Electricals Store - Electrical Cables

• Part Number: AT114363 AT55621
• Compatible with John Deere 540B, 540D, 548D, 640, 640D, 648D.
• Overall length: 102\"

• This invisible tensioner kit, which can hide the entire cable railing kit inside the wooden post and metal post railing, makes this cable railing system look neat and beautiful;
• Fits 1/8\" stainless steel cable railings, can be used for deck railings and garden fences, or horizontal cable railings;
• The cable railing kit is made of high-quality marine grade T316 stainless steel, which is rust-proof, durable and beautiful, and easy to maintain;
• Easy to install or remove -This kit needs to be connected to the cable using a hydraulic crimping machine, install with an Allen key while securing the cable with an installation aid socket wrench, it prevents the cable from rotating when tightened;
• This product includes 30-pcs stud kit, 1 hex key, 1 mounting aid socket wrench.

• Application Stair cable railing kit works for 1/8\" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust the length freely. The swage toggle turnbuckle hardware can be used at angle stair railing or horizontal cable guardrail. Suitable for outdoor or indoor.
• T316 Stainless Steel BLIKA cable railing hardware is made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Cable railing Tensioner kit can be used with wood posts.
• Size Turnbuckle = 7 9/32\"(Min) - 10\"(Max) , Deck Toggle End = 3\", T316 stainless steel screws = 1 7/8\". Suitable for 1/8 stainless steel wire rope cable. If using the toggle turnbuckle, lengthen the turnbuckle to allow cable tightening once installed.
• Easy To Install These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic crimper tool & cable cutter: B083Z5JQJ9. It comes with spanner and screwdriver, the spanner multi tool feature tightening jaws specifically for lag screws, swage studs and turnbuckles. Insert one mini screwdriver into the center hole of the turnbuckle to tighten the cable. Please watch our installation video or installation guidance.
• Package List 30 Pair T316 stainless steel swage toggle turnbuckles & swage toggle ends, stainless screws, 1 x spanner multi tool & screwdriver. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us. We are committed to all after-sales, so that buyers can better obtain satisfactory service.

• Perfect for connecting audio and Video CCTV Cameras to DVR
• Make installation easier and more cost effective with this cable
• Suitable for internal or external use
• Video and Power all in one cable
• Ideal for CCTV Camera Installation

• he card meet the module and the Cologne LSA-PLUS series module are compatible.
• Size: (H x W x D): 122.5mm x 21.5mm x 40.5mm (10 pairs)4, use environmental condition: Temperature 5~40?C; Relative humidity <85% (+30?C); Atmospheric pressure 70~106KPa 5, pulling-out force: The gun metal, the silver-plating (20~40uinch) is suitable the line diameter is 0.4~0.6mm, Cheng Duanhou the pulling-out force is not smaller than 25N.
• flame retardance: The plastic uses PBT or is flame-resistant ABS, its combustibility should achieve the GB/T 5169.7-1985 standards.
• life: The card meets the life is not smaller than 200 times.
• The contact point design based on the gas tight principle, causes between the reed and the line cable obtains the reliable connection.

• 1 Pack 5 Cable Channel Cable Protector Ramp: Overall Dimension: 35'' L x 20\" W x 2\" H / 88.9 x 50.8 x 5 cm. Single Channel Size: 1.6\"W x 1.4\"H / 4 x 3.5 cm. Operating Temp: -40~131?. Load Capacity: 18,000 lbs/axle (approx).
• Industrial-Grade Material: This rubber driveway bump is constructed with commercial-grade thermoplastic rubber. PVC cover is designed with skid-proof textures on the surface to provide security for car drivers.
• Flip-open Design: The cable protector ramp with a flip-open cover allows you total flexibility to locate and fix any loose cable regardless of direction. Simply \"snap\" open and push in.
• Modular Interlock Connection: Our nap fit cable protectors are fit for carrying more than one cable or wiring component, avoid accidents, secure the cables, and so much more.
• Easy Installation: Easy to set up and use. It's convenient to connect multiple ramps together for spanning larger lengths of cable. Stable base with grid structure.
• Versatile Application: Particularly suitable in public places like playgrounds, venues, sporting events, exhibition halls, retail premises, squares, temporary emergency applications, and home and office usage.

• All Data - Stainless steel structure with two wheels, a cable with diameter: 6 mm(0. 2\") and length: 200 m(7874\"). Line density: 210 (g/m), tensile fracture: 4200 kg(9259. 4 lbs) and minimum bending radius: 330 mm(11. 8\"), temperature range: - 40-+80 (?).
• Safe Design - Rodder+cage+brake+trolly+wheels. Stainless steel bracket+HDPE protective layer wear resistance, aging resistance, acid and alkali resistance, non-conductive.
• High Performance - Applied glass fiber and high strength resin to improve the tensile strength and strong bending property, convenient to use, adding possibility in actual uses.
• 6 mm Pipe Diameter - With line density: 210 (g/m), it can stand temperature range: - 40-+80 (?).
• Various Applications - For use in telecom, electrical, wall and floor conduit, walker duct and utility installations.