rust resistance
• Features - The outer ring of the needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• Application - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway. Such as transmissions, gearboxes, valve components, power tools, etc.
• Note: Use a press or special tool (not a hammer) for mounting or dismounting to protect the bearings and extend their life.

• Easy Interchange: Designed as metric bearings, our deep groove ball bearings follow ISO standards and are dimensionally interchangeable with competitor metric products.
• Premium Lubricants: For reduced torque and a quieter operation, Mobil Polyrex EM premium lubricant comes standard on all Timken sealed and shielded deep groove ball bearings. This grease has a temperature range from -29 degree C to 177 degree C.
• Brass Cage Availability: Deep groove ball bearings with brass cages (available in select sizes) can deliver extra strength and durability in the most unrelenting conditions: extreme shock loads, high vibrations and high forces due to acceleration.
• Quiet Running for Electric Motor Quality: Deep groove ball bearings are frequently used in electric motor applications to minimize vibration and noise. To meet our long-standing electric motor quality guidelines we designed in: 1.Super finishing on raceways to reduce friction, 2. Preferred clearance designation (C3), 3. Premium grease for high performance, low torque and less noise.
• Bearing Dimensions: Bore:15mm Outer Dimension:42mm Width:13mm Radius:1.0mm

• Cork sandwich Pads are laminated pads having 1/2\" thick close grained cork securely bonded between two layers of 1/4\" alternate low high ribbed Neoprene rubber pads
• Offers highest level of sound attenuation and vibration isolation
• No need for bolting
• Two neoprene pads for oil resistance and to provide a non-skid surface

• [1]: APPLY TO - Can be used in shop and home repairs, DIY projects, appliances and lawnmowers, electronics, etc.
• [2]: SPECIFICATION - Outer Diameter: 7mm/0.28\"; Wire Diameter: 0.5mm/0.02\"; Free Height: 15mm/0.59\"
• [3]: DESIGN - 304 stainless steel wire has good mechanical properties, wear resistance, low-temperature resistance, corrosion resistance, thermal expansion, and the thermal insulation performance is excellent, with good processing performance, and high toughness characteristics.
• [4]: ADVANTAGE - Compression springs are open-coil helical springs used to absorb shock in various applications. Spacing, highlight curve, stable force, high plasticity, and full elasticity.
• [5]: QUANTITY INCLUDED - 20Pcs x Compression Spring

• [1]: APPLY TO - Can be used in shop and home repairs, DIY projects, appliances and lawnmowers, electronics, etc.
• [2]: SPECIFICATION - Outer Diameter: 16mm/0.63\"; Wire Diameter: 1mm/0.04\"; Free Height: 40mm/1.57\"; Compressed Length: 24mm/0.94\"; Load Capacity: 5.9N; Spring Rate: 0.37 N/mm
• [3]: DESIGN - 304 stainless steel wire has good mechanical properties, wear resistance, low-temperature resistance, corrosion resistance, thermal expansion, and the thermal insulation performance is excellent, with good processing performance, and high toughness characteristics.
• [4]: ADVANTAGE - Compression springs are open-coil helical springs used to absorb shock in various applications. Spacing, highlight curve, stable force, high plasticity, and full elasticity.
• [5]: QUANTITY INCLUDED - 5pcs x Compression Spring

• Alloy steel for durability and resistance to deformity under heavy loads
• Single-row deep groove geometry for high speeds and supporting both radial and axial loads
• Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision
• SKF is a world leader in the design and manufacture of bearings. SKF Bearings are best in quality and are suitable even for high speed applications.
• Deep Groove Ball Bearing, with steel shield on both sides

• [Brand New] 100% Brand new and high quality.
• [High Quality Aluminum] This ballscrew nut bracket is adopted of high quality aluminum material, sturdy and durable.
• [Fits For] This ballscrew nut housing seat fits for SFU2005 / SFU2010 ball nut.
• [Convenient To Replace] As mechanical ballscrew parts, convenient to replace the broken one.
• [Wide Application Scope] Suitable for lathes, grinding machines, milling machines, drilling machines, integrated processing machines, EDM machines, boring machines, wire cutting machines, precise measuring instruments, woodworking machines, handling machines, transport equipment.

