Additive Manufacturing Products By 3 idea Imagine Create Print

• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
• ABS is a strong, surface-treatable thermoplastic
• Recommended Extrusion/Nozzle Temperature 210 degreeC - 240 degreeC (410 degreeF - 464 degreeF), Use With Heated Build Platform Is Recommended

• Metal Bar Fine craft and enhanced functions, support not only electricity conduction, but also heat conduction, solving the heat problem after using for a long time.
• Integrated Insertion Design Just gently press the buckle to easily remove and replace the heating ring and nozzle.
• Pen Tip The temperature of the printing pen tip is only 70-80, which will not cause a scald. Aviation non-metallic materials, high-temperature resistant and more assured to use.
• Method to Change Nozzle In order to prevent damage to the nozzle buckle, two small screwdrivers are required to be inserted into the card slot at an oblique 45 degree as shown in the figure, and the pen tip will fall off with a slight push.
• Quality Assurance Built to strict quality control standards, design improved for more durability.

• Uncompromised Quality: with quality control process and rigorous in-house testing, you can rest assured that 3idea will produce beautiful, reliable and accurate printed parts every time
• Easy to Print:Works well with all common printing
• It is suitable for low temperature printing and can be used in any project that requires an aesthetic finishing.
• This filament gives out a glossier finish to the printed model.
• Our engineered filament is here to help you stream your creative outlet

• Very low Current consumption
• Modular Design: Easy installation, the screen is tilted to make a wide vision and easy to operate, it can be fixed directly on the 3D printer base.
• User-friendly UI Interface: Brand-new screen allows easier operation via its simple UI interface.
• Mass Memory: It provides sufficient storage space, and supports to store pictures in JPEG compression mode, further increasing the number of stores files.

• Smooth and shiny like real silk, no extra polishing required, high detail printing results in a beautiful finish. SUNLU high quality silk PLA filament offers art and crafts and 3D projects a silky smooth surface that definitely gives an amazing result!
• These durable PLA SILK filaments are strict tolerances. Diameter 1.75 mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg coil (2.2 lb)
• Complete drying for 24 hours before packing and vacuum sealed with desiccants in nylon bag. Recommended extrusion temperature / filament nozzle of PLA 210-220 degreeC, bed 60-70 degreeC.
• Works and harmonizes perfectly with all standard 1.75mm FDM 3D printers due to the high quality standards in terms of manufacturing accuracy and the small diameter tolerance of +/- 0.02mm.
• One month free trial, refund within 30 days if you are not satisfied. Coil Diameter: 8\" - Coil Width: 2.5\" - Coil Hub Bore Diameter: 2.20\"

• Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
• Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
• Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
• Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
• Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
• Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.

• Fast assembly: Modulated structure allows it to be installed within 10 minutes. Simple and convenient.
• Open-sourced control board provides limitless possibilities to adjust your printers and modify firmware on your will.
• Breaking-resuming Function can continue to print from the same place where it stops, regardless of unexpected power failure, stopping to change the filament, stopping and print it tomorrow.
• High adhesion building platform allows you take down your printing works easier, do not need mask tape and glue stick any more.
• Quieter and more stable printing movement: The V-shaped wheels and V-slot rails on each axis make the printing quieter, more stable, and more wear-resistant.

• Compatible with Snapmaker 2.0 3D Printing Module
• 0.4 mm brass nozzle
• Covered by silicone sock, isolating heated parts to stabilize the temperature and provide protection
• Nozzle material: copper
• Nozzle diameter: 0.4mm

• ?Toughness Enhanced PETG Filaments? ---SUNLU premium PETG filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
• ?Dimensional Accuracy & Consistency?---These tough PETG filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
• ?Clog-Free, Bubble-Free & Easy-to-use?---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. without stringing and warping issues under optimal settings. Recommended PETG Filament Extrusion/Nozzle Temperature 240?10 degreeC (446? - 482?), heated Bed Temp: 70 degreeC - 80 degreeC (158? - 176?).
• ?Wide Compatibility?---Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
• ?Risk-Free?Spool Diameter: 8\" - Spool Width: 2.5\" - Spool Hub Hole Diameter: 2.20\"

• The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials.
• Input diameter 1.75mm, output diameter 0.8mm
• 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

• [Strength and shock resistance] PETG has higher strength and shock resistance, and is stronger than PLA.
• [Adhesion and resistance] With high layer adhesion and resistance, PETG is the most suitable for manufacturing mechanical stress element.
• [Stability Flexibility] High dimensional stability, suitable for flexible printed matter.
• [PETG product parameters] 1.75MM PETG filament (+/- 0.02MM) Weight: Net weight 1KG, total weight 1.3KG included: 1 roll 3D printer PETG filament (high transparency, glossy surface)
• 100% virgin material without cheap plastic fillers or regrind. Vacuum sealed with desiccant

• High-speed solidify. This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of machines as much as possible.
• Strong adhesion of the model and easy to detach after forming. Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
• The material is rigid and tough. Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
• Model's performance is stable. The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion
• Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
• Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
• Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).

