Industrial & Scientific Store - Power Transmission Products

• Model : 603ZZ
• Rod Diameter : 3mm (on which bearing rotates)
• Bearing height : 5mm
• Bearing inside diameter : 3mm
• Bearing outside diameter : 9mm

• High quality abec 1 precision rating
• Steel cage evenly spaces balls for reduced friction, vibration and noise
• Normal radial clearance
• Non-contact metallic shield on both sides to retain lubricant exclude large contaminants

• Long service life
• Durable elastomers
• Material: Rubber

• Lathes, milling, shaping, griding machines
• Power & hydraulic presses, notching machines
• Press brakes, diesel gensets, rolling mills etc.
• Material: Rubber

• The 10 Ampere 100-240 VAC Input

• Deep-groove geometry for high speeds and supporting both radial and axial loads
• Single-row bearing for supporting radial loads
• Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants

• 6200/12-2RS (I.D.=12mm, O.D.=30mm, Thickness=9mm)
• 6200/12-2RS bearings are sealed on DOUBLE SIDES to keep lubricant in
• Made from Chromium Steel (GCr15), with excellent surface quality, high hardness, high load capacity, and wear resistance.
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Specially use for generator

• PACKAGE CONTENT: 2 Pcs x Needle Roller Bearing; Model: CF8/KR19.
• DIMENSION: Roller Size: 19mm*11mm/ 0.75\" * 0.43\"(D*W); Stud Size: M8 x 1.25; Total Size: 19mm*32.2mm/ 0.75\" * 1.27\"(D*H).
• HIGH-PRECISION QUALITY: Made of high-quality bearing steel, which is temperature-resistant, durable and has strong loading capacity. After the bearing steel is quenched, the hardness, corrosion-resistance and abrasion-resistance are improved greatly.
• DUSTPROOF DESIGN: Both ends of the roller are solid sealed. There is no need to worry that dust will enter the bearing, which can extend the service life of this Needle Roller Bearing.
• WIDELY USE: Widely used in many fields such as motors, aerospace, automobile manufacturing, CNC, mechanical engineering, etc. It particularly suitable for the occasions when the radial space is limited.

• Package included:4pcs Rubber Shock Absorber Mounts.
• Thread size:M8;Rubber diameter:30mm;Rubber height:20mm.
• Made of high quality material,durable,aging resistance and abrasion resistance.
• Easy install and removal,they absorb vibrations caused by appliances, reduces noise and structural damage caused by these vibrations
• Suitable for shock-absorbing products,such as air compressor,heavy machinery,fitness equipment,electronic equipment,and other power machinery as damping components.

• Idler pulley for 20 teeth gt2 timing pulley
• Quantity: 1 pc
• Bore size: dia 5 mm

• Special flange bearing F695RS , used in VORON Mobius 2 / 3 3D Printer
• The double-sided lid is sealed to ensure that dust is prevented when printing at high speed.
• Pre-filled with grease, low noise, to ensure the long-lived bearing surface operation.
• G10 steel balls, steel cage, special trench rate, to ensure the stability of rotation.
• Dimensional tolerance inspection for optimum assembly.

• Material - Cast iron housing, chrome steel bearing
• The pillow block set screws are placed at a 90-degree angle to optimize balance between holding power and inner ring distortion. The UCF205 pillow block bearings are relubricatable and offer a full-width inner ring for added stability.
• The UCF205 pillow block bearing unit is equipped with two specially designed setscrews positioned in the inner ring of the ball bearing to lock onto the shaft.
• The UCF205 pillow block bearing also features a positive-contact, three-piece, fiber-imbedded R-seal to protect against harm full contaminants and retain lubricant. The setscrew locking mechanism on the pillow block bearing is easy to install and well suited for reversing applications and normal loads.
• Applications for the UCF205 pillow block bearing include: Construction, Conveyors, Food and Beverage, Packaging and General Industrial Equipment.

• Package Includes One Piece

• A perfect pulley replacement for the motor, you can directly replace the old or damaged pulley.
• High-quality materials, professional manufacturing, stable performance and high reliability.
• Made of high - quality cast iron, it has good toughness, durability and long service life.
• It has precise size, perfect workmanship, easy to carry and store, easy to use.