• Laterally stable springs with neoprene top and base
• Color-Coded springs according to load ratings
• Non-skid bolt down base. Plated leveling/lock bolt.
• Isolates low frequency vibration. Springs are designed for 50% overload capacity
• Compliance - Springs designed according to BS 1726 (Part 1) and recommendations made by SAE (US) and ASHRAE

• [SIZE] - Model: SCE2216 (I.D. (Fw)= 1-3/8\", O.D. (D)= 1-5/8\", Width (C)= 1\")
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Dynamic Load Rating: 27500N, Static Load Rating: 59000N, Limit Speed: 8000RPM
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• [SIZE] - Model: BH-2012 (I.D. (Fw)= 1-1/4\", O.D. (D)= 1-5/8\", Width (C)= 3/4\")
• [MATERIAL] - Steel Full Complement Drawn Cup, without Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Dynamic Load Rating: 7250N, Static Load Rating: 12700N, Limit Speed: 5000RPM
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• [SIZE] - Model: NKI25/20 (I.D. (Fw)= 25mm, O.D. (D)= 38mm, Width (C)= 20mm)
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Dynamic Load Rating: 27500N, Static Load Rating: 39000N, Limit Speed: 15300RPM
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore should not be used as a raceway

• [SIZE] - Bore Diameter=85mm, Outer Diameter=110mm, Thickness=19mm
• [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Steel cage
• [CAPABILITY] - Dynamic Load Rating (Cr): 49300N; Static Load Rating (Cor): 131000N; Limiting Speed (Grease): 2000rpm, designed for low speed operation and axial loads only
• [APPLICATION] - Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, ect.
• [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time

• Model - 6309-2RS (I.D.=45mm, O.D.=100mm, Thickness=25mm)
• Material - Rolling Balls are made of chrome steel with excellent surface quality, high hardness, high load capacity, and wear resistance. Cage & Inner Outer Race are both made of stamping steel.
• Features - Single row, double sealed. ABEC1 accuracy, Z1 noise level, C3 clearance grade.
• Capability - Dynamic Load Rating (Cr): 52.8kN; Static Load Rating (Cor): 31.8kN; They are used to accommodate radial and axial loads in both directions.
• Applications - Suitable for all kinds of industrial equipment, rotary motor, roller wheels, office equipment and so on.

• COMPLETE HGR15 LINEAR RAIL KITS: This linear Guide Rail is of 2 * 600mm HGR15 rail shafts, 4 blocks ,1 * anti-reverse SFU1204-600mm ballscrew,1pcs ball nut, 1pcs BF10/BK10, and 1pcs 6.35 x8mm coupling are included in the package.
• HIGH-QUALITY STEEL MATERIAL: Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel, more durable and low nois.Low friction coefficient.high accuracy of the trajectory.
• HIGH PRECISION: Ball linear guide rail provide a smooth, precision, guiding surface?so that the sliding block can roll more smoothly on it with small starting torsion, it does not appear a sliding motion creeping phenomenon which can ensure accurate positioning.
• CONVENIENCE: Steel support rail with pre-drilled holes for easy mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance.The ballscrew movement without stick-slip effect, less heats up, less drive power required.
• WIDE APPLICATION:Perfect for your DIY routers, mills, lathes, widely used in the automation machinery and also suitable for automatic equipment, precision measuring equipment, handling machine, and the shipping device.etc.

• 50 Feet of 4.5mm Poly Rope with 2000LB Breaking Strength and 1000 lbs Load Cap; Free with 2pcs 18-inch Soft Loops
• The housing of the Metal wheel block and Tackle system is made of zinc-plated steel to resist wear and tear, safety hooks hold the hoist safely in place
• Soft loop, Strong, long-lasting polypropylene rope; The plastic shell protects the rope and prevents tangle.
• Manual hand rope hoist: No electricity or help needed, 5:1 ratio lifting power, you can lift a heavy object easily single-handed
• Heavy-duty block and tackle mechanism does almost all the work, perfect for sportsman: hunting, boating, lifting, garage, deer, tree cutting, DIY attic, and many more uses