Electricals Store - Conduit Fittings

• Used to secure, ground and seal liquidtight flexible metal conduit to threaded rigid conduit and IMC
• Terminates bonding conductor run externally alongside the liquidtight conduit
• 4 Inch Trade Size. Zinc Plated. Malleable Iron
• 3-11/15 x 5*1/2 x 6-1/2 x 3-3/8
• Wire size: Min: 1 Max 4/0

• Durable construction: Made of 6061-T6 Aluminum, Black Abrasion & Chemical Resistant PVC Insulation, these multi-cable connectors offer secure tightening and long-lasting performance.
• Pre-filled Oxide Inhibitor: Black insulated mechanical connectors are pre-filled with oxide inhibitors to offer protection against corrosion and abrasion
• Easy Re-entry: Our multicable connectors allow only one cable entry per terminal, it provides easy re-entry for troubleshooting, changes and inspection.
• Wide Compatibility: Ohlectric CU9AL dual rated connectors have 3 wire ports and supports wire size from 4-14 gauge ensuring compatibility with both copper and aluminum wires.
• Versatile Use: These 3-way connectors are widely used by contractors and electricians for gutter, raceway and enclosure power distribution applications.

• Gray Iron with Zinc Plating Construction
• Baked On Epoxy Powder Coat
• BlueKote Internal Coating
• Type LU Elbow
• 2-Inch

• Cantex 3/4 in. Dia. x 100 ft. L PVC For Cablemate systems Non-Metallic Tubing

• L-Com Caublkab-1M ?6Pack 40007005799

• Five different hub arrangements
• Accurately machined body comes with blind tapped screw holes

• Material: Steel
• Concrete tight when taped
• For use with EMT conduit
• Standard: E 16592
• Size: 2 inch

• FMCN1662 2.4mm Female Connector Field Replaceable Attachment 4 Hole Flange , .340 inch Hole Spacing 0.015 inch Pin with Metal Contact Ring

• Technical Specification Item - Cord Connector Liquid Tight Cord Connector with Strain Relief Cord

• PVC Coated Conduit Fitting
• Conduit Nipple
• Open on Both Ends
• Threaded
• 3-1/2-Inch x 12-Inch

• 3/4 Inch Offset, Threaded Male Installation
• Die Cast Ball Burnished Mirror Smooth Zinc
• Trade Size 3/4 Inch
• Diameter 1-5/16 Inch
• Length 2-3/4 Inch

• EMT Compression Connectors - Steel - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure.
• Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures
• Concrete Tight (When Taped)
• Male NPSM Hub Thread
• Heavy Steel Walls, Zinc Plated

• PVC Coated Conduit Fitting
• EYS Sealing Fittings
• Vertical/ Horizontal
• EYS
• 3/4-Inch

• PVC Coated Conduit Fitting
• Conduit Nipple
• Close Nipple
• Threaded
• 5-Inch x Close