Industrial & Scientific Store - Robotics

• Measurement range: -58 to 932 f (-50 to 500 c)
• For general purpose temperature applications
• Fast response time
• Compatible with type-k temperature measuring instruments
• Includes surface thermocouple probe

• 1-[Good Feature]: Features color-coded ON-OFF push button controller, this electric switch box directly control your motor power while also provide protect from workshop dust.
• 2-[Size]: Volt: AC220V/240V; Power: 5.5KW 7.5HP; In the package of: 1 Pack x Magnetic Electric Motor Starter
• 3-[Wide Application]: The three phase magnetic switch box great for all air compressor and water applications, as well as motor start-up control occasion, such as textile machinery, drilling, table saws and other mechanical equipment.
• 4-[Material / Unique Design]: The magnetic starter is made of steel housing and a durable contactor, air compressor magnetic start controller with an On-Off button include a push button and On-Off switch rubber grommets.
• 5-[Tips]: Please confirm the correct size before ordering

• Includes the BBC Microbit V2.2 which has new speaker sensor, Built-in 25 LEDs, 2 buttons, motion sensor, buzzer, light sensor, temperature sensor, compass, radio and Bluetooth wireless features make it easy to get you started with more fun projects.
• This is an easy to use electronic board that is very versatile and can be coded many different ways. It can be integrated with other coding tools and on many platforms.
• Coding is easy with online block guide, Javascript and python. Compiles to hex file, which you then copy to microbit (looks like a drive to pc)
• Box contains: 1 microbit v2.2 board, 1 USB cable, 1 battery holder, 2 AAA batteries, user guide. Note the batteries are shipped in green or orange color randomly.
• Free tutorials and project ideas available on the micro:bit website. The instructions are easy to follow for a beginner to learn to code with it.

• Introduction:The bearing hole and the motor mounting stop are processed by the same process, the same clamping and the same tool, maximizing the coaxiality between the screw and the motor after installation
• Material:The bracket is made of high quality material, sturdy and durable,and used 6001 bearings
• Easy Installation:The motor bracket comes with nuts and screws for easy installation and fixing of the motor
• Application: This product is functionally equivalent the BK12 fixed bearing block end support for Ball Screw 16mm and fixed seat / motor bracket for 57mm Nema 23 Stepper Motor/Servo motor/SFU1605/1610/1604/1616/1620
• Advantages: The positioning hole of the integrated motor seat and the mounting hole of the bearing are processed in an integrated manner,Maximizing the four in one of motor shaft center, coupling shaft center, bearing hole shaft center, screw shaft center

• TRAULSEN
• Coil Temperature Sensor
• 337-60071-02
• High Quality
• Weight: .06 lb

• RAB holder with 3 pcs of 400 points breadboard +Electronics fun kit,Compatible with Arduino and Raspberry Pi
• A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
• 140 pcs U-shape Solide Copper Jumper Wires plus 65 PCS Copper Jumpers Meet your project expetation?
• Better improvement on product quality and durablity
• Perfect for Arduino and Raspberry Pi Shield Prototyping and Testing. Powered by Makeronics Technology

• The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity.
• BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz); SPI (up to 10 MHz).
• Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.
• The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings.
• The BME280 sensor is precision sensing solution for measuring barometric pressure with ?1 hPa absolute accuraccy, and temperature with ?1.0 C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ?1 meter accuracy.

• Provides replacement pieces for most Arduino Education kits. It contains 183 parts commonly used in electronic projects in school, universities and at home.
• 10 resistors 220?, 5 resistors 680?, 5 resistors 560?, 5 resistors 1k?, 5 resistors 4.7?, 5 resistors 10M?, 5 resistors 1.2?, 10 resistors 10k?, 5 resistors 1M?
• Several kinds of actuators: 1 Piezo-Buzzer, 5 Red LEDs 5mm, 5 Green LEDs 5mm ,5 Yellow LEDs 5mm,
• 1 Temperature sensor [TMP36], 1 Tilt sensor, 2 Phototransistors,1 Mosfet transistor, 2 capacitors 100 uF, 1 Zener Diode
• 5 Potentiometers, 5 Push buttons 12 mm, 1 optocoupler, 1 steel ball 12mm diameter, 1 Battery Wire 9V with open lead, and much more!

• Universal replacements for thousands of GE 3ARR3 model relays and many other OEM's, Manufactured using the original GE designs and tooling, Proven performance for 40 years
• Contact rating: 35 amps max, break only, Endurance up to 500,000 operations depending on load, Screw type terminals #8-32 thread
• Six (6) quick connect terminals and screws packaged included with each relay
• Central air conditioner compressors, Submersible pump motors, Motors generally over 1/3 HP with start capacitors
• Brand: Titan Ice, Continuous Coil Voltage: 420V, Country of Origin: CHINA, Drop Out Max: 124V, Includes: Six (6) quick connect terminals and screws packaged included with each relay, Pick-Up Max.: 235V, Pick-Up Min.: 209V, UPC: 840899112398

• Dual Purpose: The magneto starter is powerful and can be used for single-phase motors, which is very practical.
• Motor : The motor starter has built in overload and defect , 24 hour intelligent , stable in performance
• Widely Compatible: This motor start control switch starter is suitable for all air compressors, water applications and motor start control applications
• ABS Housing and Waterproof: This starter housing is made of excellent ABS material, sturdy and , the starter is IP55 waterproof, and to use
• Simple and Wiring: The motor starter comes with button for easy , and the housing has four punch out holes for easy wiring

• Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
• Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.
• High quality aluminum enclosure, thickness 1.5mm/0.06\". Diameter M6 / 6mm threaded copper terminals for power supply and load. Connect switch terminal block: pitch 5.0mm/0.197\", wire size 26~12 AWG / 2.5mm square, stripping length 7mm/0.28\", Metric M2.5 slotted screw.
• Operating Voltage: 10 ~ 15V DC, Rated current 50 Amp. Power on indicating red LED. Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green.

• 1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts
• 350 U-shape 0.6mm +/- 0.02mm tolerance in diameter pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit
• ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept Wire With Diameter 20-29AWG;
• Binding Posts Coded Black, Red and Green, Coloured Coordinates for Easy Component Placement
• Perfect for Arduino Shield Prototyping and Testing. Powered by Makeronics Technology

• heavy duty

• Material Material: FR-4 Glass Fiber, Copper; Layers: Double-sided.
• SizeDimension: 200x200mm/ 7.87x7.87 inch(L*W); Thickness : approx. 1.5mm.
• ApplicationsGreat for making PCB Circuit Board, Models. Widely used in product development, DIY experiments, maintenance, production, etc.
• StableMechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate.
• NoteThe oxide layer on the surface of the copper-clad laminate needs to be polished clean with fine sandpaper to ensure that the carbon powder can be firmly printed on the copper-clad laminate during transfer. The surface of the board should be polished bright without obvious stains.