Industrial & Scientific Store - Power Transmission Products

• Inner Dimension: 12mm Outer Dimension : 37mm Thickness : 12mm ||Weight Per Unit : 60
• Material - Manufactured by chrome steel sturdy and durable
• Application:General Engineering, Light And Heavy Industry, Power Tools, Motorcycles, Automotive, Gearboxes,etc.
• Sealed on both side of the bearing to keep lubricant in. Suitable for complex environment
• Our high-quality bearing is made to reduce your replacement frequency and maintenance cost

• Plate Thickness1mm
• Pure copper sheet suitable for various use
• Usage/Application For Conventional Earthing System
• Shape Square Surface TreatmentHot Rolled

• [MODLE] - Bearing Model: AXK1226 (I.D.=12mm, O.D.=26mm, Thickness=2mm); Washer Model: AS1226
• [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
• [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
• [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
• [CAPABILITY] - 28.6kN Static Load Capacity, 9.86kN Dynamic Load Capacity, 13000RPM Maximum Rotational Speed

• Assembled diameter is 15 mm
• Product dimension is 45 x 40 x 25
• 8,500 rpm
• 180 mm diameter

• Model : 623ZZ
• Rod Diameter : 3mm (on which bearing rotates)
• Bearing height : 4mm
• Bearing inside diameter : 3mm
• Bearing outside diameter : 10mm

• Size: 606-2RS (Inner Dia.=6mm, Outer Dia.=17mm, Thickness=6mm)
• Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
• Made from High Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Same As 606-2RS / 180016. Pre-Lubricated, Easy to maintain

• [SIZE] - Model: NK20/20 (I.D. (Fw)= 20mm, O.D. (D)= 28mm, Width (C)= 20mm)
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Dynamic Load Rating: 18600N, Static Load Rating: 23800N, Limit Speed: 21100RPM
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• 681 (I.D.=1mm, O.D.=3mm, Thickness=1mm)
• 681 bearings are open type for lubricating
• Made from Chromium Steel (GCr15), durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Static load rating of 21 newtons and dynamic load rating of 82 newtons

• Length: 3 Meters/ 10ft; Diameter: 6mm(0.223\"); Material: Urethane.
• High tensile strength, tensile strength, abrasion resistance, impact resistance, anti-oil.
• High-performance urethane flat belting, chemical resistance, plasticizer-free.
• Easy to weld, easy installation, high wear resistance, long service life.
• Used for drive transmission in packaging machine, printing machine, spinning machine, drive motor, porcelain brick etc..

• Product Structure Analysis - Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing Piece+Base.
• Nema23 Stepper Motor - Motor length: 56mm. Motor flange size: 57mm. ?Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 . Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
• 1605 Ball Screw - Drive type: CBX1605 ball screw. Effective travel length: 400mm. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.003mm.
• Slide Block - Length: 60mm. M4 sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum and are oxidized, which is beautiful and generous.
• Main Application - The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of the moving parts of mechanical equipment. It is suitable for CNC machine, placement equipment, laser cutting equipment, spraying equipment, medical equipment, battery equipment and other industrial automation fields.

• Fork Length 800 mm
• Front Wheel ?180x50 mm & 90x50 mm
• Material GradeQ235B
• Over all width 745 mm

• Material : AluminiumIt is 5 mm Bore for 6 mm Width BeltDurable Construction
• In this package 1 x GT2 20 Teeth Aluminium Timing Pulley 5 mm Bore for 6 mm Width Belt
• inner Diameter (ID) (mm) 5 Pitch (mm) 2
• No. of teeth 20 Compatible Belt width (mm) 6
• Width (mm) 16 Weight (gm) 6

• Vertex Micropipette Fully Autoclavable Single Channel Fixed Volume 500 ul with accuracy of ?0.3 ul.
• Fully Autoclavable, the micropipette is made of mechanically durable and chemically resistant materials it can sterilize at 121 degreeC, 15 psi for 10-15 minutes without the need for any disassembly.
• Light weight and designed for ergonomics, adjustable rotation, flexible for convenient manual operation.
• Clear & large display helps to read clearly volume from digital display. Soft press tip ejector makes tip changing easy and quick.
• All pipettes are factory calibrated and adjusted to give the volumes as specified with distilled or deionized water to make sure highly accurate.