Electrical Cords, Adapters & Multi-Outlets By Knightsbridge

• 13 A 2 G Switched Socket
• Double Pole Switches
• Fitted with t Win earth terminals for use where compliance with BS 7671:2008 regulation 543-7 is required
• Flat Plate low profile design with built in gasket
• Certified to BS 1363:2

• Double Pole Switches
• Complete with integral gasket
• Fitted with twin earth terminals

• Screwless 10AX Intermediate Switch - Matt Black
• An intermediate switch is used when you have three switches controlling one light. A typical example of this is on a landing. There is a switch at the bottom of the stairs, one at top of the stairs and one at the end of the landing. On this circuit you would need the middle switch to be intermediate (i. E. The one at the top of the stairs) in order for all the switches to function properly
• Flawless screwless low profile metal design.
• Certified to EN 60669-1
• Screwless low profile Design with built in gasket

• Single Light Switch rated at 10A, part of the Screwless Range from Knightsbridge - Visit the Knightsbridge Store on Amazon for further products in the range
• This switch is a 2 way switch so can be used either as a single switch, or in conjuntion with a 2nd or 3rd switch lighting circuit. If you are using in a 3 switch curcuit you will need an intermediate switch too. The front cover clips onto the main body when installed, creating a screwless appearance
• Certified to EN 60669-1 for UK installations
• Requires a Minimum mounting back box of 16mm
• If you are unsure about electrical work please contact a qualified electrician
• Knightsbridge SF2000BC 10 A 1-Gang 2-Way Screw less Switch - Brushed Chrome
• 2 way switches are generally used when there are two switches controlling one light
• A typical example of this is when a room has two entrances (like a through lounge) where there is a switch positioned at either entrance
• Made from high quality ultra slim, premium grade material

• Single Light Switch rated at 10A, part of the Screwless Range from Knightsbridge - Visit the Knightsbridge Store on Amazon for further products in the range
• This switch is a 2 way switch so can be used either as a single switch, or in conjuntion with a 2nd or 3rd switch lighting circuit. If you are using in a 3 switch curcuit you will need an intermediate switch too. The front cover clips onto the main body when installed, creating a screwless appearance
• Certified to EN 60669-1 for UK installations
• Requires a Minimum mounting back box of 16mm
• If you are unsure about electrical work please contact a qualified electrician