Industrial & Scientific Store - Robotics

• 1600 spring loaded points which are useful for fixing the components such as IC'S, Transistors, Resistances, Diodes & Capacitors etc.
• Three 4mm Sockets are mounted on PCB with additional pins for connections.
• Set of 150 wires (Singe Strands) of different lengths

• Sensor Kit for Arduino, ESP32, ESP8266, Raspberry Pi
• Various sensors, motor, relay, solenoid, LCD, OLED, LED ... (30 types, 69 units) lets you do a lot of creative things
• Great to combine with Official Arduino Board, or other boards to create a starter kit
• This sensor kit is created for beginners, who start to learn electronics
• Tutorials for Arduino and ESP32 are provided

• Application: This starter motor is s direct replacement on V Twin 14HP 16HP 18HP.
• OE Replacement: 393017 394674 394808 497596 399928 495100 498148
• Specifications: The working condition for this new starter motor is 12V. It is CCW rotation model and has 16 tooth.PMDD.
• The Topscope starter motor is a brand new part. All the start motors are manufactured with OE standard. And each of them will be tested before shipping out.
• If you need any help or meet any doubts during usage, please feel free to contact us for solutions.

• Angle sensor outer diameter is only 22mm and 6mm shaft
• Measuring full Angle 360 ?
• Output signal SPI
• The linearity of the Angle sensor is ?0.3% F.S.
• Supply voltage 3.3V DC sensor

• Maximum pressure of 150 pounds per square inch
• 3/8\" national pipe thread
• Maximum of 75 standard cubic feet per minute at 100 pounds per square inch
• Install upstream from regulators
• Temperature range of 40 degrees Fahrenheit to 160 degrees Fahrenheit
• Made in USA
• Manual overnight drain
• Includes sight glass to monitor water levels
• 40 micron bronze sintered filter

• M12 8 position A-Coded data electrical extension shielded cable for actuator sensor vision camera
• Connector aviation M12 A-coded 8 pin male to 8 pin female, shielded, solid and smooth connection
• for sensor, actuator, industrial controls automation, device network deviceNet, CANopen, IO link, profibus, IO link, servo, motor, rail CCTV control system, LED display, power
• Length 10 meter. 24AWG shielded wire PVC jacket
• The 8-pin connector metal shell is connected to cable shielded layer for protecting against electrical interference

• Highly efficient and low noise: with a large 15050 pure copper motor, the fast and quiet fan (3300 rpm.) work with high suction and produces little noise. It can absorb toxic fumes and effectively clean your work area.
• Cost-effective: This solder smoke absorber comes with 2 flexible soldering aid arms that make easy repairs even easier. They attach to the solder smoke absorber with strong neodymium magnets. The arms can be rotated 360 degrees and can be removed when not in use.
• Replaceable filter: the 8 mm thick activated carbon filter mat can effectively filter the toxic substances. The package contains 3 pieces of extra activated carbon filter mat for replacement. It is very easy to replace and it is recommended that you replace the filter every 3 months.
• Safety and user-friendly design: the soldering smoke absorber is made of ESD-safe materials. The carry handle and 1.3 m power cord allow you to move the device easily. 4 non-slip, heavy-duty rubber feet anchor the device to the ground. No assembly required, just plug in and press the switch.
• SATISFACTION GUARANTEED SainSmart offers a one-year manufacturer warranty and lifetime customer support for this product.

• Brand New -- 100% brand new high quality encoder, original standard, strictly full tested to ensure the best quality before shipment, safe to use
• High Quality -- The rotate encoder is made of high?quality materials, which has high precision, stable performance, high sensitivity, can be use for a long time
• Size -- Hollow Shaft diameter 8mm, outer diameter 38mm, more suitable for light industry use
• Practical -- Incremental encoder has no pulse ambiguity problem, has stronger anti-interference, and is more reliable in use
• Easy to install -- This 3-phase incremental rotary encoder is small in size, light in weight, compact in structure and easy to install

• Product Type:Food Service Supply
• Item Package Dimension:8.0 \" L X6.0 \" W X4.0 \" H
• Item Paackage Weight:0.3 lbs
• Country Of Origin: United States

• [High-performance CPU] Equipped with the Internet of Things module K210 RISC-V 64-bit dual-core CPU, it is a system-on-chip (SoC) IOT development kit that integrates machine vision and machine hearing capabilities.
• [Powerful machine vision] It can perform convolutional neural network calculations under low power consumption, for example, image classification tasks based on convolutional neural networks, target detection and face recognition.
• [Sensitive machine hearing] The chip comes with a high-performance microphone array audio processor, which can perform real-time sound source orientation and beam forming. It is mostly used in sound source orientation, voice wake-up, and voice recognition.
• [Easy to program] The development board has been burned with MaixPy open source firmware by default. MaixPy has developed a variety of function libraries, which can be directly called by developers. MaixPy uses Micropython script syntax, developers can edit the script on the computer in real time and upload it to the development board.

• 2pcs double sided solderable PCB prototype board, enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout, for Arduino kits, electronic experiments and DIY projects.
• PCB Dimension:30x40 cm /11.8x15.7\", PCB Thickness: 1.6mm, The hole diameter is about: 1 mm/0.039\". 4 mounting holes at the corners of the board are very convenient for installing them together.
• The proto boards are made of durable FR-4 glass fiber PCB material makes a very solid and sturdy prototype circuit board with about 1.6mm thickness.
• The pcb board is double sided, with the plated holes are pre-tinned/pre-coppered and very solid which makes them very easy to soldering components on.
• Support mass customization. Any problem of our product, please feel free to contact us. We will provide professional pre-sales and after-sales service.

• Product Type: thermocouple wire
• Max temperature ( C): 105
• Min temperature ( F): -20
• Max temperature ( F): 221
• Min temperature ( C): -28

• 2.4mm chisel shaped
• ERSADUR long life tip coating
• Designed for lead-free soldering
• compatable with the following ersa tools: i-CON PICO | i-CON NANO | i-CON with i-TOOL soldering iron | i-CON1 with i-TOOL soldering iron | i-CON2 with i-TOOL soldering iron | i-CON1 C with i-TOOL soldering iron | i-CON2 C with i-TOOL soldering iron | i-CON VARIO 2 with i-TOOL soldering iron | i-CON VARIO 4 with i-TOOL soldering iron

• Polypropylene material
• Side-mount bracket
• 2\" NPT bracket
• Pack of 1

• This environment sensors module gives Jetson Nano Developer Kit the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, IR ray, UV ray, etc.It can also be used to build a robot that can detect motion and orientation.
• Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light. Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
• Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer. Onboard Si1145 sensor, for measuring IR/UV rays
• Onboard SGP40 sensor, for detecting ambient VOC. Onboard 1.3inch OLED display, for displaying environment data in real time
• I2C bus, allows reading and displaying data by just using two wires. Comes with development resources and user manual (python examples)