Additive Manufacturing Products By R QIDI TECHNOLOGY

• PET Filament Filled Carbon Fiber 15% Carbon Fiber is combined with 85% PET to form a strong filament which has low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. Carbon Fiber PET filament has higher rigidity and strength than normal PETG filament.
• Carbon Fiber Filament - Tangle Free Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping. It is no warpage and no shrinkage and no smell, no heating chamber are required during the printing process.
• Vacuum Aluminum Foil Seal & Moisture Free QIDI TECH PET Carbon fiber 3D printing filament is vacuum sealed with desiccants in a aluminum foil packag to effectively protect the filament from moisture enabling much smoother and more stable printing. Please remember to put it back into the bag timely after use to maintain excellent printing performance.
• Excellent Mechanical Properties QIDI carbon fiber filament 1.75mm is an enhanced composite carbon fiber PET material, developed with the latest formula. The smart fiber reinforced technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
• Tips for Printing Compatible with most of FDM 3D Printers that use 1.75MM filament. Recommend Extrusion / Nozzle Temp: 280 degree C - 300 degree C, Bed Temp: 70 degree C - 80 degree C, Fan Speed: Off, Print Speed: 40-200mm/s. Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of brass nozzles, and keep your nozzles clean between every several prints or so.

• Smart Adhesion Technology QIDI S-WHITE can provide a moderate bond strength to the body material through formulation and process modifications, which ensures that the body material can be molded to the support surface and can be easily separated from the support surface of the body material during removal of the support.
• Quick Remove Technology QIDI S-WHITE has dramatically reduced its own interlayer bond strength through formulation and process modifications, and can be easily teared apart during removal process.
• ECO Friendly The QIDI S-WHITE does not require the use of water or solvents during the use process, does not produce water pollution, and is safe and environmentally friendly.

• Keep Filament Dry during 3D printing Wet 3D printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. The QIDI TECH filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion.
• Comprehensive Dust-proof & Moisture-proof This filament dry box's lid is easy to remove and install while providing a secure and airtight seal, which can block the air circulation inside and outside the consumable box as much as possible, which increase the life of filaments. It can improve the printing model stability of water-absorbent filaments, and prevent model printing from drawing wire.
• Space Saving Qidi dry box can be easily installed on the existing spool holder on top of the printer unit, which can keep the filament dry while printing, and greatly save space for you.
• No Preheating & Power Supply This is a great option for independent filament drying without the need for preheat printing. And you do not need any electricity and power supply to keep the drying of the 3D printer filament.
• Reusable Drying Pack The inside of the dryer box is matched with a desiccant to ensure that there will be no changes in air and humidity within 30 days. And it can be reused. You can bake it in the oven at low temperature for 2-5 hours, and then you can continue to use it.
• High Compatibility Support the maximum capacity: ?210*85.5(H)mm. Compatible with 99% of the mainstream 3D filament brands and 1.75mm filament diameters; Works perfectly with PLA?PLA+?PETG?TPU?ABS etc, Including high-end filament PA?PC.

• Time Lapse

• PETG filament 1.75 - Suitable for High-speed Printing Compared to ordinary PETG filaments, QIDI TECH PETG-Tough has high fluidity and requires lower extrusion pressure during the printing process, making it ideal for achieving high speed printing, with a printing speed of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Max3 3D printer.
• Toughness-enhanced PETG 3D Printer Filament PETG-Tough has been modified for toughness and its notch impact strength is more than three times that of ordinary PETG. Thus the improved QIDI TECH PETG-Tough 3D printing filament is a rigid, tough, high-performance material with odorless, high impact resistance and high heat resistance.
• High Compatiblity & Vacuum Aluminum Foil Pack QIDI TECH PETG-Tough 3D printing filament is vacuum sealed in a aluminum foil packag to effectively protect the filament from moisture enabling much smoother and more stable printing. Wide compatibility with most 1.75mm Filament FDM Printers on the market.
• Dimensional Accuracy & Consistency QIDI 3D Printers PETG filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PETG-Tough filament through the extruder, coming out more uniform.
• Recommend Printing Settings We recommend printing the PETG-Tough filament at nozzle temperature of 240-280 degree C, bed temperature of 70-80 degree C, Fan: 100% and printing speed of 40-400mm/s. Note: Please pass the filament through the fixed hole to avoid tangles after use.

