Industrial & Scientific Store - Robotics

• INSTRUCTIONS -- wide DC power supply voltage from 6V to 30V, On/off delay timer module support micro USB 5.0V power supply, very convenient and practical for your use.
• FEATURE -- the timer regulable supports reverse input protection, and there is a STOP button for emergency stop function
• ADVANTAGE -- delay relay switch added sleep mode, it will automatically turn off display if no operation in 5 minutes after enabled, and you can press any button to wake it up
• PARAMETERS SAVE SEPARATELY -- you can set different OP, CL, LOP parameters, these parameters were independent of each other and saved respectively.
• LOAD CAPACITY -- DC 30V 5A, AC 220V 5A;Operating Temperature: -40~85.

• 900M-T-3.2D Soldering Bit online in India at wholesale rates
• The Soldering bit is a High-Quality Soldering Iron Tip
• it can be used with any standard 25 W soldering iron.
• Soldering iron tips are available in a huge variety of sizes, diameters and shapes.
• Suitable for All Iron Types

• This is a bh1750 light intensity sensor breakout board with a 16 bit ad converter built-in which can directly output a digital signal
• When objects which are lighted in homogeneous get the 1 lx luminous flux in one square meter, their light intensity is 1lx
• Sensor built 16bitad converter

• Handel Material Wooden
• 1.5 Mtr Long Wire
• Capacity 230V-240V

• BME280, the precision sensor from It, is soldered onto PCB.
• It uses both I2C and SPI

• Working models of science projects kits
• Included 20pcs of male cables and 20pcs female cables
• Suitable as a power or a signal cable for your electronic project like LED light
• Common usage: this 3 pin connector for mini RC helicopter, indoor 3D plane, LED strips, LED wall-washers, LED belt light, curtain light, twinkle light, etc.
• Uniform insulation thickness to ensure easy stripping and cutting

• Standard Attachments Included
• Operating Speed : 0.13sec / 60 degrees (6v no load)
• Stall Torque : 15 kg-cm at 6V

• Cable length: 0.5 meter
• 6pin XH2.54 Female to 4 Pin Dupont Female cable
• One end is 4pin DuPont connector head, another end is 6pin XH2.54 white terminal
• Suitable for NEMA 17 Motor
• NOTE: Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.

• Upgraded processor (nRF52833), 64MHz Arm Cortex-M4 + FPU (Over 4 times faster!)
• A 5x5 LED matrix with 25 red LEDs to light up and can display animiated patterns, scrolling text and alphanumeric characters, Bluetooth Smart Technology.
• Two programmable buttons. Use them as a games controller, or control music on a smart phone, 20 pin edge connector.
• On-board 3-AXIS digital accelerometer, Speaker with touch-sensitive logo button.
• A built-in compass, 3D magnetometer to sense which direction you're facing and your movement in degrees and detect the presence of certain metals and magnets.

• Soldering Iron Tips Size: Outer Diameter: 1/4\" (6.3mm), Inner Diameter: 1/6\" (4.2mm)
• 10 Different Soldering Tips: 900M-T-B, 900M-T-I, 900M-T-K, 900M-T-1.2D, 900M-T-1.6D,900M-T-2.4D, 900M-T-3.2D, 900M-T-2C, 900M-T-3C, 900M-T-4C
• Easy to use, quickly heat with cooper base, good ability to hang tin, not easily oxidized. Great solder tips, lifetime no less than 40,000 welding spots, compatible with a lot of soldering station.
• High Quality Material: made of oxygen-free copper with nickel-plated surface and environmentally-friendly lead-free 900M, fit for lead-free soldering.
• Compatibility: Suitable for Hakko, Radio Shack 64-053, Atten, Quick, Aoyue, Yihua, X-Tronic, Vastar, Sywon, Tabiger, SOAIY, SEALODY and other brand iron station.

• Two selectable differential input channels.On-chip active low noise PGA with selectable gain of 3264 and 128.On-chip power supply regulator for load-cell and ADC analog power supply.On-chip oscillator requiring no external component with optional external crystal On-chip power-on-reset.
• Simple digital control and serial interface: pin-driven controlsno programming needed.Selectable 10SPS or 80SPS output data rate.
• Simultaneous 50 and 60Hz supply rejectionCurrent consumption including on-chip analog power supply regulator: normal operation < 1.5mApower down < 1uA.
• Operation supply voltage range: 2.6 ~ 5.5V
• Operating Temperature Range:-20 degree ~ +85 degree

• Manufacturer : AnandCircuits
• Material: FR3 / Phenolic (High Grade) | Shape : Rectangle
• Size : 120mm X 165mm | White or Yellowish Board
• Package Content : 1 x Universal PCB Board
• Holes provided : Yes

• Size: 150x150x150 mm .
• Material : Cast Iron
• Color : Any which available in stock
• Can be used In laboratory work
• To check strength of concrete
• Heavy quality and well packed