Industrial & Scientific Store - Robotics

• The Soldering bit is a High-Quality Soldering Iron Tip
• Package includes Pack of 5
• it can be used with any standard 25 W soldering iron
• Upgrade your soldering gun with a new tip
• This tip fits all analog and digital irons, and theyre fast to swap, takes only 30 seconds to change out

• Voltage input range: DC 0-25V
• Voltage Analog Resolution: 0.00489V
• Voltage detection range: DC 0.02445V-25V
• DC input connector: Terminal cathode connected to VCC, GND negative pole
• Output interface: \"+\" connect 5/3.3V, \"-\" connect GND, \"s\" connect the A_rduino AD pins

• This is thermocouple j type sensor. Good quality and useful product.
• Useful product
• Good quality

• Condition : A brand new unused, undamaged item that is fully operational and functions as intended. Warranty : 1 Year Manufacturer. Warranty Service : Repair or Replacement.
• 1 Water Level Controller Unit. 2 Carbon Sensors. 1 pack, mounting screw. 1 user manual with technical details.
• Working : This controller will start the motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want. Suitable for 0.1 HP to 5.0 HP Motor. Supply Voltage : 220-270 VAC
• Sensing element : carbon sensor, it is free from oxidation, long life. Any conducting wire can be used for sensor. It can be connected with or without starter. This model suitable for any single phase Starter panel see diagram above for connection. Power ON & OFF LED indication provided.
• Motor ON & OFF indication provided. Tank Empty and Tank Full indication provided. high quality ABS enclosure. compact size.

• BME680 Digital Humidity Temperature Pressure High Altitude Sensor Module is a digital 4-in-1 sensor with gas, humidity, pressure and temperature measurement based on proven sensing principles.
• The gas sensor on the BME680 can detect a wide variety of volatile organic compounds to monitor indoor air quality. The sensor has high-linearity and high-accuracy.
• The BME680 is specially developed for mobile applications and wearables where size and low power consumption are critical requirements.
• he BME680 has features like specific operating mode, optimized power consumption, long-term stability, and high EMC robustness. In order to measure air quality, the gas sensor within the BME680 can detect a broad range of gases such as volatile organic compounds (VOC). To learn more about the BME680 Sensor, you can check BME680 Datasheet.
• 3.3 Volt or 5 Volt compatible, Operating Voltage (VDC) 1.7V to 3.6V

• Current DC Forward (If) (Max):50mA ~ 100mA
• Mounting Type:Through Hole
• Package / Case:Radial
• Voltage Forward (Vf) (Typ):1.2V ~ 1.45V
• Wavelength:850nm ~ 940nm

• Material: Metal With Still Chromed
• Good Product Quality

• Specification Input voltage: 6.5-12v (DC) or USB power supply(5V), output voltage: 3.3V, 5V, maximum output current: < 700mA
• Application This kit is suitable for SCM power expansion, electronic building blocks, intelligent car, Arduino robot, etc.
• Universal The breadboard wires accept resistors, capacitors, transistors, diodes, LEDS, pots and most all other types of components
• Easy to install No welding and tool required, convenient for experiment and DIY projects
• Assorted Lengths Wires 4 lengths of male to male breadboard jumper wires: 12cm, 16cm, 20cm, 25cm

• Working voltage range: Dc 45v- 20v current drain:<60ua voltage output: High/low level signal:33v ttl output detection distance: 3--7m(can be adjusted) detection range: <140 degree
• Delay time: 5-200s(can be adjusted, default 5s +-3 percent) blockade time: 25 s (default) trigger: L: Non-repeatable trigger h: Repeat trigger (default) work temperature:-20-+80 degreec trigger method: L unrepeatable trigger / h repeatable trigger dimension: 32cm x 24cm x 18cm (approx)
• Infrared sensor with control circuit board the sensitivity and holding time can be adjusted

• Model: TP-01 Material: Plastic
• Temperature range: -20?? ~ 500?? (less)
• Connector Type: K Type
• Interface Type: flat plug-in
• Accuracy : ?2.5%/0.75%

• 35 Watt Heating Element for traditional Soldering iron
• pack of 4

• The breadboard sticks on the prototype shield with its self-adhesive backing
• 5v, gnd and raw pins are exposed as well
• Mini breadboard size: 4.4 x 3.4 x 1cm

• Material: High hardness SS Smooth steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
• Size: 6mm OD X 100mm Long
• Feature: The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
• Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.

• Value: 100K ohm
• Wattage: 0.25W

• 5V to 32V Input Voltage Range; 5V to 35V Output Voltage Range; Output Voltage always more then Input Voltage
• Fixed 400KHz Switching Frequency; Maximum 4A Switching Current;
• Built in Over Voltage Protection; Excellent line and load regulation
• Internal Optimize Power MOSFET; High efficiency up to 94%
• Built in Frequency Compensation; Built in Soft-Start Function; Built in Thermal Shutdown Function; Built in Current Limit Function