Electrical Breakers & Fuses By Blue Sea Systems

• All positive, negative and grounding buses installed, fully pre-wired
• Panels with meters include toggle switch for mounting up to 3 battery banks
• Accepts Blue Sea Systems\" Large Format Panel label

• All AC and DC buses installed and fully pre-wired
• Label backlighting pre-installed
• ON - indicating LEDs installed in all circuit positions
• 100 Ampere C-Series Toggle Circuit Breaker provides main circuit protection and switching for DC branch
• Maximum panel amperage - 100 Amperes DC, 50 Amperes AC
• MIL-C5541C or equivalent immersion undercoating for lifetime corrosion resistance
• Two-part polyurethane slate gray finish
• Heavy 1/8\" aluminum 5052 alloy

• 200A DC Surface Mount circuit breaker combines switching and circuit protection into a single device
• \"Trip Free\" design cannot be held \"ON\" during fault current condition
• Rated IP66 Waterproof
• Max voltage: 48V DC, Interrupt capacity: 5000A @12V, 3000A @ 24V, 1500A @ 42V
• Terminal Size: 5/16\"-18

• Max Voltage: 250V AC, Interrupt Capacity: 5,000A @ 125V AC, 5,000A @ 250V AC
• Frequently used for 120/240 Volt AC circuit protection
• Can be used as 120/240 Volt AC Main circuit breaker to switch both lines (hots) and neutral
• Will trip all poles if any one pole trips

• Frequently used for 120/240 Volt AC circuit protection
• Can be used as AC Main circuit breaker to switch hot and neutral or two hots in 120/240 Volt AC Branch applications
• Will trip all poles if any one pole trips
• Trip Free design cannot be held ?ON during fault current condition
• 5,000 Ampere interrupt capacity @ 250V AC

• 100 Amp Circuit Breaker. PN: 7044
• All components meet SAE J1171 external ignition protection requirements. Clear, single lever operati
• Recessed mounting holes for clean appearance Self-trimming case eliminates the need for mounting pan

• Combines switching and circuit protection into a single device
• Clear, single lever operation
• \"Trip Free\" design cannot be held \"ON\" during fault current condition

• Drop in replacement for 185-Series Circuit Breakers. Visible reset lever shows open condition
• Ignition protected - Safe for installation aboard gasoline powered boats. Meets SAE J1171 external ignition protection requirements
• Weather Resistant. Combines switching and circuit breaker function into one unit*
• \"Trip Free\" - cannot be held closed after trip. * Do not use as a switch where high inrush currents are expected.
• Amperage: 30A Maximum Voltage: 48V DC Mounting: Surface Mount Circuit Breaker Type: Thermally responsive Bi-metal blade Interrupt Capacity: 3000A @ 48V Minimum Operating Temperature: -40 C Maximum Operating Temperature: 85 C Circuit Breaker Class: Type III - switchable/manual reset - trip free Terminal Stud: M6 (accepts 1/4\" Ring Terminal) Terminal Stud Torque: 50 in-lb (5.65 Nm) Weight: 0.50lb (0.23 kg)

• 100 Amp Circuit Breaker. PN: 7044
• All components meet SAE J1171 external ignition protection requirements. Clear, single lever operati
• Recessed mounting holes for clean appearance Self-trimming case eliminates the need for mounting pan

• Blue Sea Systems
• Intended Use: Industrial, Commercial and Automotive Use.