Industrial & Scientific Store - Robotics

• Faster Heating The output power of TS80P has been increased from 18W to 36W max. It can heats up in only 8s from room temperature to 572?(300 degree C ), which is 10s faster than TS80. It's equipped with an OLED screen, you can monitor the status of the soldering iron at any time.
• Smart & Safe With a built-in STM32 chip, TS80P can smartly control the rise and fall of tip temperature, and features sleep, automatic power-off, safety protection and other modes. The code application layer is open source; you can develop firmware for the soldering iron freely as needed.
• More Advanced It is powered by USB Type-C interface and PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with the PD2.0 (12V 3A)/QC3.0 (9V 2A) protocol.
• More Convenient TS80P features a brand new easy-push tip fastener, easy push to loosen the soldering tip for quick replacement.It's completely portable and suit your pockets. You can take it anywhere you want and use it while powered by a power bank.
• Kind Tips Feel free to contact us if you have any questions before or after your purchase. We will help you solve the problem.It is a very suitable birthday/ Thanksgiving day/ Christmas/ valentine's day gift for family and friends.

• Four Seasons 35254 2 Pole Radiator or Condenser Fan Motor (35254)

• Based on ESP32 development
• 16M FLASH
• Integrated full-color high-definition IPS display panel and a variety of hardware peripherals
• Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
• Use M5CORE BOTTOM base built-in lithium battery, 15x IO leads.
• Compatible with multi-platform development: UIFlow MicroPython Ar-duino .NET nanoFramework

• Efficient and Fast Soldering Tip Cleaner: Compared to traditional brass wool tip cleaner, this tool can remove dirty solder from the soldering tip in just 2 seconds. This tool is suited for those who need the tip cleaned in an instant for continuous soldering work.Note: The tip cleaner is designed to work with soldering iron tips that have an outer diameter between approximately 4.6mm to 5.5mm (eg. Soldering irons that use 900M series, YIHUA #1200, YIHUA #1300, YIHUA #1401). Before purchasing, please measure the diameter of your soldering iron tip to ensure it falls within this compatible size range.
• Smart Sensor Technology: This soldering iron tip cleaner features infrared sensor detection for automatic activation when the soldering iron tip is within proximity. The brass cleaner is equipped with two rotating brass wool brushes powered by a stepper motor for fast cleaning. Great for improving soldering workflow and efficiency.
• User-friendly Design: This copper cleaner's compact and lightweight design saves the user's precious workspace. It is only 4.33*2.76*2.95 inches (L*W*H) in dimension, ideal for a workbench with limited space. The soldering iron tip cleaner features a heat-resistant metallic front panel to prevent accidental damage when in contact with heated soldering iron tips. The brass cleaner's compact body also includes a detachable solder residue tray for easy cleaning and convenient use.
• Complete Soldering Tip Cleaner Kit: This soldering iron tips cleaner is complete with necessary accessories and replacement parts, such as 2-prong US-specification 12V power adaptor, 4 extra brass wool brushes for replacement, and a pry bar for case opening and brush replacement, an essential addition to your soldering accessories.
• Choose YIHUA with Confidence Enjoy our 12-month US- exclusive manufacturer technical coverage and 24/7 professional assistance on Amazon. Note: This model is designed to operate on 110-127V with a US-standard power plug.

• INTEGRATED FUME EXTRACTOR MOUNT & TOOL HOLDER - The only working platform with a built-in molded slot to accommodate the Aoyue 486 or 486+ fume extractor you may already own! Save space and solder safely!
• NON-REBOUNDING GOOSENECK ARMS - Precision helping hands are super flexible yet will NOT drift from desired position. Platform is 8\" x 8.75\"
• STACKABLE MAGNETIC PCB HOLDERS - Powerful rare-earth magnet pillars can be positioned and stacked anywhere on platform to create an extremely versatile vise for circuit boards of any size. Use with arms for the most stable soldering experience possible.
• HEAVYWEIGHT STABILITY - Arms are secured to the base using a heavy duty lock washer and screw that can withstand large circuit boards without falling over.
• EXPANDABLE DIY SYSTEM - Unique construction allows for creative expansion by adding more arms, magnetic holders, and connecting multiple platforms together to handle the most demanding soldering scenarios.

• Compatible Models: For NuTone/Broan Models 84757, 8832NA \"\"A\"\" UNIT ONLY, JA2B099N, JA2B099, 86652, 86652G, 8662, 99080520, JA2C028G, 8832SA, 8832, 8832NA, 8832N & 8833
• Check Models: This Motor is 84757 motor assembly, It includes the motor and blower wheel, providing a comprehensive solution in one package
• High Quality: The 84757 replacement fan motor is made of high quality. Every motor has been examnined before leaving factory, and each one has been tested before shipping too, it will ensure that you will get good motor replacement
• Specifications: The 84757 motor assembly is 1285 RPM, 120 V, 60 Hz, blower wheel 2-prong plug
• Warranty: We provide 1 year warranty for the 84757 motor assembly. If you encounter any issues with the product, please contact us. We are committed to ensuring customer satisfaction. You can make your purchase with confidence

