Industrial & Scientific Store - Power Transmission Products

• Model Number: 6203 2RS (NO ON PIECE: 1)
• It has a High Rotation Speed
• 6203-2RS is a Rubber Sealed Miniature Ball Bearings (17X40X12) MM. It is a Deep Groove Ball bearing with rubber seals on both sides which gives more friction to it.It supports both radial and axial loads.
• It helps to retain lubricants and it is a good dust prevention seal
• 6203-2RS is known for Heavy Quality bearing. It is widely used in Motor,skateboards, inline skates, scooters or other skating applications, Robotics , DIY PROJECT ,General Engineering, Light and Heavy Industry, Power Tools, Motorcycles, Automotive, Gearboxes, electric tools, scooters, textile industry etc.

• Surface Finish Galvanized
• ShapeSquare
• Thickness 1 mm
• MaterialGI
• Size 300x300x1 mm

• Material: Chrome steel
• Bore Diameter = 20 mm
• Outer Diameter = 42 mm
• Thickness = 12 mm
• Good dust prevention effect

• Easy To Use
• Best Quality
• Perfect Design
• Long Life Service

• Type of Product : Deep Groove Ball Bearing
• Advanced quality Long functionality Perfect size
• Inside Dia : 20mm
• Outside Dia : 47mm
• Width Dia : 14mm

• R144-ZZ Bearing: Both Sides Metal Shielded and pre-Lubricated with Grease, this bearing can effectively save grease,extending the life of machine.
• Low frictional and irregular torque ensure highly efficient power transmission and smooth rotating performance.
• Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
• R144-ZZ Bearing Sizes: ID: 1/8\" x OD: 1/4\" x Width 7/64\". The high accuracy of the bearings enables excellent high-speed performance.
• Designed for many types of applications: Robotic, Medical equipment, 3D Printer, Align Helicopter, Trex700, Jewelry, Hand Piece, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing etc

• Connection Diameter: 6mm to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
• Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
• Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
• NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
• Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.

• Bearing: Both Sides Metal Shielded and pre-Lubricated with Grease, this bearing can effectively save grease, extending the life of machine.
• Low frictional and irregular torque ensure highly efficient power transmission and smooth rotating performance.
• Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
• MR105-ZZ Bearing Sizes: ID: 5mm x OD: 10mm x W: 4mm. The high accuracy of the bearings enables excellent high-speed performance.
• Widely Application: Hand Piece, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing etc

• Vertex Micropipette Fully Autoclavable Single Channel Variable Volume 20-200 ul with increment of 0.2 ul.
• Fully Autoclavable, the micropipette is made of mechanically durable and chemically resistant materials it can sterilize at 121 degreeC, 15 psi for 10-15 minutes without the need for any disassembly.
• Light weight and designed for ergonomics, adjustable rotation, flexible for convenient manual operation.
• 4-Digit clear & large display helps to read clearly volume range and increment from digital display. The piston button is easily rotated to select the desired volume. Tip ejector makes tip changing easy and quick.
• All pipettes are factory calibrated and adjusted to give the volumes as specified with distilled or deionized water to make sure highly accurate.

• MADE IN INDIA
• DIMENSIONS:DIAMETER=9.52 MM
• HIGH QUALITY STEEL BALLS
• APPLICATIONS:Ball bearings, valve industry, ball screws, automotive industry, machine tools, grinding applications

• Pack of 4 of Anti Vibration pads All Rubber 6\" x 6\" x 1/2\" 60 PSI max load
• Crafted for indoor and outdoor applications
• Applications are endless. Air Compressors, HVAC, Stereo Equipment, Treadmills
• Available in Different Sizes
• Anti Vibration Pads 6\" x 6\" x 1/2\"

• Condition- New
• Color as shown
• Material: steel
• Qty - 50 PC
• 10 MM Diamter Steel balls - OMX Brand

• Power (W):0.2 ~ 1W 1 ~ 10W 10 ~ 2200W Power Factor (PF) For 0.2 ~ 5W For 5 ~ 10W For 10 ~ 2000W
• CO (Kg):CO (Kg) Total Usage Time (MIN) Minutes Money (CU) CU
• Tariff (CU/KWh):CU/KWh Timer 000:01 ~ 923:59 (DHH:MM)
• Frequency (Hz):45 - 55Hz Energy (KWh) For 5 ~ 2200W TRMS Current (mA) 0.02 ~ 100mA 100mA ~ 10A

• Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy

• Model : 685ZZ
• Rod Diameter : 5mm (on which bearing rotates)
• Bearing height : 5mm
• Bearing inside diameter : 5mm
• Bearing outside diameter : 11mm