Switches & Dimmers By OONO

• Working voltage DC 0 to 50V. Maximum total input current 30 Amps. 12 Channels output, each channel maximum output current 10 Amps.
• Input terminals pitch 7.62mm/0.3\", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
• Output terminals pitch 7.62mm/0.3\", wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.
• Rocker switch ON/OFF power output for each channel. With switch power ON LED indication function.
• High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm rail. FR-4 fiberglass dual copper layers PCB.

• Working voltage DC 0 to 50V. Maximum total input current 30 Amps. 6 Channels output, each channel maximum output current 10 Amps.
• Input terminals pitch 7.62mm/0.3\", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw. Support power supply expansion connect to other modules.
• Output terminals pitch 7.62mm/0.3\", wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.
• Rocker switch ON/OFF power output for each channel. With switch power ON LED indication function.
• High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm rail. FR-4 fiberglass dual copper layers PCB.

• This is a simple and practical blinking flasher module, the ON and OFF duration can be adjusted separately. The blinking flasher module is suited for resistive and inductive loads : lightbulbs, wirewound transformers for halogen lighting... (Note: the module no rectification, voltage step-up or step-down function, not suitable for DC lamps). Load on-off control uses solid-state device instead of electromagnetic relays, so there is no need to worry about the life of on-off times.
• Operating voltage AC 100 to 240V(47 to 63Hz). Maximum current: 3 Amp. Maximum load 350 Watts(at AC 115V), 700 Watts(at AC 230V).
• Time-ON 0.1 to 15 seconds and Time-OFF 0.1 to 15 seconds adjustable. The output ON - OFF - ON OFF cycle alternates.
• Two precise 25-turn adjustable potentiometers, you can use a screwdriver to easily adjust the ON and OFF time you need. With LED indication for output status.
• Compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.

• Input control signal version: AC/DC 12V, AC/DC 24V, AC 120V, AC208-277V four versions selectable.
• Output switch SPDT (Single Pole Double Throw), rated current 10A / 277VAC or 10A / 28VDC.
• Packing list: 1x relay module, 1x NPT 1/2 Zinc alloy conduit locknut, 2x M3x50mm screws.
• Polycarbonate plastic enclosure with a NPT 1/2 mounting nipple, LED indicator and pre-wired for a money-saving installation that is easy and quick.
• This is a simple and practical passive relay module, which is very convenient to use. All wires lead out via 1/2 mounting nipple, it can be flexible mounting with your junction box / outlet box. Two screw mounting holes are convenient for you to fix it on the wall or wooden board.

• Input control signal version: AC/DC 12V, AC/DC 24V, AC 120V, AC208-277V four versions selectable.
• Output switch SPDT (Single Pole Double Throw), rated current 10A / 277VAC or 10A / 28VDC.
• Packing list: 1x relay module, 1x NPT 1/2 Zinc alloy conduit locknut, 2x M3x50mm screws.
• Polycarbonate plastic enclosure with a NPT 1/2 mounting nipple, LED indicator and pre-wired for a money-saving installation that is easy and quick.
• This is a simple and practical passive relay module, which is very convenient to use. All wires lead out via 1/2 mounting nipple, it can be flexible mounting with your junction box / outlet box. Two screw mounting holes are convenient for you to fix it on the wall or wooden board.

• Input control signal version: AC/DC 12V, AC/DC 24V, AC 120V, AC208-277V four versions selectable.
• Output switch SPDT (Single Pole Double Throw), rated current 10A / 277VAC or 10A / 28VDC.
• Packing list: 1x relay module, 1x NPT 1/2 Zinc alloy conduit locknut, 2x M3x50mm screws.
• Polycarbonate plastic enclosure with a NPT 1/2 mounting nipple, LED indicator and pre-wired for a money-saving installation that is easy and quick.
• This is a simple and practical passive relay module, which is very convenient to use. All wires lead out via 1/2 mounting nipple, it can be flexible mounting with your junction box / outlet box. Two screw mounting holes are convenient for you to fix it on the wall or wooden board.