Robotics By Generic

• Maximum Supply voltage: 35V
• Max Operating Temperature Range: +150?C
• Maximum Output current: 50mA
• Storage temperature range: -55 degreeC to +150 degreeC
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Type of Header Pin: Male; Connector Orientation: Straight
• Number of Pins: 40; Pitch: 2.54mm
• Pin Height: 10mm; Length: 101mm
• Width: 2.4mm; Height: 15mm Weight: 2gm
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Material: PVC
• Shape Rectangular
• Usage/Application: Electric Fitting
• Color: White
• Color: White Size/Dimension Length: 6 inch Width: 8 inch Height: 2 inch Approx Weight: 200gm

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• Diameter -35mm Pack of 10.
• Material- copper, colour - White,Gold Tone.
• shape:circle.

• Genuine 555 IC timer
• Turn-off time less than 2 ?s
• precision timing
• Astable or Monostable Operation
• TTL-Compatible Output Can Sink or Source up to 200 mA

• Max Repetitive peak off-state voltage: 600 V
• Max RMS on-state current: 16 A
• Peak gate power: 20 W

• Low forward voltage; High surge overload rating
• Ideal for printed circuit boards; High temperature soldering: 260 deg C/ 10 s
• Types from 600 V up to 1000 V VRRM; Not ESD Sensitive
• Repetitive peak reverse voltage: 1000V; RMS reverse voltage: 700V
• Operating and Storage temperature: -40 deg C to 150 deg C

• Each LDR is QC tested
• Maximum voltage: 150 Volt DC
• Maximum wattage: 100 mW; Spectral peak: 540 nm
• Light resistance (10 Lux): 50-100 Kohm; Operating temperature: - 30 ~ + 70 degree Celsius

• Coil Voltage 5VDC
• PCB Mount Package

• Model - N20 DCMotor
• Easy to use
• Provide by SP Electron
• Most Saleble product

• 1 DC Water pump, 1 Pipe, 1 9v Connector, 1 9v Batt, 1 On-OFF Switches, 1 Push to ON switch
• This is a submersible, waterproof, mini DC water pump for DIY projects
• Uses and applications: School/Science projects, DIY experiments, Irrigation system project, Fish tank, Robotics projects, School and college projects, science exhibition, engineering project, Garden watering system, Aquarium projects etc
• Complete set of DC water pump project kit
• Operating voltage: 3-9v DC, Operating current: 120-230mA, Flow rate: 80-120 L/h

• Prevent screws or small parts from losing plenty of different shape grids designed to help you keep small parts or tools organized, avoid them loss and make desktop clean and neat. Protect your workbench from heat damage heat insulation silicone repair mat heat resistant 932 degreef (500 degreec) high temperature, which can protect the desk from burning.
• High quality heat insulation silicone repair mat has excellent heat resistant performance. It can be resistance to high temperature of 932 degreeF (500 degreeC), which can protect your workbench from being damaged by high temperature. The soldering iron can directly rest on the mat.
• Our solder pad is made of 100% food grade silicone material which meet USA FDA standard, non-toxic and odorless, no harmful to human body; Flexible and durable, it's no problem with service life of 10 to 15 years if normal use, and easy to clean with water.
• Brand new and high quality heat insulation pad Resistance to high temperature of 500 degreeC. Sevaral hole location to set screws,IC chips and small parts. Built-in scale ruler (0 ~ 25 cm ) on top section. Make your repair work easy. A good partner for hot air gun.

• Size 16 x 50 mm
• Operating Voltage: 5V(DC)
• Output Signal: Electric frequency signal, high level 5V, low level 0V
• Sensor Angle: Not more than 15 degrees
• Detection Distance: 2cm-450cm

• Dedicated Customer Support: In case you encounter any issues or have questions, our customer support team is available to assist you. We are dedicated to ensuring your success and satisfaction with the Nano Board CH340/ATmega328P. Feel free to reach out for any technical or product-related assistance.
• Pre-Soldered Header Pins: The board comes with pre-soldered header pins, saving you time and effort during setup. You can start working on your projects right away.
• CH340 USB-to-Serial Chip: The Nano Board features the CH340 USB-to-serial chip, ensuring reliable and stable connectivity with your computer for seamless data transmission.
• ATmega328P Microcontroller: Powered by the ATmega328P microcontroller, the Nano Board provides 16MHz of processing power and 32KB of flash memory, offering ample resources for your projects.
• Extensive I/O Capability: With 14 digital I/O pins (including 6 PWM outputs) and 8 analog inputs, the Nano Board allows for versatile interfacing with various components and sensors.
• IDE Compatible: Programming the Nano Board is effortless with the Arduino IDE (Integrated Development Environment), providing a familiar and user-friendly coding environment.
• Space-Constrained Applications: The Nano Board's compact size makes it ideal for projects with limited space, such as wearable devices, small robotics, and embedded systems.
• Included Mini B USB Cable: The Nano Board comes with a reliable 0.5 Meter Mini B USB Cable, ensuring a stable and secure connection for programming and power supply.
• Compact and Versatile: The Nano Board is a small-sized microcontroller development board that offers versatility and convenience for a wide range of projects.
• Library Support: Benefit from the vast community and extensive library support, enabling you to access a wide range of pre-built functions and resources for accelerated development.

• SS pin moulded within Polypropylene.
• Cable Length: 1.5 Meters.
• Completely insulated wire joints.
• SS-316 pins are used in it to avoid the rust and chemical resistant.
• US standard Tin Plated copper wire

• Size: 75mm (length) x 55mm (w) x 19.3mm (height)
• Weight: 58g
• Pcb color: blue
• board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed