Industrial & Scientific Store - Power Transmission Products

• Suit for Ball Screw SFU1605
• BALL SCREW KIT CONTAINS: 1 x HM12-57 Nema 23 Metal Stepper Motor Steel Mounting Bracket
• FINE PROCESSING: Stable and durable. High positioning accuracy.
• ADVANTAGES:Nema 23 Metal Stepper Motor Steel Mounting Bracket has a long service life due to low friction, low operating noise,heats up less, reduces the drive power. Low friction loss, high transmission efficiency.
• WIDELY APPLICATION FOR Nema 23 Metal Stepper Motor Steel Mounting Bracket:Suitable for installation on all kinds of machinery; such as: engraving machine, woodworking machinery, printing machinery, machinery, etc.

• 2PCS 250mm Linear Motion Rod Shaft Guide
• 8mm Lead Screw ?250mm??
• 4PCS SK8 Shaft Support,4PCS SCS8UU Bearings
• 2PCS KP08 & 2PCS Flexible Shaft Couplings
• Widely applied in 3D printer, automatic machinery, injection molding machine, CNC machine, etc

• 1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.
• Specification: built-in 1 module 20 teeth bevel gears, 8 mm/ 0.3\" shaft, max torque rating: 5 N.M/ 3.6 ft.lbs , max rotation speed: 1500 rpm, backlash: 5 degree
• Motor drive can be realized with coupling and belt pulley gear.
• Material: Aluminum alloy & Stainless Steel Shaft, Overall Size: 56.2 x 30 x 56.2 mm/ 2.2 x 1.2 x 2.2 inch.
• Note: it's simple steering gear, can not used for high torque and high accuracy CNC application.

• Rubber gasket and liner protect the contents
• Strong latch design keeps contents in while keeping dust and moisture out
• Manual pressure relief valve allows easy opening after changes in ambient pressure
• ntegrated strap slot allows to secure these cases to a tool box, back pack, bicycle and more
• Exterior dimension is 6.25\" x 4.5\" x 2\"
• Approximate interior dimensions: 5 x 3.5 x 1.75
• 12 month limited warranty

• Professional Quality Tapping block is made of heavy duty UHMW plastic.Has ultra-high abrasion resistance, corrosion resistance, impact resistance and moisture resistance.Our UHMW tapping blocks are built to last.
• Many Uses Tapping blocks help with floor installation, used to tap laminate into place, DIY handmade, easy to cut, easy to machine into parts, precision parts can be made using techniques such as CNC machining, bending and heat gun forming.
• Various Sizes Our tapping blocks are available in a variety of sizes and are professionally machined to cut to meet the vast majority of needs.
• High-quality Raw Materials It is the UHMW that makes up the tapping block. UHMW is 10 times heavier than ordinary HDPE. Also has excellent impact strength at low temperatures. Its light weight, low friction, high quality sliding material and strong thermal insulation make it a popular choice for consumers.
• Buy With Confidence We provide 100% satisfied customer service, if you are not satisfied with the product, please contact us! We will reply within 12 hours to solve any problem for you.

• COMPLETE BALL SCREW KITS- This CNC kit includes 1pcs SFU1610 400mm ball screw with end machining, 1pcs ball screw nut, 1set BK12/BF12 end support, 1pcs 6.35mm x 10mm BR coupler and 1pcs DSG16H nut housing.
• HIGH QUALITY MATERIAL- CNC parts ball screw is made of high quality carbon steel and aluminum alloy, more wear-resistant and extend the life of the ball screws many times over.
• PREMIER BALLSCREW SYSTEM- The product can ensure coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
• MAIN FEATURES- The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
• WIDE APPLICATION- SFU1610 linear rails apply for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc.

• 100% Size inspection ensures proper installation
• Chrome steel is manufactured to be strong and durable
• Double seals prevents impurities from enter.
• Reduce parts cost and replacement frequency
• XIKE bearings are your simple and efficient choice

• Lifetime Warranty

• Features: Needle thrust bearing can only bear axial load in one direction.
• Function: Used in combination with two thrust washers for applications where adjacent machine parts cannot be used as raceways.
• Materials: steel cage guide rail and evenly distributed rollers, reduce friction, vibration, and noise, high temperature bearing steel, with wear resistance, heat resistance, durability, and other characteristics.
• There are three sizes of bearings for you to choose from, you can purchase the proper size as you need.
• Rolling bearings are widely used: from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts, and aggregate crushers.

• ID:5/8\"; OD:1 1/8\"; Width:1/2\"; Set Screw: 5/16-18 - 1/4;
• Material : High quality Carbon Steel with Zinc Plated Coating;
• Package Content : 4-Pieces 5/8\" Zinc Plated Shaft Collars with 4Pcs Set Screw.

• M8 Screw Stainless Steel Connector to Quick Air Connector
• Dimension: Length: 7.1 cm / 2.79\" ;Color: silver
• Application: Reciprocating Linear Actuator/or for industrial connection purposes

• Size - B Type, 9 Teeth 2.8mm thickness, 6mm (0.24\") Bore Diameter, 6.35mm (1/4\") Pitch, Overall Size: 21mmx15mm / 0.83\" x 0.59\" (D*H).
• Material - Made of stainless steel, good corrosion resistance, heat resistance, low-temperature strength and mechanical properties.
• Feature - The chain Sprocket is usually mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees.
• Application - Used in hardware, milling machine, machinery and other occasions
• Package Content - 1 x Roller Chain Sprocket (included 2pcs M5 set screw).

• Ball screw diameter: 16mm ,Lead/Pitch: 5mm , length:
• Material:Bearing steel and aluminum alloy
• Package includes: 1 x Ball Screw, 1 x Nut.
• Be used for CNC machine , electronic machine,industrial needs , ect.

• Ball screw diameter: 16mm ,Lead/Pitch: 5mm , length:
• Material:Bearing steel and aluminum alloy
• Package includes: 1 x Ball Screw, 1 x Nut, 1 x BK12,1 x BF12, 1 x Coupler
• Be used for CNC machine , electronic machine,industrial needs , ect.

• The shaft collar is mainly used to fix one end of the ball guide shaft and can be used as a simple stop to prevent the ball guide shaft from slipping out. Suitable for motor bases, drive shafts, machine tools, and printing machines. Widely used in industrial automation and conveyor belt systems in manufacturing. for daily use also can use for updating lawn and garden equipment like hand trucks, yard trailers, and more
• Material: Zinc Plated Carbon Steel;Color: Silver Tone;Size: 30mm x 45mm x 11.5mm / 1.18 x 1.77 x 0.45 inch
• Set screw shaft collar made of carbon steel, stable performance, oxidation resistance and rust resistance, long service life. The design has good matching performance, closely fits the guide shaft, and has a strong locking force and support force.
• Instructions: 1. Put this ring on the guide shaft 2. Then tighten the screw to make sure the ring is firmly on the guide shaft
• All size above is measured by manual, please allow 0.1-0.5mm error.

• Size:Circel 3--Wire Diameter? 1.26mm--Outside Diameter? 9mm.
• Material:Steel;not easy to break.
• Easy to Install;Unloaded end deflection of 90 degrees.
• Application:Used in DIY woodworking, furniture, repair project and other applications, it is a common accessories that most families need to prepare.
• Package Contains:5pcs 90 degree torsion spring.