Surface Wiring By Jienk

• IDC pin pitch 2.54mm/0.1\" male header connector. Standard IDC64 pitch 0.1\" header, you can use 64pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
• Din rail mountable - for DIN C45 width 35 / 32 / 15mm rails, Din mount case can be taken apart for panel mount use.
• Wire range: 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 50 Celsius.
• The screw connectors make attaching and removing wires easily. Really helpful in your DIY prototyping project.
• Widely Applications: It is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2x32 64-position header connector. Applications include the Raspberry Pi A+, B+, 2B, and 3B boards, all of which use a 0.1\" pitch 2x32 I/O pin header for their GPIO expansion ports.

• Easy to UseThis RJ45 breakout board provides a convenient method of accessing all the contacts of an 8P8C connector. Each of the 9 connections are brought out to a screw terminal for fast and secure termination to wires.
• Compact DesignThis compact board will fit in tight spaces and has mounting holes to allow it to be securely fastened ensuring a solid connection.
• This RJ45 to screw terminal distribution is for Ethernet/DMX512/RS485/RS422/RS232.
• C45 DIN rail mounting (width 35mm), 15mm din rail compatible. The plastic enclosure on this model protects the board, and increases the overall durability.
• Terminal pitch?5.08mm/0.2\". Adaptor board with 120 termination matching resistor, optional access or not.

• 30Amp 240V 1x6 position terminal block distribution module. Support for multiple module extension connections. Maximum Voltage: 240V, Maximum Current Rating 30A(Single circuit branch current less than 8A).
• Input terminals(+,-): pitch: 9.5mm/0.37\", wire size 22~10 AWG(0.5mm~4mm), stripping length 8mm, Metric M3 slotted screw.
• Output terminals: Pitch 5.08mm/0.2\", Wire range 22AWG ~ 12AWG(0.5mm~2.5mm?.
• Din rail mountable - for DIN C45 width 35 / 32 / 15mm rails, Din mount case can be taken apart for panel mount use.
• This power distribution module, widely used in PLC, servo, DIN track installation, power amplifier, Home electrical, etc.

• 25Amp 240V 2x6 position terminal block distribution module. Support for multiple module extension connections. Maximum Voltage: 240V, Maximum Current Rating 25A(Single circuit branch current less than 8A).
• Input terminals(+,-): pitch: 5.0mm/0.2\", wire size 24~12 AWG, stripping length 8mm, Metric M3 slotted screw.
• Output terminals: Pitch 5.0mm/0.2\", Wire range 24AWG ~ 12AWG.
• Din rail mountable - for DIN C45 width 35 / 32 / 15mm rails, Din mount case can be taken apart for panel mount use.
• This power distribution module, widely used in PLC, servo, DIN track installation, power amplifier, Home electrical, etc.