• Matte Finish This newly 3D printing filament outputs prints with smooth and non-glossy colors. Qidi PLA matte filament 1.75 has an incredible matte surface finish that helps hide the layers of your print. It's perfect for creations that require an understated, mysterious appearance.
• PLA Matte filament 1.75 - Suitable for High-speed Printing PLA Rapido Matte is a new type of pla matte filament newly developed by QIDI TECH. Compared to ordinary PLA filaments, QIDI PLA Rapido matte can be used for high-speed printing, with printing speeds of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Smart3 3D printer.
• Tangle Free & Moisture Free QIDI TECH PLA Rapido Matte filament 1.75mm is fully mechanically wound and strictly inspected manually, ensuring the line tidy and less-tangle, so as to avoid snap and line breaking. It is dried and vacuum sealed in a package with desiccant.
• Eco-Friendly & Wide Compatibility Made from starch raw materials derived from renewable plant resources, PLA matte filament boasts lower melting temperature, even does not need a heated bed. Odorless, no pollution and non-toxic during the printing. QIDI TECH PLA Matte Rapido filament is perfectly compatible with most FDM 3D printers on the market that use 1.75mm filament.
• Dimensional Accuracy & Consistency QIDI TECH 3D Printer PLA Matte filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PLA Rapido Matte filament through the extruder, coming out more uniform.

• Clog-Free & Bubble-Free Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.

• ABS Strong 3D Filament QIDI TECH ABS 3D filament is a type of strong and durable filament, ideal for printing durable items or functional parts that require higher heat resistance.

• PET Filament Filled Carbon Fiber 15% Carbon Fiber is combined with 85% PET to form a strong filament which has low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. Carbon Fiber PET filament has higher rigidity and strength than normal PETG filament.
• Carbon Fiber Filament - Tangle Free Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping. It is no warpage and no shrinkage and no smell, no heating chamber are required during the printing process.
• Vacuum Aluminum Foil Seal & Moisture Free QIDI TECH PET Carbon fiber 3D printing filament is vacuum sealed with desiccants in a aluminum foil packag to effectively protect the filament from moisture enabling much smoother and more stable printing. Please remember to put it back into the bag timely after use to maintain excellent printing performance.
• Excellent Mechanical Properties QIDI carbon fiber filament 1.75mm is an enhanced composite carbon fiber PET material, developed with the latest formula. The smart fiber reinforced technology greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage.
• Tips for Printing Compatible with most of FDM 3D Printers that use 1.75MM filament. Recommend Extrusion / Nozzle Temp: 280?C - 300?C, Bed Temp: 70?C - 80?C, Fan Speed: Off, Print Speed: 40-200mm/s. Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of brass nozzles, and keep your nozzles clean between every several prints or so.

• Smart Adhesion Technology QIDI S-WHITE can provide a moderate bond strength to the body material through formulation and process modifications, which ensures that the body material can be molded to the support surface and can be easily separated from the support surface of the body material during removal of the support.
• Quick Remove Technology QIDI S-WHITE has dramatically reduced its own interlayer bond strength through formulation and process modifications, and can be easily teared apart during removal process.
• ECO Friendly The QIDI S-WHITE does not require the use of water or solvents during the use process, does not produce water pollution, and is safe and environmentally friendly.

• Keep Filament Dry during 3D printing Wet 3D printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. The QIDI TECH filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion.
• Comprehensive Dust-proof & Moisture-proof This filament dry box's lid is easy to remove and install while providing a secure and airtight seal, which can block the air circulation inside and outside the consumable box as much as possible, which increase the life of filaments. It can improve the printing model stability of water-absorbent filaments, and prevent model printing from drawing wire.
• Space Saving Qidi dry box can be easily installed on the existing spool holder on top of the printer unit, which can keep the filament dry while printing, and greatly save space for you.
• No Preheating & Power Supply This is a great option for independent filament drying without the need for preheat printing. And you do not need any electricity and power supply to keep the drying of the 3D printer filament.
• Reusable Drying Pack The inside of the dryer box is matched with a desiccant to ensure that there will be no changes in air and humidity within 30 days. And it can be reused. You can bake it in the oven at low temperature for 2-5 hours, and then you can continue to use it.
• High Compatibility Support the maximum capacity: ?210*85.5(H)mm. Compatible with 99% of the mainstream 3D filament brands and 1.75mm filament diameters; Works perfectly with PLA?PLA+?PETG?TPU?ABS etc, Including high-end filament PA?PC.