• Features: EOS S3 MCU + eFPGA SoC: Arm Cortex-M4F Microcontroller: up to 80 MHz operating frequency; up to 512 KB SRAM. Embedded FPGA (eFPGA): 2400 effective logic cells; 64 Kb RAM
• Thing Plus Form Factor: Breadboard-compatible 0.1\" (2.54 mm) pitch headers; 2.75\" x 0.9\" (70 mm x 22.9 mm) footprint; All 20 Feather-defined GPIO + 14 additional GPIO. Interfaces: SWD programming connector for use with USB-TTL converter; USB data signals are tied to eFPGA programmable logic; UART available via I/O headers; I2C available via I/O headers, and Qwiic Connector, SPI, I2S
• Storage: 16 Mbit SPI NOR flash - GigaDevice GD25Q16CEIGR. Sensors: 3-Axis 12-bit Accelerometer - STMicro LIS2DH12TR; Digital pulse density modulation (PDM) microphone with Wake-on-Sound (WoS) feature - Vesper VM3011-U1
• User Interfaces: RGB LED; User pushbutton; Reset pushbutton. Power: USB Type-C connector (regulated to 3.3 V), Single Cell LiPo battery (not included); On-board charging circuitry - Microchip MCP73831/2; Standard LiPo JST connector
• Software: Machine Learning: TensorFlow Lite and SensiML. Real-time Operating Systems: Zephyr RTOS and FreeRTOS. FPGA Tools: SymbiFlow and Renode

• 4 Pole 12 Slot Hi-torque Motor Design
• CNC Machined 6061 T6 Billet Aluminum Heat sink Can
• High Purity Copper Windings Maximizes Efficiency; High RPM ABEC5 Over sized Bearings
• Universal fit, fits all 1/8 brushless cars multi-mounting system for M3 or M4 screws
• Precision balanced rotor, smoothness for best reliability and maximum RPM

• LOW POWER CONSUMPTION: Low power consumption, lithium battery power supply, long battery life, can be charged by mobile phone charger. Charging time is 3.5 hours, working time is 12 hours when fully charged.
• Easy to Carry: The sensor is about 32 x 62.6 x 11 mm / 1.3 x 2.5 x 0.4 inches, small size, easy to carry and store, easy to use and good performance.
• PLEXIGLASS DISPLAY: Plexiglass display, the reading is clearer, accurate, efficient, beautiful and .
• Low Power Consumption: The working current of the pressure sensor is 8mA. It is powered by a lithium battery and can be charged with a mobile phone charger. It can be charged for a long time, which is very convenient.
• FUNCTION: Used for the measurement and display of flexible sensors (flexibility, membrane pressure, force sensors).

• Product Name: K type thermocouple temperature probe sensors.
• Measurement range: 3 Meters Long Measure Range -50 degree C~482 degree C (-58?F~899?F).
• Good insulation: The thermocouple is insulated internally with fiberglass cable, allowing the thermocouple to be formed and bent without fear of cracking.
• Universal compatibility: Compatible with Type-K temperature measuring instruments, fast response time.
• High Accuracy, Ease of Use and Plug in & Play

• NE180-2

• Precision in Every Detail: Elevate your mobile phone PCB repairs with the EVTSCAN 2in1 Adjustable Hot Air Gun Clamp Holder. Crafted from heavy-duty steel, its 360-degree rotation and height adjustability ensure precision, making intricate repairs a breeze. Unleash your skills with confidence!
• Effortless Rework, Seamless Experience: Experience the seamless integration of the BGA Rework Fixture Station Platform. This 2in1 marvel includes a stainless steel plate, large and small air gun holders, and multi-function fixtures. Effortlessly rework your PCB circuit boards with a user-friendly design that enhances your efficiency.
• Sturdy, Stable, and Stylish: The heavy-duty steel base plate provides stability to your workstation. Not just functional, this clamp holder is a stylish addition to your repair setup. Conquer repairs with a tool that not only performs flawlessly but looks good doing it.
• Your Comfort, Your Control: The EVTSCAN clamp holder prioritizes your comfort and control. The adjustable height and rotated mount cater to your ergonomic needs. The included screwdriver and special screw ring facilitate easy adjustments, putting you in charge of your workspace for a comfortable and efficient repair experience.
• Versatility Redefined: Break free from limitations with the EVTSCAN's versatility. The special BGA fixture, combined with the included accessories, empowers you to tackle various repair challenges. From minor tweaks to major overhauls, this 2in1 clamp holder is your all-in-one solution for mobile phone PCB repairs.

• UPDATED VERSION - SEQURE SI012 Pro soldering iron is an updated smart soldering tool. Compatible with T12, TS, SI, GVDA, GD300 and HS-01 soldering iron tips, a variety of tips to choose and use. And it is more convenient to change the soldering tips, no need to install the internal part
• More Humanized Soldering Tool - Larger OLED screen for clear display of more data, convenient to adjust and control temperature for better welding. ?/ degree C conversion to meet your different usage habits. Support more power supplies such as 3S-6S Lipo battery, PD3.0, QC2.0, DC12V-24V power adapter and power bank. Not cordial
• Fast Heating & Auto Start Heating The soldering iron reaches the melting point of 600 in just 8 seconds, without a long heating process before use. Intelligent temperature control range 100 degree C-450 degree C/223?-1000?. You can set the automatic heating mode to save more time on welding.
• 3 MODES This electric soldering iron has 3 modes: work, sleep and stop. After 3 minutes without any operation, the welding iron automatically sleeps to reduce wear. Through key operations or shaking to wake up the iron. If it does not wake up after 6 minutes, it automatically stops to protect the soldering iron and extend its service life.
• WIDE APPLICATION - Necessary tools for welding projects, circuit board welding, home appliance repair, jewelry making, electronic work, DIY soldering, etc.Very suitable for beginners, welders, basic household equipment, welding training, etc.