Industrial & Scientific Store - Robotics

• Brand Item PB SWISS TOOLS
• Made of durable material
• Features a sturdy construction
• Durable and easy to use

• Non Contact

• For Use With: DS-KIT-1, MX-D001, DS-GUN-1, MX-DS1

• The Gravity: I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently.
• With high anti-interference ability, high stability, and high sensitivity, this Arduino-compatible oxygen sensor can be widely applied to fields like portable device, air quality monitoring device, and industries, mines, warehouses and other spaces where air is not easy to circulate.
• This compact DFRobot oxygen sensor supports I2C output, it can be calibrated in the air, can accurately measure the oxygen concentration in the environment. It is compatible with many mainboards like Arduino Uno, esp32, Raspberry Pi and so on.
• Its effective range is 0~25%Vol, and resolution can reach to 0.15%Vol. It supports wide range input voltage: 3.3V to 5.5V. Moreover, the lifetime is as long as 2 years.

• Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit
• 1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED
• Everything comes in a compact case and very handy
• 13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB
• Includes a training dummy PCB with 70 components, practice your soldering skills

• Specification 30ft 16 Gauge 4 conductor wire(Red & Black & yellow and green & white). Rated voltage: 300V . Rated temperature : 80 degree C/176?. Cond.resistance: 13.7?/KM20 degree C, Insulation resistance: 10M?/KM20 degree C, Dielectric test: 2000AC V/min.Material:PVC+Tinned Copper.
• Extreme flexible 301pcs strands,0.08mm/strand tinner cooper in every conductor, more than 15 million cycles, suitable for chain system.
• Shield wire The shielding layer can shield this electromagnetic field inside the cable. Shielded cables also serve as grounding protection: if there is damage to the core wire of the cable, the leaked current can flow along the shielding layer, such as the grounding grid. At this point, shielded cables serve as safety protection.
• High Conductivity Tinned copper not only has good electrical conductivity, but the tin coating also has the characteristics of strong corrosion resistance and oxidation resistance.It can greatly extend the service life comparing with ordinary copper wire. It is also more suitable for soldering.
• Application It is widely used for chains in data and signal cables, sensor technology, control equipment and computer control engineering and machinery. It can be used for wet conditions but not for outdooor.

• Output Temperature range is 50C-480C,Heats up to 300 celsius degree in 8 seconds,quick thermal recovery
• Input Voltagle is 110-240V,controller is STM32 V3.1S,output Power is 72W(Max 120W)
• Auto-sleep,auto-standby,aluminum alloy station case.
• Package include:Soldering station+S1 handle+T12-K+C1+JL02
• There is no power plug in package,you need to prepare power plug by yourself

• STEPPERONLINE Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor CL57T

• Multifunctional Vibration Monitoring RS485 Modbus RTU, Accuracy F.S ?5%. Real-time capture of 3-axis data: Acceleration(?16G), Angular Velocity(?2000?/s), Vibration Displacement(0-30000um)+Speed(0-50mm/s)+Amplitude(0-180?)+Frequency(1-100Hz), On-chip time and chip temperature.
• Why WITMOTION Vibration Sensor It meets the user's need for all-round measurement of vibration and shock, maintains stable performance in harsh industrial environments, and provides early warning of machine damage, thus avoiding economic losses due to machine failures such as worn bearings, cracked bearings and poor dynamic balance.
• Rugged design Featuring IP68 waterproof rating, high-quality aluminum housing, superior shielded cable, and impact resistance of 20,000g. Magnetic suction installation with up to 70KG of magnetic force ensures the sensor is firmly attached to the equipment for vibration monitoring.
• Analysis Vibration Sensor System Condition monitoring and vibration analysis are seamlessly integrated with WITMOTION PC software, making it quick and easy to analyze and visualize data. Maintenance teams can set it up as needed.
• Attitude Measurement More Accurate & Reliable Sensors integrated MEMS tech and R&D fusion algorithm, low noise level, and increasing measurement accuracy ensuring stable data output. WITMOTION has been focusing on the sensor field for 10 years, providing professional attitude measurement solutions globally.

• IMPORTANT NOTE This kit Does Not include the Micro:bit itself! This starter kit works with microbit v1.5 and v2, 100% compatible with MakeCode Blocks programming. Recommend for anyone interested in beginning to code.

• Compatible with: Arrma Mojave 6S, ARA7604V2 ARA106058 ARA7204;
• Replacement of Parts# ARA310954, AR310451, ARA310953, AR310431;
• This high-quality 142mm CVD Driveshaft is the perfect replacement part for your ARRMA Mojave vehicle, tough steel for long-lasting durability and low wear, precision manufactured dogbone pins for smooth operation in all conditions, precision engineered CVD coupling for ultra-smooth power transfer and low-maintenance;
• These CVD Wheel Axles are amde of super-tough steel for hard-wearing durability and consistent performance on all terrains, precision manufactured to provide a smooth and friction free axle operation in all conditions;
• RCAWD has a professional service team, please contact us when you need help.

• Part Manufacturer: Humminbird; Part Number: 730010-1; UPC: 082324503177
• Temperature range from 25 - 99?
• Cable Length: 20'
• Compatible with the following: Wide W, LCR W, All Wide units with Speed/Temp capability, 200DX, 300TX, 400TX, Tour Series, ProAngler
• Sold as seen in pictures; Note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included

• Genuine OEM replacement part
• Cooper Atkins has built a solid reputation as a leading manufacturer and provider of quality time, temperature and humidity instruments
• Genuine OEM parts provide safety, reliability, and optimal performance
• Approved by original equipment manufacturer (OEM)
• Intended only for designed and specified use

• Model Number: KEYOPO Engine Speed Sensor 4327233 Compatible with Cummins ISB for QSB Engines Track Parts
• Part Number: 4327233 3078155 2872353
• ISO/OEM/ODM/CE
• Versatile, small, responsive, light and durable.
• 6 Months warranty.

• 386 Items in Total: This complete kit includes the most components, modules, sensors and other items compatible with the Raspberry Pi (Raspberry Pi NOT included)
• 5 Sets of Codes: 51 Python codes (compatible with 2&3), 46 C codes, 27 Java codes, 25 Processing codes and 15 Scratch codes (Processing and Scratch codes provide graphical interfaces)
• 1170-Page Detailed Tutorial in Total: Provides step-by-step guide with basic electronics and components knowledge (The download link can be found on the product box) (No paper tutorial)
• 164 Projects from Simple to Complex: Each project has schematics, wiring diagrams, complete code and detailed explanations
• Compatible models: Raspberry Pi 5 / 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (400 and Zero series not compatible with camera and speaker)