Elecoman 1 inch 50ft Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit Kit with 5 Straight and 3 90-Degree Conduit Connector Fittings,1in. Dia - Product Features
- PREMIUM Liquid-Tight Conduit -Elecoman 1 flex conduit Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction
- Safety and Sturdiness -Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial,50% lighter than metallic conduits
- Effortless Installation -The liquid tight conduit 1 in Fits is fast, and only one person can complete the work in a few minutes. 1 flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule
- Wide Application HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
- Complete Accessories -1-Inch 25 Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.Flexible Electrical Conduit Length: 25\"?ID?1 inch?OD?1.25inch?Thick: 5.8 mm UL Listed Underwriter's Laboratories File No. E529256
Perma-Cote PMUNF125 Explosion Proof PVC-Coated UNF Conduit Union, Female-Female, 1-1/4-Inch - Product Features
- PVC Coated Conduit Fitting
- Conduit Union
- Female-Female UNF
- Explosion Proof
- 1-1/4-Inch
FHIS-D10 Plunger Style Lubricants Dispensing Valve (Microvalve) - Product Features
- Fhis-D10 Plunger Suction Dispensing Valve
- Suction Type Plunger Style
- Dimensions (mm) 20 (H) 126
- Weight: 76g
Liquid Tight Connector, 1-1/2 in, Straight - Product Features
- 1 1/2\"
- 1.25-1.38\"
- ALU
- CORD CONNECTOR
- STRAIGHT MALE
Crouse-Hinds 20X Conduit Fitting Threaded Locknut, Steel, 4-Inch (10-Pack) - Product Features
- Threaded Locknut
- Steel Construction
- Rigid/IMC
- 4-Inch
- 10-Pack
OHLECTRIC 10 Pack - Single Side Entry - 2 Port - 4-14 AWG - Black Insulated Connector - Slotted Allen Hex - Pre-Filled with Oxide Inhibitor - Rubber Vinyl Coating, 6061-T6 Aluminum CU9AL - Product Features
- PREMIUM QUALITY: Our splice connector with 6061-T6 Aluminum is suitable for Copper and Aluminum wires
- PROTECTIVE COATING: This black connector is vinyl coated to protect from corrosion and abrasion
- SINGLE-SIDED ENTRY: Permits single-side entry of wires with one wire per terminal capability
- EFFECTIVE CAPACITANCE: Our cable connector has high-dielectric strength for good insulation property
- PREFILLED COMPOUND: Polaris connector is prefilled with oxide inhibitor to improve conductivity and service life. Aluminum wire connectors allow easy re-entry for changes, inspection, or troubleshooting
Thomas & Betts 5263 Liquidtight Gasket (Pack of 25) - Product Features
- Steel Retainer Protects Seal from Extruding Out Under Torque and Limits Compression to an Optimum Predetermined Value
- Provides High Quality Seal
- Used With an Externally Threaded Connector
- Provides a Tight Seal Against Oil, Fumes, or Moisture at the Knockout Opening
- Design Locks Resilient Sealing Material in Steel
Eaton Crouse-Hinds T47 Condulet Form 7 Conduit Outlet Body, Feraloy Iron Alloy, T Shape, 1-1/4" - Product Features
- Feraloy iron alloy,
- conduit outlet body,
- T shape, 1-1/4\"
Perma-Cote PMUNF75 UNF Female to Female Conduit Union, 3/4 in, Ferrous Metal, PVC Coated/Urethane - Product Features
- 13 trade sizes from 1/2 in through 6 in
- 2 mil green urethane interior coating
- 40 mil gray PVC exterior coating
- Molded PVC gasket seals fitting
- Sealing sleeves on all conduit openings
Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in. Dia (50FT) - Product Features
- PREMIUM Liquid-Tight Conduit - Length :50'?ID?1inch?OD?1.22inch The Flexible Non Metallic Liquid Tight Electrical Conduit kit ?is constructed with Resists corrosion PVC to ensure quality and service life.
- Complete Accessories -1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings
- Safety and Sturdiness -Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial,50% lighter than metallic conduits
- Effortless Installation -The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule
- Wide Application -HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lightin
OCAL T&B ST1-1/290-G 1 1/2" PVC COATED 90 deg SEALTIGHT CONNECTOR ROBROY - Product Features
- Before PVC coating is applied, it is double-coated with a nominal 0.002-Inch (2 mil) blue urethane on the interior and exterior
- Has 0.04-Inch PVC coating on the exterior
- Ocal uses genuine Thomas & Betts liquid-tight fittings to ensure quality installations
T&S Brass B-0418 Angle Loose Key Stop, 1/2-Inch Npt - Product Features
- Genuine OEM replacement part
- T&S Brass produces a full line of faucets, valves, and specialty products for the food service industry
- Use genuine OEM parts for safety reliability and performance
Thomas & Betts EYS1-G OCAL PVC-Coated Conduit EYS Sealing Fitting, Vertical, 1/2-Inch - Product Features
- PVC Coated Conduit Fitting
- EYS Sealing Fittings
- Vertical
- EYS
- 1/2-Inch