Industrial & Scientific Store - Robotics

• Two selectable differential input channels.On-chip active low noise PGA with selectable gain of 3264 and 128.On-chip power supply regulator for load-cell and ADC analog power supply.On-chip oscillator requiring no external component with optional external crystal On-chip power-on-reset.
• Simple digital control and serial interface: pin-driven controlsno programming needed.Selectable 10SPS or 80SPS output data rate.
• Simultaneous 50 and 60Hz supply rejectionCurrent consumption including on-chip analog power supply regulator: normal operation < 1.5mApower down < 1uA.
• Operation supply voltage range: 2.6 ~ 5.5V
• Operating Temperature Range:-20 degree ~ +85 degree

• NPN, silicon transistor
• Plastic Package
• Max Collector Continuous Current: 800 mAdc
• Max Collector-Emitter Voltage: 50 Vdc
• Max Collector-Base Voltage: 75 Vdc

• Pitch - 1MM The pitch typically refers to the distance from the center of one conductor to the center of its neighboring conductor. A single FFC can have different pitches between different conductors on the same cable
• Total no of Contacts / PINS - 20
• CABLE LENGTH - 47 CM / 470MM CABLE WIDTH - 21MM
• Contact Position / PIN Face TYPE - 1 OR TYPE - A - SAME SIDE on the Cable

• Dedicated Customer Support: In case you encounter any issues or have questions, our customer support team is available to assist you. We are dedicated to ensuring your success and satisfaction. Feel free to reach out for any technical or product-related assistance.

• This Bread Board is available with Free Connecting Wires (Both Male and Female 10 numbers each)
• Contains Pieces of Red, Green, and Yellow LED's, Electrolytic Capacitors, Rectifier Diodes, Resistors and Micro Tactile Switches
• Elevate your prototyping experience with our bread board. Its your dependable companion for creating testing and refining your electronic projects with precision and ease
• Prefect for prototyping and testing new electronic concepts before integrating them into your projects, saving you time and resources in the long run.
• Flexible and adaptable, which enables you to create custom circuit layouts, experiment with different configurations and bring your creative ideas.

• Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
• High-temperature 120 degreeC, with NM static protection.
• Operating Temperature: 0-150 degreeC
• Maximum Temperature: 150 degreeC
• Open Circuit Voltage: 4.8V

• The Robo Electrixx Soil Hygrometer module is convenient to sense the moisture level of the soil and determine whether the plants have been overwatered or underwatered. It has 2 probes which act as variable resistors. The two probes allow the current to pass through the soil and then it gets the resistance value to measure the moisture value.
• A fixed bolt hole for easy installation | With power indicator (red) and digital switching output indicator (green) | Having LM393 comparator chip | Stable | Dual output mode.
• Dimensions: Panel PCB:Approx. 3x1.5cm | Soil Probe: Approx. 6xcm | Cable Length: Approx. 21cm.
• Soil hygrometer humidity detection module is used to detect moisture in the soil. It is sensitive to ambient humidity. The output level of the module is high when the soil is dry, else the output is low. The sensor can be used to make automatic watering systems.
• Operating voltage: 3.3V~5V | With power indicator (red) and digital switching output indicator (green) | FC-28 with LM293 || Interface Description (4-wire): VCC:3.3 V-5V | GND:GND | DO: Digital output interface (0 and 1) | AO: Analog Output Interface.

• Power Rating: 12W
• Temperature controlled
• Soldering Bit: Micro
• Base Metal Surface
• Low leakage current

• Quad Store - 37 in 1 sensor kit compatible with Arduino Raspberry and other microcontrollers
• Our new packaging comes with our brand name quad store, qr scan code and hologram in the retail package and product list chart to verify authenticity of the product
• Skill level: beginners to advance level
• Package includes: 37 individual sensors in retail box
• Note: starter guide and source code compatible with Arduino IDE is available for download using the link provided in the kit.

• Rating: Max 16A at 250VAC
• Switching Mode: ON-OFF-ON
• Structure: DPDT
• Panel Cut-Out: 25.2 x 21 mm
• Material: Plastic and Metal
• Colour: Black

• Product Type: Carbon Film Led
• Resistance Value: 220 Ohm; Power Rating: 250mW
• Tolerance: 5%; Voltage Rating: 250V
• Maximum Operating Temperature: +155 degreeC
• Number of Terminations: 2; Package / Case: Axial

• Can be Used With hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps etc.
• Features : Float Can Be Reversed For NO / NC By Opening Bottom Lock as Per Your Requirement / Contact : NO / NC
• Stem Material : PP Corrosion Free , Technology : Magnetic Advance Technology , Wire Length : 2 Meter ,
• Ideal Operating Ratings : Voltage: 2 to 50V DC .Current: 1amp / Max Current : 1.2A (DC), Max Switch Watt : 10W
• Switch Configuration : SPST , Float Ball Material: PP With excellent Acid and alkali / alkaline resistance , WIRE : Premium Tin Coated 14/40 Single Core For High Performance

• Model: TF 227??
• Rated Voltage : 250V
• Rated Current : 10A
• Cutoff Temperature : 227??
• Fuse Size : 4 x 13 mm / 0.16 ? x 0.51 ? (D*L)

• Transmission Line Fault Detection Project
• Electrical Engineering Project Making Kit Box
• Fault Detection In Transmission Line Project
• Line To Ground Fault Detection
• Three Phase Transmission Line Fault Detection Project

• 5V DC or AC circuit
• Requires heater voltage, AO output: 0.1-0.3 V (pollution-free)
• Operation Temperature: 10 to 70 degrees celsius
• Heater Consumption: Less than 750mw

• Robotbanao RC522 - RFID Reader /Writer with Cards Kit includes a 13.56MHz RFID-RC522 Reader/Write Module, standard blank RFID chip, Straight header strip, right-angle header strip and a special shaped RFID tag keychain. It uses SPI to communicate with microcontrollers. It supports ISO/IEC 14443 A/MIFARE.
• Flexible interrupt modes | Power-down by software mode | Programmable Timer | 2.5 V to 3.3 V power supply | CRC coprocessor | Internal self-test | Highly integrated analog circuitry
• Dimensions: LxWxH:60x39.5x5mm
• The RC522 operates on 13.56MHz enabling two way (read and write) contact-less communication with a transmission rate up to 424 Kbit/s. It is commonly used in attendance systems and security systems to provide authorization.
• Voltage:DC 3.3V (Do not use 5V supply) | Operating Current:13-26mA | Idle Current:10-13mA | Operating Frequency:13.56MHz | Operating Temperature Range:-20 to 80 degreeC | Max. operating distance in reading/Write mode:50mm | SPI data rate (Mbit/s):10 | Peak Current:< 30mA | Sleep Current:< 80 ?A | Storage temperature:-40 to 85 degreeC | Transfer speed communication:848kBd