Conduit Fittings By Thomas & Betts

• PVC-Coated Conduit Fitting
• Type C
• Form 7
• 3-Inch
• OCAL

• Gray Iron with Zinc Plating Construction
• Baked On Epoxy Powder Coat
• BlueKote Internal Coating
• Type LU Elbow
• 2-Inch

• Cantex 3/4 in. Dia. x 100 ft. L PVC For Cablemate systems Non-Metallic Tubing

• Material: Steel
• Concrete tight when taped
• For use with EMT conduit
• Standard: E 16592
• Size: 2 inch

• PVC Coated Conduit Fitting
• Conduit Nipple
• Open on Both Ends
• Threaded
• 3-1/2-Inch x 12-Inch

• PVC Coated Conduit Fitting
• Conduit Nipple
• Close Nipple
• Threaded
• 5-Inch x Close

• Material: Non-Metallic
• For use with rigid/IMC conduits
• The tapered neoprene bushings are resistant to oil, sunlight and water
• Size: 1/2 inch

• Material Type: Iron
• Shape: TB
• Thread Size: 2 IN

• Color: Green

• Material: Non-Metallic
• Color: Gray
• Standard: E 323335
• Size: 2 1/2 IN

• Material: Die Cast Zinc
• Suitable for use in hazardous locations where general purpose equipment is specifically permitted by NEC 501-4(b)
• Standard: E 13938
• Size: 1 1/4 inch
• Meets Coast Guard CG293

• Steel Retainer Protects Seal from Extruding Out Under Torque and Limits Compression to an Optimum Predetermined Value
• Provides High Quality Seal
• Used With an Externally Threaded Connector
• Provides a Tight Seal Against Oil, Fumes, or Moisture at the Knockout Opening
• Design Locks Resilient Sealing Material in Steel

• Before PVC coating is applied, it is double-coated with a nominal 0.002-Inch (2 mil) blue urethane on the interior and exterior
• Has 0.04-Inch PVC coating on the exterior
• Ocal uses genuine Thomas & Betts liquid-tight fittings to ensure quality installations

• PVC Coated Conduit Fitting
• EYS Sealing Fittings
• Vertical
• EYS
• 1/2-Inch