• LARGEST ENDER 3D PRINTER BUILD VOLUME: largest Creality Ender-3 S1 plus with the 11.8*11.8*11.8inch larger printing size, can meet more of your printing requirement. Your idea should not be confined. Achieve better print results and a larger print model at a time.
• UPDATE 4.3-INCH TOUCH SCREEN: Creality Large FDM 3D printer ender 3 S1 plus is coming with User-friendly UI supports 9 languages. Automatic dimming out in 3 minutes for energy saving.
• HASSLE-FREE CR TOUCH AUTO-LEVELING: Creality auto leveling 3D Printer ender 3 S1 plus for home use is upgraded by CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.
• SPRITE\" FULL-METAL DUAL-GEAR DIRECT EXTRUDER: Brand new direct extruder, lightweight and powerful, ensuring smooth feeding and perfect printing even with flexible filaments. PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio.
• QUICK ASSEMBLY, EASY TO HANDLE: The ender3 s1 plus is 96% pre-installed, 6-step assembly, easy to use. Also like Ender 3 S1 and Ender3 S1 Pro, Ender 3 S1 Plus also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Plus works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print,
• POWER LOSS RECOVERY & FILAMENT SENSOR: Ender-3 S1 Plus features the function of detecting filament runout or breakage/power loss and resume printing after recovery, helps to avoid the waste of filaments and time caused by accidents.
• Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 Plus 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.
• 300*300*300 mm Build Volume Print larger-size models, meet more printing needs.
• Hassle-free CR Touch Auto-leveling Quick leveling with automatic height compensation for 16 points on the heatbed.
• Power Loss Recovery & Filament Sensor Ender-3 S1 Plus features the function of detecting filament runout or breakage/power loss and resume printing after recovery, helps to avoid the waste of filaments and time caused by accidents.

• Amazing build volume - With an extraordinary print size of 300 x 410 mm, amazing prints can be made in the best quality!
• Ultra-fast printing - With a print speed of up to 400 mm/s, you can save up to 70% of the print time!
• Pre-installed Klipper firmware -The V400 comes with Klipper firmware pre-installed. Klipper allows a first-class printing experience and ensures high user-friendliness - even via WiFi!
• User-friendly display - An easy-to-use 7-inch LCD touchscreen makes handling particularly user-friendly! The display is powered by KlipperScreen.
• Great quality - thanks to dual linear rails High-quality grooved linear guides ensure incomparable stability during printing. The resulting lines are smoother and more precise, which is clearly noticeable in the quality of the 3D printing!

• High quality PLA filament optimizes printing results : High purity PLA filament with low shrinkage and good toughness. Ensuring smooth printing and good printed objects. ( Less Tangle ) (No Bubbles) (No Clogging ) (Good Adhesion )
• Wide compatibility : Flashforge PLA filament is suitable for all mainstream FDM 3D printers that works with 1.75mm-in-diameter filament.
• Environmentally friendly for use : This PLA filament is extracted from corn starch, which is odorless and harmless for school class and family to use.
• Printing temp: 190~220 lower than other filament low material shrinkage stable printing size
• Match up with PVA, printing models which are hollow-out and have large inclination angles
• Details such as sharp corners and edges print well and PLA printed objects will generally have a glossier look and feel
• Performance -Flashforge PLA 1.75 mm filament is a high-performance PLA material with much great strength and toughness, and its environmental friendliness, no smoke and no odor;Low material shrinkage, stable printing size
• Clog-Free, Bubble-Free & Easy-to-use - Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag; Recommended PLA Filament Extrusion/Nozzle Temperature 190-220 degree, no need heating raft, low demand to printers
• Less -tangle and Easy to Use - Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother

• Material: PLA(Polylactic Acid) - Color: White-Matte Finish - Weight: 1 KG (approximately 2.20 lbs) Spool
• Size: 1.75mm,Tolerance Level : ? 0.03mm - Spool Diameter: 7.87\" - Spool Width: 2.83\" - Spool Hub Hole Diameter: 2.20\"
• Recommended Printing Temp/Nozzle Temperature: 195-220 degreeC(383-428 degreeF) - Base Plate Temperature: 20-50 degreeC(68-122 degreeF), PLA filament can be processed at 185 degrees
• Performance Advantages: The strength and toughness of our PLA filament is higher than the general PLA filament on the market. The air is filled with slightly sweet smell likes candy when printing
• Non Toxic: All of products have passed the RoHS Directive, made by 100% polylactic acid.