Industrial & Scientific Store - Robotics

• Specs: Voltage: 12, Continuous Amps: 100, Mounting: Flat 180 (F180), Duty Cycle: Continuous, Case Material: Metal, Number of Terminals: 5, 5/16-24 Threaded Motor & Battery Studs 10-32 Threaded Excitation Terminal Application: AMETEK/Prestolite Motors Weight: 1.13 lbs / 0.52 kg
• Compatible with/replacement for OEM Numbers: : Prestolite SBD4201E, SBD4202D Ramsey Winch 440003
• 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
• 100% New aftermarket Solenoid built to meet OEM specifications

• This is a genuine OEM (Original Equipment Manufacturer) part.

• Standard Tip - Px-60rt-B
• Accurate Temperature Calibration
• Non-Esd, No Iron Stand
• Variable Controlled Temperature - Can Be Adjusted From 250?-450 degree C

• 25 pieces each of 14 color-coded lengths of 0.1 to 5\" solid core insulated wire
• Individually wrapped to prevent mix-up
• Kit contains 350 jumper wires
• Comes in a compartmented plastic case

• Made by ESPRESSIF SYSTEMS
• Based on ESP32-S2
• HMI Development Kit
• 4 extention boards for LCD, Touch, Camera and Audio applications

• The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control
• Whether you want the best servo control available (0.25's resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver
• This fully-assembled version ships with header pins installed

• Portable

• [Configure your FC and ESC via BT]: With the SpeedyBee app, turn your phone into an all-in-one configurator and tune your quad anytime, anywhere. Enjoy the easy way to fly with fully configuring your FC ESC wirelessly.
• [Powerful 50A 4-in-1 ESC]: Built with the robust BB21 MCU and large motor pads for easy soldering. Built with Japan-made filtering SMT capacitors +onboard TVS protective diode, brings a smooth flight experience.Real 50A output, ready for your baddest 6S motors.
• [Onboard Battery Life Indicator]: Built with a 4-level LED battery indicator, now you can fly anywhere worry-free - even without your lipo checker!
• [Change Motor Directions Wirelessly]: Finishing your latest build Just replaced your motor after a crash Take your smartphone out, and configure your motor direction wirelessly with the latest SpeedyBee app. Works for all BLHeli32 / BLHeli_S / BlueJay ESCs.
• [4 sets of LED Pads with Simple Switching]: Need more visibility at night Just solder up your LED strips and blaze the darkest trail you can find. With just one tap on the BOOT button, you can cycle through all different LED presets and pick the one you love!

• Tension and compression can be used sensor
• High accuracy with good stability loadcell 2kg
• Mini size, 4 wires connection
• Oil-proof, waterproof
• Hermetically welded/sealed by adhesive inside

• Lithium Battery Fuel pressure sensor,Low power consumption, powered by lithium battery and long battery life, can be charged by mobile phone charger
• Application Oil pressure sensor,For the measurement and display of flexible sensors (flexibility, film pressure, force sensors)
• Advantages Plexiglass display screen, more clear, accurate and efficient reading, beautiful and
• Small Size With small size, easy to carry and store, convenient to use and with good performance
• Safety Strict quality control and quality assurance, high safety factor, can be used with peace of mind

• Large LCD Screen & Monitor Flow Rate: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly.
• Quantitative Control & Alarm Function: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm.
• Work with All Hall Effect Flow Sensor: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature.
• Wide Applications: Swimming pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than water.
• Package Includes & Warranty: Thread type: BSP, but it can work with NPT thread. The controller will come with G1/2\" flow sensor, G1/2\" solenoid valve(N/C), temperature sensor(it can measure liquid temperature) and 12VDC power adapter.

• GREAT INTERNAL ASIC DEVICES: Internal ASIC devices, high reliability, long life, strong anti - interference performance. It uses corresponding power supply voltage DC5 ~ 26V (open collector output type)
• HIGH PERFORMANCE: It can realize axial load, radial shaft loading 30N, thrust shaft loading 20N. With load short circuit protection, power supply reverse wiring protection
• COMPACT STRUCTURE: High quality incremental rotary encoder with diameter of 38mm. With small size, light weight, compact structure, easy installation
• ROBUST CONSTRUCTION: Stainless steel spindle with higher stability and protection ability, metal shell is more solid and impact resistance
• OUTPUT MODE: voltage output, collector output, complementary output, push pull output, long line drive output, differential output, fork output

• Temperature Range: -40 to 180?F (-40 to 82 degree C)
• Stabilization of Simulator - up to 2 hours
• FDA approved material
• For use with all Type-K thermocouple Instruments