Power Transmission Products By uxcell

• Specification: Outer Diameter: 10mm/0.39\";Wire Diameter: 0.8mm/0.01\";Total Length: 50mm/1.95\"
• Material: 304 Stainless steel wire offers good mechanical properties with greater corrosion and heat resistance than music wire.
• Application: Compression spring steel wire spring is used for everything from home appliances to motor equipment, toys, lawn mowers, etc.
• How to use: It can be directly put on the rod products or put into the tube products.
• Package Content: 20Pcs x Compression Spring

• Connection Diameter: 6mm to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
• Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
• Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
• NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
• Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.

• [Size] - 5mm Outside Diameter, 2mm Inner Diameter, 1.5mm Cross-Section Diameter
• [Hardness] - 50 Durometer (Shore Hardness) for resistance to penetration
• [VMQ] - Standard silicone with a wide temperature range from -22? (-30??) to 392? (200??)
• [Application] - Can be used for travel mug cup lids, espresso coffee maker and weldless fitting for brewing
• [Application] - Widely used for Hydraulics and Pneumatics sealing, pressure valve, gas compressor, reaction valve, heat exchanger, boiler, filter, mechanical

• 6701-2RS (I.D.=12mm, O.D.=18mm, Thickness=4mm)
• 6701 2RS bearings are sealed on BOTH SIDES to keep lubricant in
• Made from Chromium Steel (GCr15), durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Static load rating of 532 newtons and dynamic load rating of 928 newtons

• UNIVERSAL DESIGN - 50 x 40mm (Dx H) rubber mount with M10 x 27mm Studs , set of 1 pieces rubber Vibration Mounts
• EXCELLENT DESIGN - rubber mounts shock Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces
• ADVANTAGE - rubber Vibration mounts's rubber has large elasticity and is light and high, which plays a good buffering role and can protect the machine well.
• MATERIAL - The rubber shock absorber's metal and rubber are bonded together using a special process
• APPLICATION - Rubber mounts mainly used for Fitness equipment, air conditioning, bicycle,air compressors, enginers, gasoline engines, water pumps ,Welding machine and other equipments as a damping element

• 6200/12-2RS (I.D.=12mm, O.D.=30mm, Thickness=9mm)
• 6200/12-2RS bearings are sealed on DOUBLE SIDES to keep lubricant in
• Made from Chromium Steel (GCr15), with excellent surface quality, high hardness, high load capacity, and wear resistance.
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Specially use for generator

• [MODLE] - Bearing Model: AXK1226 (I.D.=12mm, O.D.=26mm, Thickness=2mm); Washer Model: AS1226
• [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
• [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
• [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
• [CAPABILITY] - 28.6kN Static Load Capacity, 9.86kN Dynamic Load Capacity, 13000RPM Maximum Rotational Speed

• Size: 606-2RS (Inner Dia.=6mm, Outer Dia.=17mm, Thickness=6mm)
• Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
• Made from High Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Same As 606-2RS / 180016. Pre-Lubricated, Easy to maintain

• [SIZE] - Model: NK20/20 (I.D. (Fw)= 20mm, O.D. (D)= 28mm, Width (C)= 20mm)
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Dynamic Load Rating: 18600N, Static Load Rating: 23800N, Limit Speed: 21100RPM
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• 681 (I.D.=1mm, O.D.=3mm, Thickness=1mm)
• 681 bearings are open type for lubricating
• Made from Chromium Steel (GCr15), durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Static load rating of 21 newtons and dynamic load rating of 82 newtons

• Specification: Outer Diameter: 6mm/0.23\";Wire Diameter: 0.6mm/0.01\";Total Length: 305mm/11.9\"
• Material: 304 Stainless steel wire offers good mechanical properties with greater corrosion and heat resistance than music wire.
• Application: Compression spring steel wire spring is used for everything from home appliances to motor equipment, toys, lawn mowers, etc.
• How to use: It can be directly put on the rod products or put into the tube products.
• Package Content: 1Pcs x Compression Spring

• R4AZZ (I.D.=1/4-inch, O.D.=3/4-inch, Thickness=9/32-inch)
• R4AZZ bearings are shielded on DOUBLE SIDES to keep lubricant in
• Made from Chromium Steel (GCr15), durability and resistance to deformation under heavy loads
• ABEC Tolerance 3 (P6), Z2 Noise Level for most general use
• Static load rating of 161N and dynamic load rating of 446N